Ferris scalping

   / Ferris scalping #21  
Add wheels to the frame, preferably with adjustable heights in case you get it wrong the first time. Weld the mounts to the tool's frame.
 
   / Ferris scalping #22  
I have a IS700z, so not true IS like yours. I mow at 3.25", and was having some scalping issues..leveled the deck and found it WAY off, especially on LH side that seemed to scalp the most. That took care of mine, and adding in 1/4" of pitch also helped it stripe a little better.
 
   / Ferris scalping #23  
Looks like you are making a couple laps around the lawn to have room to turn around and mowing across the lawn do do the rest. It looks like you are turning right where the slope from the road levels out with the lawn so your deck is hitting the edge of the slope. Maybe try making another lap or two so you are turning on completely level ground.
 
   / Ferris scalping #24  
Slow down on turns
Any mower will do that if you turn too fast. Both of mine will do exactly the same thing and I have a JD and a Kubota. I cut grass at 1.5" and if I go slow on turns my mowers don't do it.
 
   / Ferris scalping #25  
A low tire will also give you some scalping on turns. At only 12# on my rear tires, it doesn't take much to allow scalping to happen.
 

Tractor & Equipment Auctions

2013 Magnum Power MLG08 Towable Runway Closure Marker Light Tower (A55851)
2013 Magnum Power...
2021 JOHN DEERE HX14 (A53084)
2021 JOHN DEERE...
2015 Jeep Cherokee Latitude SUV (A53424)
2015 Jeep Cherokee...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2017 Ford Transit Connect XL Cargo Van (A55852)
2017 Ford Transit...
2015 Ford Explorer AWD SUV (A55853)
2015 Ford Explorer...
 
Top