ford 2000

   / ford 2000 #1  

dave1952

New member
Joined
Apr 12, 2016
Messages
3
Location
geneva ohio
Tractor
1966 ford 2000
hi I am dave and I just joined this sight I have a 1966 ford 2000 and am rebuilding lift cover on the piston the shop manual says put on leather ring and o ring howerver the rebuilt kit has a plastic ring aleather ring and o ring when I tore down piston it has the plastic ringand not the leathe ring the book calls for what ring should I use thanks
 
   / ford 2000 #2  
hi I am dave and I just joined this sight I have a 1966 ford 2000 and am rebuilding lift cover on the piston the shop manual says put on leather ring and o ring howerver the rebuilt kit has a plastic ring aleather ring and o ring when I tore down piston it has the plastic ringand not the leathe ring the book calls for what ring should I use thanks

Most likely the plastic backup ring is a replacement for the OEM leather ring. Install it per the instructions.
 
   / ford 2000
  • Thread Starter
#4  
:anyone:hello Dave 1952 here got a little problem had to buy a new voltage stabilizer for 1966 ford 2000 old one has 3 terminals b and I on same double terminal the third terminal is marked with an E the new one has just 2 double terminals one set marked B the other marked I where do I plug the wire marked E lost:(
 

Tractor & Equipment Auctions

2009 Freightliner M2 106 MedTec Ambulance (A51692)
2009 Freightliner...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2016 Ford Escape SE AWD SUV (A50324)
2016 Ford Escape...
2000 Genie S-60 60ft Telescoping Boom Lift (A50322)
2000 Genie S-60...
2011 New Holland B95B Backhoe (RIDE AND DRIVE) (A50774)
2011 New Holland...
2015 PETERBILT 567 TRI-AXLE (A52472)
2015 PETERBILT 567...
 
Top