4707
- Thread starter SteelMastiff
- Start date
- Views: 423067
EddieWalker
Epic Contributor
Glad I locked mine in 2 months ago with 0% for 84 months!!!
Pooroldexcavator
Member
- Joined
- Jun 6, 2021
- Messages
- 31
- Tractor
- IHI 35J Excavator
How many have re tuned their 07’s? Wondering if it works well. I’m in hay work and sometimes need a little extra pto hp.
Boss 302
Platinum Member
- Joined
- Aug 25, 2013
- Messages
- 875
- Location
- Va.
- Tractor
- Kioti RX6010PS Mahindra 3510 Sold (Gonna miss that ole girl)
There has been a lot of threads about adjusting pumps and tuning ecm's to get more HP recently. I not familiar with anyone who is programming for the ag industry.
Pooroldexcavator
Member
- Joined
- Jun 6, 2021
- Messages
- 31
- Tractor
- IHI 35J Excavator
Just checked with my dealer. Mf tracks everything done to the computer. If I have a problem and they remote connect to it and see a tune you lose all warranties.
daugen
Epic Contributor
but one day out of warranty to go from 70hp to 100hp for a couple grand, if you can use the pto power, seems like a good deal.
My understanding is it's the same engine just turned up and if the factory has a 100hp setting, why not use it?
Conversely why waste fuel on more hp if you don't need it. I doubt more hp would affect hydraulics at all. I had 34 radials on the back of mine and they
looked like they could take a lot more power.
I never did but I'm old enough to always wish for 20 more hp and 20 less pounds on me....
My understanding is it's the same engine just turned up and if the factory has a 100hp setting, why not use it?
Conversely why waste fuel on more hp if you don't need it. I doubt more hp would affect hydraulics at all. I had 34 radials on the back of mine and they
looked like they could take a lot more power.
I never did but I'm old enough to always wish for 20 more hp and 20 less pounds on me....
I just purchased a 2022 MF 4707 Deluxe w/ cab and Dyna 2 trans with the FL 3615 loader. I have to say upgrading from 1635 to this is amazing.
I have one question though, I had the dealer install the engine block heater, but i can't seem to find where to plug it in at. The dealer told me its behind the loader support on the left-hand side, but i can't find it.
Also purchased a led light bar, replaced all lighting on the tractor with LEDs, an HLA snow pusher, and a hydraulic top link. AGCO acquired Sparex, so if you want accessories for your MF go there.
I converted my CAT 1 Quick attach hitch to mount on the CAT 2 Quick attach hitch.
I have one question though, I had the dealer install the engine block heater, but i can't seem to find where to plug it in at. The dealer told me its behind the loader support on the left-hand side, but i can't find it.
Also purchased a led light bar, replaced all lighting on the tractor with LEDs, an HLA snow pusher, and a hydraulic top link. AGCO acquired Sparex, so if you want accessories for your MF go there.
I converted my CAT 1 Quick attach hitch to mount on the CAT 2 Quick attach hitch.
daugen
Epic Contributor
very nice looking tractor, good luck with it and stay warm
