Drawbar pull capability

   / Drawbar pull capability #1  

Atypical_decorum

Silver Member
Joined
Aug 22, 2021
Messages
225
Location
NYC
Tractor
Ultra-Wide B7500 & looking for a 100hp
Has anyone hooked up a pull gauge to their drawbar to find out the actual pull?


A TBN owned pull scale sent out to trusted people and tested in a standardized way would make a pretty neat spreadsheet on here for future generations.
 
   / Drawbar pull capability #2  
Has anyone hooked up a pull gauge to their drawbar to find out the actual pull?


A TBN owned pull scale sent out to trusted people and tested in a standardized way would make a pretty neat spreadsheet on here for future generations.
IMO, probably the most important measure of power.
 
   / Drawbar pull capability #3  
   / Drawbar pull capability #4  
I always compare drawbar power when making tractor buying decisions.
 
   / Drawbar pull capability #6  
Has anyone hooked up a pull gauge to their drawbar to find out the actual pull?


A TBN owned pull scale sent out to trusted people and tested in a standardized way would make a pretty neat spreadsheet on here for future generations.
Hard to standardize the dirt in different places. But if the same model tractor was tested in many places and soil types, that would be really good information.

Bruce
 
   / Drawbar pull capability #7  
Farm tractors, too. Here’s my Magnum.

1697852283901.jpeg



Another good measure of power is in the “tests” section of Tractor Data is “Max Pull”.
 
   / Drawbar pull capability
  • Thread Starter
#9  
Hard to standardize the dirt in different places. But if the same model tractor was tested in many places and soil types, that would be really good information.

Bruce
Agreed to both points. A description of dirt could accompany each measurement.
 
   / Drawbar pull capability #10  
What is it you are looking to pull?

Pulling a plow at 1 mph is different than wanting to pull the same plow at 10 mph.
 
 
Top