backhoe joystick

[welderboy14]

hi

i'am trying to find the best joysticks for operating a backhoe. the ones i was

going to use are no longer available now heres a link to them it is just picther now (it was only the joystick on the end of the block)

Item# 314356 Sold Out | Northern Tool + Equipment
but thay did cost $89.99

i hope someone knows of a place

i was hoping only to spend max $200 on each joystick

note i live in B.C canada

thanks very much

welderboy14

p.s i know i should of posted this in the hydraulics fourm but it would not let me post for some reson i will post it in the hydraulic fourm when it works

 

[kennyd]

I found two:

Surplus Center (although it's the wrong picture)

Baileynet

 

[welderboy14]

thanks for the links

i think i have found the ones i am going get Directional Control Valves 220-905 Detailed Information
for this jostick should i still get the closed center plug?

thanks
welderboy14

 

[kennyd]

So you are not going to have outriggers?

You want it to be Open Center, and possibly with the Power Beyond depending on how you are going to power/plumb it.

 

[welderboy14]

So you are not going to have outriggers?

You want it to be Open Center, and possibly with the Power Beyond depending on how you are going to power/plumb it.

ok thanks

and the outriggers are going to be manual so i can cut down the cost

 

[J_J]

thanks for the links

i think i have found the ones i am going get Directional Control Valves 220-905 Detailed Information
for this jostick should i still get the closed center plug?

thanks
welderboy14

No you don't need the closed center plug. You will need one PB sleeve/fitting. The output from the PB port will go the input of the second valve, and both valves have to return to tank.

If you have 5 cyl, you will need 5 spools. Unless you combine the out riggers into one spool.

 

[welderboy14]

No you don't need the closed center plug. You will need one PB sleeve/fitting. The output from the PB port will go the input of the second valve, and both valves have to return to tank.

If you have 5 cyl, you will need 5 spools. Unless you combine the out riggers into one spool.

their is going to be no hydraulic outriggers

 

[BHD]

I used the stacked small prince valves and added there joy stick option, I had 6 valves two for out riggers and put them in the middle and single handles on them and joy sticks on the out side, (I think surplus center has them),

I think you can see them in this picture, this was one of the first test hook up I had done with the back hoe,

 

[BHD]

https://www.surpluscenter.com/item.asp?UID=2009080409374552&item=9-7502&catname=hydraulic
PDF of the catalog page,
https://www.surpluscenter.com/pages/014.pdf

another place I have had good service from,

Hydraulicstore.com - Call toll-free 877-778-3533 Mon-Fri 7:30-5:00 Sat 7:30-12:00 Central Time ___________

prince page on the stacked valves, Hydraulic Directional Stack Valves

 

[welderboy14]

well i have orderd the joysticks i am going to use Standard Hydraulic Cylinders product number 220-905

welderboy14