Finding kubota diy storage/box, mods

   / Finding kubota diy storage/box, mods #1  

skindaddy

Bronze Member
Joined
May 21, 2009
Messages
74
Tractor
L2501
I know this is vague and prob won't help me but few years back I've seen different mods for diy chain storage boxes on say all the newer Kubota L series, was thinking was in front by step looked factory/ nice.
Also seen stuff for shovels, of course chain saws which I've found alot of those but can't find the other after many hours of searching. Either using wrong phrase or don't recall what I'm thinking. Any help would be great
 
Last edited:
   / Finding kubota diy storage/box, mods #2  
I know this is vague and prob won't help me but few years back I've seen different mods for diy chain storage boxes on say all the newer Kubota L series, was thinking was in front of step looked factory.
Also seen stuff for shovels, of course chain saws which I've found alot of those but can't find the other after many hours of searching. Either using wrong phrase or don't recall what I'm thinking. Any help would be great
I just removed the useless little Kubota toolbox on the ROPs and installed a useful toolbox that fits a 20’ chain plus my tools.
 

Attachments

  • 8E78D34E-976A-4F4B-BD21-DC567370200A.jpeg
    8E78D34E-976A-4F4B-BD21-DC567370200A.jpeg
    2.5 MB · Views: 316
   / Finding kubota diy storage/box, mods #3  
Dont usually carry chain's unless I think I'm going to need them.. But I did this for basic storage (rags, tools, extra clevis pins, mechanics tie wire etc)....

50 Cal ammo box.....

dsc01773-jpg.678206
 
Last edited:
   / Finding kubota diy storage/box, mods #4  
I picked up a cheap tool box at TSC, painted it orange and mounted it on the right side step bracket:

P1060251.JPG
P1060252.JPG


I also used a piece of PVC pipe to make a tray that slides into the Fell bracket cross tube:

P1060218.JPG
P1060221.JPG
P1060220.JPG
 
   / Finding kubota diy storage/box, mods #5  
IMG_2133.JPG
IMG_2138.JPG


Like the steel tubes to carry chains or long tools, chainsaw, or loppers. This one is welded on. Other tractor is bolted on. Robust enough for woods work. Rubber fists can carry 50# long handle tools. $10 a pair on Amazon. Used them on our rescue vehicles.

Projects can be over a mile from the house or barn so good to be prepared. Property is mostly wooded or borders woods so down trees are a constant. Seems more down past couple of years.
Carrying equipment safely is important in our operation. Easy Visual check to make sure tool inventory is accounted for and secure. Plenty of other hazards to focus on while operating a tractor.
 

Tractor & Equipment Auctions

20ft Bumper Pull Equipment Trailer (A51572)
20ft Bumper Pull...
FORD 540 TRACTOR (A51247)
FORD 540 TRACTOR...
Toyota 6FGU25 Forklift  5,000 lb Capacity (A52748)
Toyota 6FGU25...
2020 INTERNATIONAL LT625 (A52472)
2020 INTERNATIONAL...
2016 Kubota RTV-X900 4x4 Utility Cart (A51691)
2016 Kubota...
FIRESTONE 420/85R30 TIRES WITH 8 LUG WHEEL - WHEEL FITS TM SERIES NEW HOLLAND (A52748)
FIRESTONE...
 
Top