Ferris scalping

   / Ferris scalping #21  
Add wheels to the frame, preferably with adjustable heights in case you get it wrong the first time. Weld the mounts to the tool's frame.
 
   / Ferris scalping #22  
I have a IS700z, so not true IS like yours. I mow at 3.25", and was having some scalping issues..leveled the deck and found it WAY off, especially on LH side that seemed to scalp the most. That took care of mine, and adding in 1/4" of pitch also helped it stripe a little better.
 
   / Ferris scalping #23  
Looks like you are making a couple laps around the lawn to have room to turn around and mowing across the lawn do do the rest. It looks like you are turning right where the slope from the road levels out with the lawn so your deck is hitting the edge of the slope. Maybe try making another lap or two so you are turning on completely level ground.
 
   / Ferris scalping #24  
Slow down on turns
Any mower will do that if you turn too fast. Both of mine will do exactly the same thing and I have a JD and a Kubota. I cut grass at 1.5" and if I go slow on turns my mowers don't do it.
 
   / Ferris scalping #25  
A low tire will also give you some scalping on turns. At only 12# on my rear tires, it doesn't take much to allow scalping to happen.
 

Tractor & Equipment Auctions

2017 TAKEUCHI TB240 EXCAVATOR (A52705)
2017 TAKEUCHI...
2006 Magnum 125 125kW T/A Towable Diesel Generator (A53421)
2006 Magnum 125...
Miller Trailblazer 250G 4,000 Watt Welder/Generator Set (A55851)
Miller Trailblazer...
2011John Deere 244J (A47477)
2011John Deere...
2018 Caterpillar D5K2 LGP Crawler Tractor Dozer (A55787)
2018 Caterpillar...
2019 Fecon BH74SS Hydraulic Mulcher High Flow Skid Steer Attachment (A51691)
2019 Fecon BH74SS...
 
Top