Disc

[dinoedwards]

3 point disc, got in a deal, how much are these worth?
3 disc of 4 one set missing, weighs a ton.

 

[scootr]

Scrap iron price.
When replacing the missing discs be sure to measure the diameter of the existing disc to match.
Typically these need a lot of added weight to dig in and require some hp to pull.
I have a set of Towner discs. 50-70 yrs old with steel transport wheels. I added a 55 gal barrel of water to make it dig in.
I gave $400 for it in working condition. Then I replaced the hand crank with a cylinder to raise and lower the wheels.

 

[dinoedwards]

Thx, asking 250 since I'll never use it

 

[TerryR]

Scrap iron price.
When replacing the missing discs be sure to measure the diameter of the existing disc to match.

It's not a few discs missing, but one whole gang. Needs the frame, bearings, axels, and all. It's unusable as is, seems to me.

I'd say scrap iron price for sure.

 

[jyoutz]

Scrap iron price.
When replacing the missing discs be sure to measure the diameter of the existing disc to match.
Typically these need a lot of added weight to dig in and require some hp to pull.
I have a set of Towner discs. 50-70 yrs old with steel transport wheels. I added a 55 gal barrel of water to make it dig in.
I gave $400 for it in working condition. Then I replaced the hand crank with a cylinder to raise and lower the wheels.

Towner discs are pretty good. We have a huge set that weighs 4000 pounds and we pull it with a small dozer for forestry site preparation.

 

[airbiscuit]

It is usable if you remove the single rear gang. Someone would give $200 to use it for a food plot, and sell that rear gang for whatever you can get for it.

 

[rgr33]

Hate to be a downer, but I sold one just like that, no missing parts, in really good condition, for $350

Took forever to sell, guy that finally bought it, didn’t even have a tractor, thought he could pull it with his utv

 

[airbiscuit]

As compared to this.

 

[scootr]

As compared to this.
View attachment 3258852

I don't know who would pay that for that !? But they deserve what asked for. Maybo OP should cut his in half and double the price?
Anybody who has used a disc knows they do not naturally sink into the ground and produce tilled soil. They need added weight and multiple rows opposed angled cutters to produce of anything in terms of tilling.

 

[masseyrider]

If I needed it for a parts volunteer I'd give you ... $40 Kanuckistan money.
But not before seeing it up close.