Brush Hog mods

[ptsg]

I was in a place today that would have been a good test for it, to see if it could work circles around a skidsteer I posted a couple of pictures in the other thread, good luck and keep us posted.

It would. That right there is the perfect place for these cutters. A simple 75HP tractor and a medium duty cutter would've taken care of it easily.

 

[scootr]

I wonder what grade chain they used in their experiments too.

 

[ArlyA]

No matter the grade, I'd guess the folks running chains are not replacing them when they wear.....

 

[John0829]

Same thing can be said for blades, how many think to inspect blades after encountering something significant or just check them annually for normal wear? Of the people I know who own a rotary cutter, it's hook it up and go, only looking under it if something has tangled up like fence wire.

IMHO blades or chains are both dangerous if maintenance and simple inspections are part of it.

 

[ptsg]

Here is a picture of mine back in 2019. Around 200-ish hours on this set of chain. I run mine very close to the ground, so it tends to dig a lot and wear out faster. I would say 400 to 500 hours per set of chains is a good time frame, but depends on a lot things.

You can see how thin the chain gets on the end that see all the work. You can also see the cracked link I keep talking about. This how these chains wear out. The link gets so thin that eventually it breaks. People will often run them till they get 1 to 2 links shorter before they get a new set, basically reducing the cutting width till it's a bit too much.

I still haven't bought a new set, even though it's less than €30.

 

[LouNY]

Well here is a company with a few Canadian dealers, some very nice looking pieces of equipment;
This first one is my favorite in a quick look,

https://www.youtube.com/@TokvamAS

 

[LouNY]

And another,

 

[charlessenf]

What size of chain did you end up going with? Looks small in that mower. Cables won't work very well because they don't really have much weight at all.

For anyone interested, here is one of these cutters working:

Also, how one of these mowers look underneath and on the top:

View attachment 809784 View attachment 809785

Those little chains 'round the edges are 'new to me' and an interesting feature. I also noticed the lack of a wheel on the back. I'd assumed 'they all had one.' Live and learn. Thanks for sharing the video