Backhoe rake is fiinished

   / Backhoe rake is fiinished #1  

old cheddar

New member
Joined
Jul 5, 2016
Messages
8
Location
Prescott Ontario
Tractor
kubota l2800
IMG_1143.JPGIMG_1146 (Medium).JPGIMG_1147 (Medium).JPG
I got my backhoe rake finished. Just in time to not be able to use it this year. Got a chance to try it out though and it works better than expected. It rips through roots and pulls small stumps easily. Pictures aren't the best but gets the point across. I origionally had planned 5 tines but it was pointed out that it would be too wide and could bend pins, so I reduce to 4 tines and spaced them slightly closer together, leaving the pipe overhanging a bit. Its roughly 24 " wide now.

I got the parts waterjetted and the flanges welded and reamed by a company in Trenton Ontario, if anyone wants the info on them I can supply it. They were real easy to deal with and reasonably priced. All I had to do was supply them with a cad drawing.

Next project underway already is a tractor cab, then to motorize the chute rotater on the snowblower. Next year to build a screener to get the soil separated from the roots.
 
Last edited:
   / Backhoe rake is fiinished #2  
Looks good, never thought about a back hoe rake.
 
   / Backhoe rake is fiinished
  • Thread Starter
#3  
I tried ripping the roots with a rear mounted ripper but that just rutted up the land. Additionally, I have a lot of tight spaces to maneuver so the rake is much more nimble. The roots are unbelievable. Above ground is just a few junky looking bushes, below ground, I have an underground forest.
 
   / Backhoe rake is fiinished #4  
It turned out great!
How did this end up working out for you? Did you add a thumb with it?
 
Last edited:
   / Backhoe rake is fiinished #5  
Man, very nice, I love this! Old Cheddar, this thread needs an update.
 
   / Backhoe rake is fiinished #6  
The OP hasn't posted since 2016.
 
   / Backhoe rake is fiinished #7  
Well he may just read w/o posting nowadays, who knows. Either way the dude deserves props, this thing is sweet.
 
   / Backhoe rake is fiinished #8  
Well he may just read w/o posting nowadays, who knows. Either way the dude deserves props, this thing is sweet.

Usually a TBN "member" that tops out with just a few posts was either someone that got his answer and then left, or a shill that makes a couple of benign posts to fit in and then gets to work on his agenda. Not old cheddar. Hope he comes back.
 
   / Backhoe rake is fiinished #10  
that tool would serve him well in middle earth for sure!
 

Tractor & Equipment Auctions

2013 Dodge Charger Passenger Car, VIN # 2C3CDXAT8DH646721 (A51572)
2013 Dodge Charger...
1997 Freightliner FL60 Truck, VIN # 1FV3GJBC6VH725847 (A51572)
1997 Freightliner...
2021 Club Car Carryall 500 Utility Cart (A51691)
2021 Club Car...
2000 Thomas Built Saf-T-Liner MVP-ER Transit Passenger Bus (A51692)
2000 Thomas Built...
2017 Rogator RG1300B Dry Fertilizer Applicator (A52748)
2017 Rogator...
2007 INTERNATIONAL PAYSTAR 5600I (A52472)
2007 INTERNATIONAL...
 
Top