Beekeeping

   / Beekeeping #761  
Thanks!

That's impressive precision, and dare I say it, accuracy. I can see how a precise, solid jig would make a big difference. For me, not being a great woodworker, getting wood boxes perfect always seemed like a five handed challenge until I built myself a set of corner jigs to enforce truly square joints. (From some back issue of Fine Woodworking, IIRC. Transformational.)

All the best,

Peter
 
Last edited:
   / Beekeeping #762  
Thanks!

That's impressive precision, and dare I say it, accuracy. I can see how a precise, solid jig would make a big difference. For me, not being a great woodworking, getting wood boxes perfect always seems like a five handed challenge until I built myself a set of corner jigs to enforce truly square joints. (From some back issue of Fine Woodworking, IIRC. Transformational.)

All the best,

Peter

I'm a little obsessive in most things I do. So I try to improve the process each and every time. It's a challenge when working with pine and flexible and warpable plywood.
 
   / Beekeeping #763  
One more to insulate, but I have my student coming over tomorrow to see how it's done. This is the fastest I've ever built hives.
IMG20251102204405.jpg
 
Last edited:
   / Beekeeping #765  
Bottling day!

We will have this sold quickly. This years honey is the lightest and most floral we have ever harvested. Last year it was very dark and earthy. Wild to see the differences.

I'm not in the photos, as I had my three mentees and wife doing most of the work. I grilled their lunch though 🤣

IMG20251108125138~2.jpg
IMG_20251108_181550.jpg
 
   / Beekeeping #768  
How do you go about processing your wax?

Generally 1 or two steps. Depends on the quality of the wax going into the first step.

First melt is with water. It is made into a melted wax/water combination. This is filtered through a screen or cheese cloth and allowed to cool. The wax floats.

I remove the wax, and if it was sent through cheesecloth, it's done. If it was filtered through a screen due to larger debris like cacoons, then I melt it again in a double boiler and send it through cheesecloth and let it cool.
 
   / Beekeeping #769  
I also typically store it in 35g ingots so that I can toss them into the melt for lip balm, without measuring.
IMG20251109164556.jpg
 
Last edited:
   / Beekeeping #770  
A friend of mine reported harvesting 380 pounds from 9 hives this year.

He also fed a couple hundred pounds of sugar to them.

So... You tell me... Is he selling honey? Or?
 
   / Beekeeping #771  
You don't seem to do anything without a reason...

So why process on the trailer? Is it so it can be cleaned up outside of your shop?
 
   / Beekeeping #772  
You don't seem to do anything without a reason...

So why process on the trailer? Is it so it can be cleaned up outside of your shop?

#1 the extractor needs to be anchored to something.

#2 the trailer jack allows me to tilt it rearward to facilitate flow out the valve.

#3 the height is perfect to run it from extractor to strainer bucket to bottle

#4 easy to move to my other shop to pressure wash after use.
 
   / Beekeeping #780  
I have however done two things I didn't want/intend to do: feed syrup (since mid-july) and treat for mites. Felt the feeding was necessary to get them to build out enough frames to store enough food for winter, and rationalized treating for mites to give them a clean/fresh start since I don't know what condition they were in when I got the nuc.
Ensuring the animals under your care are adequately fed and healthy is good animal husbandry.
 

Tractor & Equipment Auctions

2009 Ford F-550 4x4 Ext. Cab Brush Fire Truck (A59230)
2009 Ford F-550...
2017 FORD F-550 SERVICE TRUCK (A58214)
2017 FORD F-550...
2016 Freightliner Bucket Truck with Altec LR756 (A56438)
2016 Freightliner...
2015 Toro Z Master 6000 Series 60in Zero Turn Commercial Mower (A59228)
2015 Toro Z Master...
2015 FORD F-150 LARIAT CREW CAB TRUCK (A59823)
2015 FORD F-150...
2018 Chevy Silverado 1500 4X4 (A56438)
2018 Chevy...
 
Top