Everything Attachments

[roadhunter]

Any Coupon codes coming up in the near future? Looking at a FFC 240SD Box Scraper vs Bison BB210

 

[EverythingAttachments]

Any Coupon codes coming up in the near future? Looking at a FFC 240SD Box Scraper vs Bison BB210

Not that i'm aware of.

The only current promotions are:
20% off snow chains at TractorSnowChains.com
$50 off when you order a 3rd function kit and a hydraulic attachment(grapple/4in1 bucket/etc) at the same time
$50 off when you order a loader quick attach adapter and a QA attachment(forks/bucket/etc) at the same time.
Travis

 

[roadhunter]

Not that i'm aware of.

The only current promotions are:
20% off snow chains at TractorSnowChains.com
$50 off when you order a 3rd function kit and a hydraulic attachment(grapple/4in1 bucket/etc) at the same time
$50 off when you order a loader quick attach adapter and a QA attachment(forks/bucket/etc) at the same time.
Travis

Well Shucks. I can get the Bison quite a bit cheaper. Thanks anyway.

 

[roadhunter]

Not that i'm aware of.

The only current promotions are:
20% off snow chains at TractorSnowChains.com
$50 off when you order a 3rd function kit and a hydraulic attachment(grapple/4in1 bucket/etc) at the same time
$50 off when you order a loader quick attach adapter and a QA attachment(forks/bucket/etc) at the same time.
Travis

Well Shucks. I can get the Bison quite a bit cheaper. Thanks anyway.

 

[EverythingAttachments]

Well Shucks. I can get the Bison quite a bit cheaper. Thanks anyway.

If you're talking about the Bison 210, it weighs 1000 pounds according to the brochure.
The FFC 240SD weighs 1565 pounds according to the brochure.

That's 56.5% more steel in the FFC, which is HUGE.
Travis

 

[Xfaxman]

Well Shucks. I can get the Bison quite a bit cheaper. Thanks anyway.

In my experience long term, cheaper isn't better.

 

[roadhunter]

If you're talking about the Bison 210, it weighs 1000 pounds according to the brochure.
The FFC 240SD weighs 1565 pounds according to the brochure.

That's 56.5% more steel in the FFC, which is HUGE.
Travis

The brochure I have shows 1,400 pounds. I'm going to confirm this to make sure we are comparing similar models. It looks like the brochure in your link is from 2003.

At $3,895 the Cost is over 25% higher than the Bison and your model has has just over 10% more steel.
2.48 per pound for your model
2.21 per pound for the Bison

 

[roadhunter]

In my experience long term, cheaper isn't better.

I agree for most things but box blades are all fairly similar. The Gannon was even more expensive than the FFC and I'd rather have the FFC honestly as it looks just as well built if not better.

 

[EverythingAttachments]

I agree for most things but box blades are all fairly similar. The Gannon was even more expensive than the FFC and I'd rather have the FFC honestly as it looks just as well built if not better.

I understand what you're saying. If the difference is 200 pounds, that isn't huge.
FFC is owned by Paladin, which is the parent company of Bradco, Harley(power rakes), McMillen(augers) and Sweepster.
They are known for top quality construction grade attachments, and the premium products also have premium prices.

FFC makes the OEM box blades that come with New Holland and Case Construction skip loaders. They have for years.
We are one of, if not the, largest Paladin dealer in the US.
List price for the 240SD box scraper is $4,409. We sell it for $3,895 shipped to a staffed commercial business or freight terminal within the continental US.
Travis

 

[EverythingAttachments]

Do you know who makes the Bison blades or where the facility is located?
I can find distributors, but can't locate the manufacturer page.
Travis

 

[EverythingAttachments]

Do you know who makes the Bison blades or where the facility is located?
I can find distributors, but can't locate the manufacturer page.
Travis

Found it:
Bison
Carretera a Paso Blanco Km.2 #400
Col. Vista Hermosa C.P. 20905
Jesús María, Aguascalientes, México

 

[Mikejeakins]

Are you guys going to be at the GIE-Expo in Loisville Kentucky this year?

 

[grower]

I bought a er074 Terra Force tiller attachment from Everythingattachments.com. I dealt with Rick and Travis. Both of them were nice and helpful when sizing my attachment need. Bought it on a Monday or Tuesday and received from Fedex on Friday. The generic video tutorial on their youtube channel was very important because the manual that comes with the attachment is terrible. The diagrams are actually backwards in some instances. Make sure you are prepared to cut the pto shaft. Guarantee it will be too long. I attached a picture of the soil after 2 runs with the er074 Terra Force Tiller

 

[EverythingAttachments]

Are you guys going to be at the GIE-Expo in Loisville Kentucky this year?

No, we aren't planning on attending any shows in the near future.
Thanks for asking.
Travis

 

[EverythingAttachments]

I bought a er074 Terra Force tiller attachment from Everythingattachments.com. I dealt with Rick and Travis. Both of them were nice and helpful when sizing my attachment need. Bought it on a Monday or Tuesday and received from Fedex on Friday. The generic video tutorial on their youtube channel was very important because the manual that comes with the attachment is terrible. The diagrams are actually backwards in some instances. Make sure you are prepared to cut the pto shaft. Guarantee it will be too long. I attached a picture of the soil after 2 runs with the er074 Terra Force Tiller

Thanks for the business.
Posting pics on here can be tricky, but i'll be glad to share it if you email it to travis@everythingattachments.com

 

[OrangeAgain]

What's the status of your Land Shark line? Will you have Land Shark pallet forks? when?

 

[EverythingAttachments]

What's the status of your Land Shark line? Will you have Land Shark pallet forks? when?

It's still in the developmental stage and TBN will be the first to know when info is available.
We will not have Land Shark pallet forks.
Travis

 

[corl]

What will the land shark line include?

 

[roadhunter]

I bought a er074 Terra Force tiller attachment from Everythingattachments.com. I dealt with Rick and Travis. Both of them were nice and helpful when sizing my attachment need. Bought it on a Monday or Tuesday and received from Fedex on Friday. The generic video tutorial on their youtube channel was very important because the manual that comes with the attachment is terrible. The diagrams are actually backwards in some instances. Make sure you are prepared to cut the pto shaft. Guarantee it will be too long. I attached a picture of the soil after 2 runs with the er074 Terra Force Tiller

Sometimes foreign operation manuals can leave a lot to be desired. Was this American made?

 

[roadhunter]

I bought a er074 Terra Force tiller attachment from Everythingattachments.com. I dealt with Rick and Travis. Both of them were nice and helpful when sizing my attachment need. Bought it on a Monday or Tuesday and received from Fedex on Friday. The generic video tutorial on their youtube channel was very important because the manual that comes with the attachment is terrible. The diagrams are actually backwards in some instances. Make sure you are prepared to cut the pto shaft. Guarantee it will be too long. I attached a picture of the soil after 2 runs with the er074 Terra Force Tiller

Sometimes foreign operation manuals can leave a lot to be desired. Was this American made?