Diagnostic code reader
- Thread starter Kc8ehd
- Start date
- Views: 65364
Wrong plug on the xr4000 series , a standard J1939 plug won't work ...looks more like a Perkins diagnostic port. There has to be an hand held code reader /reset for these tractors without paying $1500 To $3000 .....any ideals ?
George2615
Super Member
I've been looking for almost 4 years now. Even if a plug is found that fits I doubt an automotive type reader would read the codes. Unfortunately there isn't much demand for a tractor aftermarket code reader or a standardized OBD II port like the automotive industry. The software also seems to be proprietary per each manufacturer.
Minhinda has a standard obd2 , many other have J1939 standards , have read and reset codes on many types of equipment... notice dealer had a hand held for checking codes ...they wouldnt give me any information on it ...have found some in the $600 dollar range that say the will work on new holland boomer .....that's basically an LS , same part number for the ecu...
George2615
Super Member
What ones did you find for $600 range that will work on the boomer? I haven't had any codes but I'd be interested for future reference.
OBD Diagnostics, Inc. - OBD2 All-In-One Scan Tool w/ USB
Thinking the adapter may work with my truck scanner...(not for sure by no means) still researching....
Thinking the adapter may work with my truck scanner...(not for sure by no means) still researching....
George2615
Super Member
I just went out and looked but can't find the data port. Where is yours located?
I pulled both under dash panels and popped the hood but didn't see it.
I have an Autel Maxicheck Pro diag. tool that should be more than capable.
I pulled both under dash panels and popped the hood but didn't see it.
I have an Autel Maxicheck Pro diag. tool that should be more than capable.
