Blinker Lights with Brush Guards

[Gee Ray]

I bought a New Holland TC21 from my neighbor. The warning lights set to the outside of the ROPS. They are both broken off. I have been trying to find replacement 2 sided amber lights that have a guard to protect the lights. I have found a few guards but they are simply pipe around the lights. I was hoping to find pipes that are wide enough to cover the lights and have a screen to protect the lens.

Any ideas ?

 

[Midniteoyl]

I just took them off and threw them in the trash.

 

[nybirdman]

Move them to the inside of the ROPS.I replaced on our small tractor with Tractor Supply replacements,couple of rectangular U bolts.

 

[tacticalturnip]

Are these generic round amber lights, or are they shaped?

My Kioti uses round ones, and I found guards from small business that fit them. They were advertised for Kubota, but they helped me with the right size.

Other Tractor Manufacturers.

Other Tractor Manufacturers.

www.specialtyrepairscustommods.com

 

[WranglerX]

Moved my lights on my MF GC series to inside of ROPS.... No more broken lights.... Found out my lights were expensive ($125 each) the hard way....

Think if I ever break them again I will go with aftermarket automotive/truck lights....

 

[bigtiller]

I bought a New Holland TC21 from my neighbor. The warning lights set to the outside of the ROPS. They are both broken off. I have been trying to find replacement 2 sided amber lights that have a guard to protect the lights. I have found a few guards but they are simply pipe around the lights. I was hoping to find pipes that are wide enough to cover the lights and have a screen to protect the lens.

Any ideas ?

Check with New Holland, your hazard lights may have a properly sized guard as a bolt-on dealer option.

 

[oosik]

Blinker lights. Two things affect my blinker lights. My Buck brush only grows two feet high at a max. Can't get to the blinker lights.

And - my tractor never leaves my 80 acres. So who cares about the blinker lights.

 

[Smokeydog]

Used some stainless tubing from scrap yard to make guards. Grape vines some of the worst to strip off lights. Haven’t lost a light since. Could easily attach some expanded metal for more protection. Tractor supply cheapest place to source replacements.

 

[tacticalturnip]

View attachment 1411559View attachment 1411582Used some stainless tubing from scrap yard to make guards. Grape vines some of the worst to strip off lights. Haven’t lost a light since. Could easily attach some expanded metal for more protection. Tractor supply cheapest place to source replacements.

Very nice job!

 

[jmc]

Once the lights are guarded, the next weak link is their wires, exposed under the fender.