Everything Attachments Rotary Cutter....FIRST LOOK!!!

[EverythingAttachments]

Looks really good, Ted! I have one comment... is there a lip at the top of the deck all the way around the back (curved) part of it? If so, will that hold water when it rains?? I say that because a rusted deck is one thing you see on a lot of old mowers that have sat outside for many years. Is there a weep hole somewhere for the water to drain out? Or maybe a gap in that lip for it run out?

Also, you gonna put the little plastic containers on them for the instruction manual? Some folks like to keep extra shear bolts and spare lynch pins them.

Overall, a great looking, well made piece of equipment that will probably outlast a lot of us forum memers LOL.

Thanks for the comments!
We do intend to put weep holes in the deck to keep water from standing. I do not think it will have a tube, but i'll ask Ted about it.
Travis

 

[EverythingAttachments]

One thing I wish SOMEONE would do is to get rid of the crappy, frustrating plastic shroud at the gear box that covers the slip clutch or shear pin. And replace it with a metal shield that is easily removable and replaceable for servicing the slip clutch.

I understand that those plastic shields can be a pain, but it is a necessary safety feature. The problem with a metal shield is that it would be more expensive to replace if something hits/bends it.
That is the #1 reason that mfgs. use an inexpensive, easily replaced plastic shield.
Travis

 

[Poopdeck Pappy]

I understand that those plastic shields can be a pain, but it is a necessary safety feature. The problem with a metal shield is that it would be more expensive to replace if something hits/bends it.
That is the #1 reason that mfgs. use an inexpensive, easily replaced plastic shield.
Travis

Manufacturers used to use a metal shield. I'm sure they all changed to plastic due to cost. I just wish a metal shield was an aftermarket option since I don't have a shop or metal working tools yet. As soon as I get the tools, I'm gonna make my own and will happily throw that plastic piece of garbage in the burn pile.

 

[EverythingAttachments]

Here is a video outlining some of the features of our new 60" Rotary Cutter. Nate should have the product page on our website soon with more info/pricing. I'll keep you posted.
Travis

 

[newbury]

Here is a video outlining some of the features of our new 60" Rotary Cutter. Nate should have the product page on our website soon with more info/pricing. I'll keep you posted.
Travis

Who does the CC for the video? Goggle tranlte?

I was trying to look at it while SWMBO was watching TV and so not to disturb I turned on the closed captioning. That's a hoot.

 

[EverythingAttachments]

Yes, Nate says Google voice recognition is responsible for the humorous captioning! I don't guess it understands my southern accent. :laughing:
Travis

 

[EverythingAttachments]

We are taking orders for our 72" Rotary Cutter now. It will have the same features/gearbox as our ETA 60" cutter and spec out extremely close to a Land Pride RCR1872.

The introductory price for the 72" model will be $1,995 shipped to a staffed commercial business or supporting freight terminal within 1,000 miles of Newton, NC.

Here is the latest video(complete with a demonstration) of our 60" cutter.
Travis

 

[EverythingAttachments]

I just snapped these of our new ETA 72" Rotary Cutter.
Travis

 

[FTG-05]

I just snapped these of our new ETA 72" Rotary Cutter.
Travis

I don't see any pics although they show up in the quoted text as I'm writing this.

 

[EverythingAttachments]

I don't see any pics although they show up in the quoted text as I'm writing this.

I think i fixed the pics now.