BX25 trouble......

[JonCbx25guy]

I was using the PTO today and heard a clicking noise.....five minutes later, BAM! This cannot be good......any idea what happened here guys?

 

[Herkypilot]

I don't know, but that may be a trip to the dealer unless you get a shop manual and are good at wrenching...sorry about the broken tractor. What were you doing?

Btw, the moderator should move this thread under Kubota "owning/operating"

 

[JonCbx25guy]

I didn't realize the group at the time......my bad. I did post the same thing on the owner and operating also......

 

[davrow]

Ouch! That looks expensive. Let us know how things work out.

 

[CHDinCT]

Wow. Hope you got the Kubota insurance!

 

[buck boost]

Dunno either, but doesn't look good!:thumbdown:

 

[Navasot]

What were you using on the PTO? Can you back off the picture a bit?

 

[JonCbx25guy]

I was using a Woods tsg 50 stump grinder. Not covered under insurance.....

 

[sd455dan]

I was using a Woods tsg 50 stump grinder. Not covered under insurance.....

I take it there was no slip clutch between the tractor and stump grinder..? OUCH

not trying to be a smart Alec -

but- a good used 50+ hp 2 wheel drive utility tractor will probably be less expensive to get you up and stump grinding again- than the fix for that bx will cost???


that tsg grinder has some easily to be misunderstood specs Product Details

at the top it lists tractor hp range of 50- 100 hp
- under general lists tractor engine power between 15-50 hp

also the notation of being compatible with a cat 2 hitch

It looks like that size of Woods stump grinder is a recipe for the destruction of any bx pto


especially if there is no slip clutch.. jmo

Hopefully the bx can be fixed , without major expense- or you are mechanically inclined and or have a friend that is good at working on these new Kubotas.

Good Luck- and your tractor will be good as new once fixed

but after reading the Woods specs- can't recommend running a tsg 50 on any bx series

 

[buck boost]

I agree, that is an awfully big implement to be running with a BX. I wouldn't even run that with a B series.