bucket position when parking

   / bucket position when parking #1  

seca111

Member
Joined
Jan 13, 2010
Messages
35
Location
colorado
Always when I park outside I leave the bucket level and put it to the ground. I've found now on my Kubuta that if I happen to be parking up hill and it rains it fills with water.
On my JD it had holes in the bottom so this didn't happen.

I've noticed a few people park them with the buckets almost in the full tilted position. I don't know why but I always thought this would put more stress on something because the entire weight of the FEL would be on the edge of the box rather than the entire bottom surface.

Is it okay to park it with them pointed down?
 
   / bucket position when parking #2  
Always when I park outside I leave the bucket level and put it to the ground. I've found now on my Kubuta that if I happen to be parking up hill and it rains it fills with water.
On my JD it had holes in the bottom so this didn't happen.

I've noticed a few people park them with the buckets almost in the full tilted position. I don't know why but I always thought this would put more stress on something because the entire weight of the FEL would be on the edge of the box rather than the entire bottom surface.

Is it okay to park it with them pointed down?
Yes, and actually it's a very good idea if parking on a slope.
 
   / bucket position when parking #3  
When I park outside, I put the bucket in dump on the ground. Once the engine is shut down, I'll jiggle the loader stick. What ever position the bucket is it after that (normally down, but not full dump) is where it stays.
No stress on the loader.
 
   / bucket position when parking #4  
When I park outside, I put the bucket in dump on the ground. Once the engine is shut down, I'll jiggle the loader stick. What ever position the bucket is it after that (normally down, but not full dump) is where it stays.
No stress on the loader.

I do EXACTLY the same thing.
Mike
 
   / bucket position when parking #6  
If I were parking and extending my cylinders, for a long period of time, I would coat the shafts with grease to prevent corrosion. Ken Sweet
 
   / bucket position when parking #7  
I leave mine in full curl; no particular reason. My sons park in dump; no particular reason.
 
   / bucket position when parking #8  
If I were parking and extending my cylinders, for a long period of time, I would coat the shafts with grease to prevent corrosion. Ken Sweet

Ken, is white lithium grease ok for this? Or fluid film?
 
   / bucket position when parking #9  
Ken, is white lithium grease ok for this? Or fluid film?

White lithium grease seems would be fine. Outside storage and exposed to the elements, I would use the grease type Lube and inside, the Fluid Film works very well. Ken Sweet
 
   / bucket position when parking #10  
When the bucket is on grass I park with edge vertical down. A hot bucket, or longterm shade kills grass.
larry
 

Tractor & Equipment Auctions

2002 Genie S-125 4x4 125ft Telescopic Boom Lift (A52377)
2002 Genie S-125...
2011 DOOSAN G25KW GENERATOR (A53843)
2011 DOOSAN G25KW...
HarbinGer V3 Plus 8KW S/A Towable Light Tower (A52377)
HarbinGer V3 Plus...
VERMEER RTX 130 WALK BEHIND TRENCHER (A51242)
VERMEER RTX 130...
JOHN DEERE TS 4X2 GATOR (A51406)
JOHN DEERE TS 4X2...
KENWORTH SERVICE TRUCK (A51406)
KENWORTH SERVICE...
 
Top