LittleBill21
Elite Member
i agree, even pressure relief should be stopping them before allowing them to get to that point
Cheap FEL cylinders keep bending
- Thread starter CoThG
- Start date
- Views: 50015
daman1
Gold Member
Correct
Sawyer Rob
Super Member
I'm not going to argue about the quality of the cyl. rods, they aren't here for me to see in person, but I still say that bucket is on too small/lightly built tractor and I don't care what the brand is.
Those buckets put huge torque on a loader and should be on a larger sized tractor.
SR
Those buckets put huge torque on a loader and should be on a larger sized tractor.
SR
LittleBill21
Elite Member
I will agree with that statement IF he had let go of the control stick and bounced it, if you watch the video to the end, you can see where he lets go of the downforce, why isn't the tractor going into pressure relief. that's my issue.
Aquamoose
Platinum Member
LittleBill21
Elite Member
4570Man
Super Star Member
- Joined
- Apr 7, 2015
- Messages
- 18,464
- Location
- Crossville, TN
- Tractor
- Kubota M59, Kubota L3800, Grasshopper 428D, Topkick dump truck, 3500 dump truck, 10 ton trailer, more lighter trailers.
Buy a CTL and stop treating your tractor like one.
5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 26,997
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
Poop happens...lol
Aquamoose
Platinum Member
I’m surprised.
Aquamoose
Platinum Member
The combination of no triangulation brackets, fully extended cylinders, and large forces acting on the stump digger is a recipe for trouble.
That stump digger certainly looks it’s designed for skid steers.
That stump digger certainly looks it’s designed for skid steers.
