3725 rear remote with float option

[MrWinkey]

Does anyone know if you can get a rear remote with the float option? I would like that for my rough cut mower.

 

[Asteral]

TA00058975A this is the part number for the 4 port assembly with a detent option for the rear remotes.

 

[K5lwq]

Detent is not Float. I added float to both of my remotes utilizing one way electric over hydraulic valves.

 

[Asteral]

your absolutely correct K% i completely misread that this morning.

 

[K5lwq]

No problem Asteral I figured you misunderstood. :thumbsup:

 

[MrWinkey]

Detent is not Float. I added float to both of my remotes utilizing one way electric over hydraulic valves.

View attachment 660575

Might I ask for the info and part numbers on how you did that? Mowing without the top link in float is a real pain.

 

[K5lwq]

I don't know the part numbers because I just went to my local hydraulic supply place. I got two normally closed valves with two ports on them and two continuous duty coils. I used the trailer connection bracket because I won't ever need to plug in a trailer. I drilled 2 1/4" holes and used 1/4"-20 all thread to make bolts. I cut 4 11ga steel straps 1"x2" and put one on each side of both valves.

I ran a wire from the spare fuse slot in my fuse panel back to two switches I mounted in the cab. Then 2 wires from the switches back to the coils. I tied the two coils together with a ground wire and then took the ground to one of the bolts I made.

I installed tees on my remote disconnects and used 1/4" hose to tie the two ports for each spool together. In my case, I needed 2-15 and 2-17" hoses to clear the TPH.

When I want float, I flip the switch. Just remember not to engage your remotes with the float engaged. Hope that helps. :thumbsup:

 

[Asteral]

fantastic job on the float K5, just so you know we may steal your idea here at the shop i've forwarded a link to this page to the Boss to see what he thinks.

 

[K5lwq]

fantastic job on the float K5, just so you know we may steal your idea here at the shop i've forwarded a link to this page to the Boss to see what he thinks.

No problem you are welcome to copy. Plus you have my number if you have more questions. I could use some of the interior panel retainers if you can order some for stock. I had a couple they damaged during assembly and made it difficult to reuse them.

Also you should see it in person in a couple of weeks. Getting close to time for my 50 hour service and I want your guys to do it for me.

 

[Asteral]

we'd be more than happy to do it, can you send me picture of the retainers your needing i'll add some to our next order.
Ryan@bigtextractor.com