BX2200 Bouncing

   / BX2200 Bouncing #1  

okie350

Silver Member
Joined
Mar 7, 2007
Messages
140
Location
Mounds Oklahoma
Tractor
L3010 & BX2200
When going from reverse to forward direction i have noticed my little Bota seems to "bounce" two or three times before levealing out and roaring off. It only seems to do it if I only PARTIALLY push the peddle (like half way push it down) If I push all the way it does not seem to do it. Is this normal, or do I have the beginnigs of problems?
 
   / BX2200 Bouncing #2  
Perhaps "I have no idea what you're talking about" isn't the most helpful answer. Or perhaps that confirms your suspicions.
 
   / BX2200 Bouncing #3  
I'd be wondering about your foot on a partial movement causing that type movement.
 
   / BX2200 Bouncing
  • Thread Starter
#4  
Ok, Hydrostatic transmission, while mowing around objects i frequently have to back up, and then move forward. I seem to get a bouncing in the transmission when I back up and then move forward, especially when i only mash the go peddle partially. If I push it all the way to the floor it takes off like normal (snaps your neck back speed)

Does this explination make more sense now?
 
   / BX2200 Bouncing
  • Thread Starter
#5  
I'd be wondering about your foot on a partial movement causing that type movement.

I have noticed that my foot will agravate the problem. Once I start bouncing my foot will start bouncing on the peddle and make it worse
 
   / BX2200 Bouncing #6  
You will need a good counter weight on your 3pt to balance your load, this will avoid many problems...
 
   / BX2200 Bouncing
  • Thread Starter
#7  
You will need a good counter weight on your 3pt to balance your load, this will avoid many problems...

Im mowing, why would I need a counter weight? there is no loader on this machine, just used as a mower
 
   / BX2200 Bouncing #8  
make sure your tire pressure is correct. Soft tires will contribute to the
bounce. Weight on the 3pt will also help to damp out the bounce.

Bill
 
   / BX2200 Bouncing #9  
Just a shot in the dark, but if the BX2200 has the gas spring shock dampening the fwd/rev pedals like the BX2350, it could be bad
 
   / BX2200 Bouncing
  • Thread Starter
#10  
make sure your tire pressure is correct. Soft tires will contribute to the
bounce. Weight on the 3pt will also help to damp out the bounce.

Bill

I must be describing this incorrectly.It is NOT bouncing like going over bumps or carring a load but "surging" "maybe this is a better description"
 

Tractor & Equipment Auctions

2016 Ford E-350 Econoline Cutaway Service Van (A46683)
2016 Ford E-350...
Wolverine SP-15-84W Skid Steer Snow Blade (A47371)
Wolverine...
BT360 Stand on Skid Steer Loader (A49251)
BT360 Stand on...
2015 Ford F-350 4x4 AutoCrane 4004Eh Crane Service Truck (A46683)
2015 Ford F-350...
New Holland 256 Hay Rake (A49251)
New Holland 256...
2008 Altec DC1419 Towable Brush Chipper (A46683)
2008 Altec DC1419...
 
Top