FarmTrac Troubles

[bluechip]

Bill, the engine in your tractor is Daedong (KIOTI) and the chassis is LS, If you have an LS dealer in your area, check with them, we can ship them UPS to you also if needed. We handle both LS and KIOTI.

 

[trac]

I purchased a Farmtrac 8075 DT 2/24/10 and have found when the air conditioner is running I have condensation/water running into the cab and over the switches. I opened up the top of the cab and it looked to me like some hoses were missing to direct the water down the cab posts. I connected hoses but that did not fix the problem. Any suggestions? :confused2:

The hoses you are talking about connect to the drain pan under the evaporator. I assume that they are all in good working order. If conditioned air is getting into the roof compartment, condensation will take place on any of the metal items. That would be mainly moisture laiden on the metal and should not be flowing water. The seals in the evaporator housing
compartment must be leaking causing the condensation. Trac

 

[LAWALLSTRACTOR]

I haven't looked at this forum for a long time. I have a little Farmtrac 270DTC that I bought used several years ago, and it is dependable as a rock so far. I quit trying to keep up with what was going on with the company long ago. Where do I go for filters and preventive maintenance parts now?
Thanks,
Bill in Arkansas

Look for a LS Tractor dealer.

 

[TwoBearBill]

Thanks. I found one. ARTRAC in Arkansas, just a few hours away.
Bill

 

[StevenT]

I have a friend who owns a Montana LS 2740 with some PTO problems, Do you know anyone who can help?
Steve
678 378-4148

 

[redneckford]

HEY TAX---- AND BLUE have they got them there clams cook in the island state yet?????------is anyone suppling escort parts for those former farmtrac from india?

 

[taxpayer]

HEY TAX---- AND BLUE have they got them there clams cook in the island state yet?????------is anyone suppling escort parts for those former farmtrac from india?

Oughta be coming to a boil any day now Red,Who knows what the heck punjabs liable to do??:laughing:

Taxpayer

 

[redneckford]

Oughta be coming to a boil any day now Red,Who knows what the heck punjabs liable to do??:laughing:

Taxpayer

what are they using to cook----e the clams a cigar----- lighter????? at that rate someone is "libable" to get burnt----oh wait----a lot of dealers have already got burnt------

 

[blueliner]

HEY TAX---- AND BLUE have they got them there clams cook in the island state yet?????------is anyone suppling escort parts for those former farmtrac from india?

RNF,

Sorry for the long absence. Although little has been heard from me lately, I haven't given up sniffing the trail--doing some background stuff. Long story there! Hope to have a few days in Aug to scratch around a bit.

Matter of fact, the time is nearing when I will be in your neighborhood. We will join forces with Taxpayer and...bad guys will have much to fear.

Like Superfriends? I'll spare the tights but re-double the skills and surly attitude.

Best,
--b

 

[Chiggerville Farm]

I have a friend with a 555dtc that has this problem........said he thought the brakes dropped and is blocking oil flow.......pics and any help with be appreciated.......are seals needed for repair and if they are where can we get them?
Thanks for any help.......tractor only has 47 hours!!

Resurrecting this thread! It looks like our rear axle brake camshaft boots are leaking (and they are leaking a stream) from age and weather. We don't think that we had an overpressure problem. The boots have cracks along each of the folds that were created by the motion of applying the brakes. We've gotten new boots from our tractor dealer. Our dealer could fix this but we don't have a trailer to transport the trotor to them. I'm not sure that we are up to doing what longtrman said with the hole drilling to keep the hydraulic fluid level lower. Does anyone have a shop repair manual for this tractor from which they can scan in the pages for how to replace these boots and the specs on torques, special alignments, etc.? We found a manual online for a mere $1,000 (actually $999) but we do not have a mere $1,000 laying around to shell out..........