Blinker Lights with Brush Guards

   / Blinker Lights with Brush Guards #1  

Gee Ray

Platinum Member
Joined
Nov 30, 2019
Messages
557
Tractor
Bota L2501, NH TL80A
I bought a New Holland TC21 from my neighbor. The warning lights set to the outside of the ROPS. They are both broken off. I have been trying to find replacement 2 sided amber lights that have a guard to protect the lights. I have found a few guards but they are simply pipe around the lights. I was hoping to find pipes that are wide enough to cover the lights and have a screen to protect the lens.

Any ideas ?
 
   / Blinker Lights with Brush Guards #2  
I just took them off and threw them in the trash.
 
   / Blinker Lights with Brush Guards #4  
Are these generic round amber lights, or are they shaped?

My Kioti uses round ones, and I found guards from small business that fit them. They were advertised for Kubota, but they helped me with the right size.

 
   / Blinker Lights with Brush Guards #5  
Moved my lights on my MF GC series to inside of ROPS.... No more broken lights.... Found out my lights were expensive ($125 each) the hard way....

Think if I ever break them again I will go with aftermarket automotive/truck lights....

dsc01777-jpg.615143
 
Last edited:
   / Blinker Lights with Brush Guards #6  
I bought a New Holland TC21 from my neighbor. The warning lights set to the outside of the ROPS. They are both broken off. I have been trying to find replacement 2 sided amber lights that have a guard to protect the lights. I have found a few guards but they are simply pipe around the lights. I was hoping to find pipes that are wide enough to cover the lights and have a screen to protect the lens.

Any ideas ?
Check with New Holland, your hazard lights may have a properly sized guard as a bolt-on dealer option.
 
   / Blinker Lights with Brush Guards #7  
Blinker lights. Two things affect my blinker lights. My Buck brush only grows two feet high at a max. Can't get to the blinker lights.

And - my tractor never leaves my 80 acres. So who cares about the blinker lights.
 
   / Blinker Lights with Brush Guards #8  
IMG_1888.jpeg
IMG_1877.jpeg
Used some stainless tubing from scrap yard to make guards. Grape vines some of the worst to strip off lights. Haven’t lost a light since. Could easily attach some expanded metal for more protection. Tractor supply cheapest place to source replacements.
 
   / Blinker Lights with Brush Guards #9  
   / Blinker Lights with Brush Guards #10  
Once the lights are guarded, the next weak link is their wires, exposed under the fender.
 

Tractor & Equipment Auctions

Adams 8 Ton Weigh Hopper (A50397)
Adams 8 Ton Weigh...
2017 Dodge Ram 4500 4x4 Crew Cab Reading Service Truck (A48081)
2017 Dodge Ram...
2006 Xpress 27ft. Gooseneck T/A Horse Trailer (A48082)
2006 Xpress 27ft...
2014 Infiniti QX60 AWD SUV (A48082)
2014 Infiniti QX60...
2025 AllMetal K0720 UNUSED 20 ft. Bi-Parting Metal (A50860)
2025 AllMetal...
2022 ONYX RX34 FLOOR SWEEPER (A50458)
2022 ONYX RX34...
 
Top