Loader Chain Grab Hooks

   / Chain Grab Hooks #2  
Bolt on hooks are fine.............
 
   / Chain Grab Hooks #5  
Ken's bolt on hooks are fine. I have them on my Quickie FEL on my 3930. The 1/2" diameter grade 8 bolts are a whole lot stronger the the 3/8" chain. The mounting and brackets are well made and tough.
 
   / Chain Grab Hooks #6  
Agree with those above ^^^^^

I like and kind of prefer the weld on idea. BUT if they are welded wrong and / or onto the wrong type or thickness of material or the wrong angle they are a lot weaker than the bolt on idea.
 
   / Chain Grab Hooks #7  
Agree with those above ^^^^^

I like and kind of prefer the weld on idea. BUT if they are welded wrong and / or onto the wrong type or thickness of material or the wrong angle they are a lot weaker than the bolt on idea.

If the material is thin a backing plate should be used in either application.
 
   / Chain Grab Hooks #8  
This is what I did, fabed up from 2x2x1/4 inch angle iron and slots cut for 1/4 or 5/16 chain.... Grade 8 bolts....

Bucket.jpg

Slots-3.jpg

Yes a tad bit of welding on one below...

Eyes-3.jpg

Dale
 

Tractor & Equipment Auctions

BW RVB3405 20,000lbs 5th Wheel Hitch Base (A50322)
BW RVB3405...
HONDA EU2200 INVERTER (A50854)
HONDA EU2200...
2017 Ram 5500 Valve Placer Bucket Truck with Versalift STP36NE - 41FT Working Height, Low Miles (A51039)
2017 Ram 5500...
20 STEEL FLAT SHEETS (A50854)
20 STEEL FLAT...
2012 VOLVO VNL TANDEM AXLE SLEEPER (A51222)
2012 VOLVO VNL...
2002 WACKER RD25 ROLLER (A51222)
2002 WACKER RD25...
 
Top