Loader Chain Grab Hooks

   / Chain Grab Hooks #2  
Bolt on hooks are fine.............
 
   / Chain Grab Hooks #5  
Ken's bolt on hooks are fine. I have them on my Quickie FEL on my 3930. The 1/2" diameter grade 8 bolts are a whole lot stronger the the 3/8" chain. The mounting and brackets are well made and tough.
 
   / Chain Grab Hooks #6  
Agree with those above ^^^^^

I like and kind of prefer the weld on idea. BUT if they are welded wrong and / or onto the wrong type or thickness of material or the wrong angle they are a lot weaker than the bolt on idea.
 
   / Chain Grab Hooks #7  
Agree with those above ^^^^^

I like and kind of prefer the weld on idea. BUT if they are welded wrong and / or onto the wrong type or thickness of material or the wrong angle they are a lot weaker than the bolt on idea.

If the material is thin a backing plate should be used in either application.
 
   / Chain Grab Hooks #8  
This is what I did, fabed up from 2x2x1/4 inch angle iron and slots cut for 1/4 or 5/16 chain.... Grade 8 bolts....

Bucket.jpg

Slots-3.jpg

Yes a tad bit of welding on one below...

Eyes-3.jpg

Dale
 

Tractor & Equipment Auctions

2011 GR TRAILER GOOSENECK (A50854)
2011 GR TRAILER...
30ft Pole S/A Towable Trailer (A49346)
30ft Pole S/A...
2000 Ingersoll Rand P185WJD Towable Diesel Air Compressor (A49461)
2000 Ingersoll...
Quick Attach Skid Steer Quick Claw Grapple Industrial Grapple Rake (A51039)
Quick Attach Skid...
2013 COACHMEN CATALINA TRAVEL TRAILER (A50854)
2013 COACHMEN...
2000 Trail King TK70SA-48.2 T/A 43 Ton Step Deck Trailer (A49461)
2000 Trail King...
 
Top