spo307
Gold Member
built pallet forks
- Thread starter spo307
- Start date
- Views: 11121
Bennet.man
Member
- Joined
- Sep 7, 2008
- Messages
- 47
Looks good! Where did you find your forks?
rockinmywaypa
Platinum Member
- Joined
- Jul 10, 2003
- Messages
- 649
- Tractor
- john deere 3130, universal case 970 and a IH 1086
I think they look pretty darn good, a lot better than I'd expect for a first try. I almost didn't even see them because I didn't scroll sideways at first.
dcyrilc
Super Member
They do look good. Now that I found the scroll bar.
I just wasn't seeing them at first.
I just wasn't seeing them at first.
mcd176
Gold Member
Very nice job! I am impressed for a first timer
I have found that building my own implements and accessories has been very rewarding, you save alot of $$$ and have the satisfaction of doing it yourself!
I have found that building my own implements and accessories has been very rewarding, you save alot of $$$ and have the satisfaction of doing it yourself!
Red Beast
Bronze Member
- Joined
- Jan 17, 2010
- Messages
- 72
- Location
- Sunshine Coast, Australia
- Tractor
- Case JXU 85; Kubota B1550HST
very impressive.
and scroll bars?? come on you guys get a bigger monitor.....lol
and scroll bars?? come on you guys get a bigger monitor.....lol
rockinmywaypa
Platinum Member
- Joined
- Jul 10, 2003
- Messages
- 649
- Tractor
- john deere 3130, universal case 970 and a IH 1086
I have been wanting a 50 inch monitor, maybe it's time,lol.
forks were given to me, i made the everything else, 5 inch c channel is a little over kill but that was free also, all done with torch and a mig, well ran out of wire, had to stick the top cage, next is a cultipacker, and FEL boom, thanks for the replys I dont know how to load photos on top of each other I thought I did..
