Cleaning Gearbox

   / Cleaning Gearbox #1  

Hunter4282

New member
Joined
Apr 29, 2018
Messages
11
Tractor
Ford 861
I have an older jd 456 round baler and the oil in the flowed like molasses and looked like Carmel. Obviously water contamination from a bad fill plug gasket. What can I use to clean out the gearbox without harming the seals? I was thinking something like seafoam but am wondering about a better option. Thanks for reading.
 

Attachments

  • 20210906_113953.jpg
    20210906_113953.jpg
    1.6 MB · Views: 98
   / Cleaning Gearbox #2  
My fall back solvent has always been Mineral Spirits (paint thinner) seems to be least harmful of all the solvents out there... Not sure if I would just flush gear box though, would rather disassemble and inspect and allow "solvent" to dry before reassembly and filling with new oil...
 
   / Cleaning Gearbox #3  
Personally I would just fill it up with fresh oil and run it for a bit and do a drain and fill a couple of times till the oil looks clean. Fix the water leak and check oil condition often.
 
   / Cleaning Gearbox #4  
Pour diesel through it. If it has a drain plug. You do not want to buy one, just call and get a price, you'll see. Take good care of the gear box.
 

Tractor & Equipment Auctions

2022 Ligchine Spiderscreed Concrete Screed (A59228)
2022 Ligchine...
TOOTHED BUCKET ATTACHMENT FOR MINI EXCAVATOR (A58214)
TOOTHED BUCKET...
Schuler 125BF Feed Wagon (A59814)
Schuler 125BF Feed...
Honda EM3500S Portable Gasoline Generator (A59228)
Honda EM3500S...
500 BBL FRAC TANK (A58214)
500 BBL FRAC TANK...
Flatbed Truck (A55973)
Flatbed Truck (A55973)
 
Top