atcNick
Bronze Member
Can this be fixed? Thinking of getting it welded.
Loader Cracked bucket
- Thread starter atcNick
- Start date
- Views: 1550
Vaquero
Silver Member
Yes. That can be welded.
Jchonline
Elite Member
- Joined
- Feb 19, 2018
- Messages
- 3,089
- Location
- Red Feather Lakes, CO
- Tractor
- Kubota L6060, KX040-4, M7060, X1100C, M62(S)
Was someone pulling on stumps with their bucket 
herm0016
Platinum Member
looks like someone quenched the welds so it would cool faster.
grind out and weld. both sides. let it cool slowly.
grind out and weld. both sides. let it cool slowly.
Gary Fowler
Super Star Member
- Joined
- Jun 23, 2008
- Messages
- 11,998
- Location
- Bismarck Arkansas
- Tractor
- 2009 Kubota RTV 900, 2009 Kubota B26 TLB & 2010 model LS P7010
As herm0016 said, grind it out and weld from both sides. Grind about 2/3 of the way thru from one side, weld it up then grind back about 2/3 from the opposite side. This will assure that you get solid weld and get all the crack ground out.
A little preheat to 200F before welding would be advisable. Make sure you grind all the way to the end of the crack.
A little preheat to 200F before welding would be advisable. Make sure you grind all the way to the end of the crack.
JimR
Elite Member
As mentioned above, V it out and weld.
