disc

  1. moparguy55

    Disc harrow size for 47hp

    Hello all have a 1547 massey hst 47hp 4wd Industrial tires (rears are full) supposedly 36hp st wheels. How wide of a disc can i pull? Or how big of a 3 point disc can i hang?Land has wet spots and a bit of incline in spots. It has left over corn stocks. From what i see a pull disc is better for...
  2. gstrom99

    Cat 1 disc with cat 2 arms?

    I have a cat 1 three point disc that I want to use with my cat 2 tractor. I've tried to attach it, but the cat 2 arms won't pull in far enough to latch to the cat 1 width. I sure don't want to heat/bend my lift arms. Do these style adapters widen the cat 1 attaching point enough to fit the...
  3. josiahgarber

    Athens Model 48 Disc

    I have the opportunity to purchase an Athens Model 48 Disc but had a few questions I was hoping someone could answer. See photos below. Thanks for your help. Would this disc pair well with my Kubota L4701 with loaded ag tires? One of the outside disc blades is broken off. Are these difficult...
  4. O

    Disc

    Hello, I purchased a m6060 few months back. I’m looking for a good 3pt disc in the 6-7ft range. I wouldn’t mind an older disc that needs work. I enjoy messing with stuff. I was wondering what disk to look for. I’ve been trying to find a model 25 Massey but without much luck. I don’t really...
  5. M

    Disc axle nut tightness

    Hi. I recently bought a used CountyLine (Tractor Supply) 7 foot Three point hitch disc. Three of of the disc plates were broken, so I removed the axle nut and jam nut off of two axles, and replaced them. I used my Rigid 18 volt impact gun, to tighten the 1 7/16” nuts on. I don’t have...
  6. prairiegirl

    Setting an offset disc

    Hi, not sure if I am in the right category here, but this is our question: Our new Versatile offset disc last year did a rough job. My son moved the hitch to pull it straighter behind the tractor ; now the result is better but the tractor has to be steered to the side like terrible! We asked a...
  7. A

    Discs... 9.5' 3 point or 10' wheeled?

    so we are looking at replacing the 8' disc we currently have, looking on Craigslist I see for 900-1000 a 9.5' 3 point Massey Ferguson disc and a 10' wheeled tow behind Oliver disc. which would be better? I have never used a wheeled or 3 point disc, I have used a old JD 7' single offset that my...
Top