FEL use help please!

/ FEL use help please! #1  

MLB

Silver Member
Joined
Aug 3, 2002
Messages
217
Location
Fort Wayne,IN (NE)
Tractor
New Holland TC33D
Gonna be moving 50 yards of topsoil with my NH TC33(4wd) for a job next week. Tight quarters, slight slope in the newly fenced in yard (in ground pool install). Will I need to keep my box blade on the back for balast or could I take it off? Will be going very slow the whole time.
 
/ FEL use help please! #2  
Your best bet is to keep some weight on the back. Even if your rear wheels are filled, you would be hard pressed to be able to fill your bucket more than half way without a counterweight.

I do that type of close work every once in a while so I made a 600# concrete weight for the 3pt hitch. It is not as wide as a box blade so it doesn't hamper my maneauverability as much.
 
/ FEL use help please! #3  
If you decide to remove your box blade,try backing down the slope slowly when loaded...or take 2/3 or so of a bucket and go forward..may take a little longer but better dinging the new fence etc..
 
/ FEL use help please! #4  
Ditto on the weight, carry the load low and avoid sharp turns - especially with the bucket filled...................chim
 
/ FEL use help please! #5  
If you are loading from a pile there shouldn't be any problem with the box blade removed. If the clearance is critical fill a couple of buckets with gravel and tie them into the three point hitch.
How steep is the slope involved?

Egon
 
/ FEL use help please! #6  
See the thread "Keeping the counter weight on".

Also remember, that when the rears are light on the ground, your brakes are that much more useless.
 

Marketplace Items

2018 howden rotary lobe blower MODEL 24 (A61572)
2018 howden rotary...
John Deere 608C 6 Row Corn Head (A64119)
John Deere 608C 6...
Transfer tank (A61567)
Transfer tank (A61567)
2010 HINO 268 4X2 S/A NON CDL 26FT BOX TRUCK (A59912)
2010 HINO 268 4X2...
Sakai SW354 (A60462)
Sakai SW354 (A60462)
2019 Peterbilt 567 Quint Dump (A62613)
2019 Peterbilt 567...
 
Top