2007 CK20 HST Glow Plugs

[Mike O]

The ranch I bought this past summer came with a 2007 CK20 HST; it ran fine during the warm weather. But as the overnight temp drops, starting has become problematic. I pulled the fwd glow plug and it has 124 ohms of resistant. I guess I will need to replace all of them; can the middle plug be removed without pulling the manifold? Thanks.

 

[Ranchofla]

The ranch I bought this past summer came with a 2007 CK20 HST; it ran fine during the warm weather. But as the overnight temp drops, starting has become problematic. I pulled the fwd glow plug and it has 124 ohms of resistant. I guess I will need to replace all of them; can the middle plug be removed without pulling the manifold? Thanks.

I have not looked at mine to see if there is room or not.

Rancho
CK20 HST

 

[Deere Dude]

I don't know if yours has a Yanmar engine, but on my Yanmar I had to pull the intake manifold which was easy, or there was no way to change glowplugs. I got replacements at NAPA for about $10 each and was a super easy job, after the manifold was off.

 

[Mike O]

Tnx; I figured as much. Did you re-use the manifold gasket or did you replace it as well?

 

[ritcheyvs]

When I pulled the intake manifold on my 2006 DK, the gasket broke in several spots. As a minimum, I'd have a spare on hand before starting.

 

[kanadacat]

You don't happen to remember the glow plug part number that you bought?

 

[all4glh]

The only ones I found outside of the dealer were at tractor Joes.

E576-65511 - Glow Plug for Kioti | Up to 6% off Dealer Prices | TractorJoe.com

 

[Mike O]

You don't happen to remember the glow plug part number that you bought?

The auto parts equivalent NGK 5392 Y-720U1

 

[Ranchofla]

The auto parts equivalent NGK 5392 Y-720U1

THANKS!!!

Rancho