kubota bx2200

I took the loader off my 'new to me" 900hr BX2200 for the first time today. Mine is the old type where the loader valve body stays with the loader. As soon as I restarted the tractor I noticed oil slowly running out the nearest (right most) connector. I dug out the loader parts books...

Hi again from upstate NY, tried a search and found great threads on leveling the deck, however I need help on the height knob. Have a new to me BX2200 with 60" deck. I am having trouble getting the suspended mower deck cutting height knob to work anywhere close to correct. I tried adjusting...

I have been debating pallet forks and have been suffering from sticker shock on the combined price of forks + a quick attach system. Knowing that I was not going to figure out what I wanted soon I came up with a set to use now. It would help me decide on if I would be happy with fixed width...

Found one of these with 1500 hours, 54" belly mower, and an FEL for about 7900. The dealer has not set the actual price yet because it just came in but the sales guy said he expected it to be ABOUT that. Is this a good price? It seems high to me considering the hours.

After reading a few posts about changing this thing out, I was a bit leery of getting into this. I already had the floorboard off in conjunction with a hydraulic hose change. I figured while I've got it apart, I'll fix/clean what I can. It turns out that the horror posts about the fan change on...

I have a BX2200 that was having issues turning over and starting. I replaced the battery and still have same issue. Can hear the fuel pump going and the starter tryes to turn the engine over but just makes a loud clicking noise. Is the starter bad? Seloniod? Help please

New to tractors, have blackland prairie gumbo soil. Have a used Kubota BX3300 with 450 hours on it, a large garden, lots of hope and lots of frustration all at the same time. Have a lot to learn so looking forward to speaking with y'all!

well the grass is starting to grow and you know that means time to get the mowers in shape/well the gutter arount the deck of the old bx2200 was a lot of rust so I tok the deck off to wire brush then pain as I bought some kubota orange paint at ts and when I got the deck off I found thisso of...

I am replacing the front tires on my BX. They had a lot of brown goop maybe fix-a-flat in them which has messed up the bead seat area. I used a wire brush, 100 grit sand paper, and brake clean to get down to the bare metal. I am going to scuff the outside of the wheel and prime then paint...

Worked fine and plowed the blizzard of 2013 fine. Went out to do clean up and it won't turn over. Noticed fluid underneath and found the hyd fluid is very low and leaks underneath. Just paid $357 to have both hyd power steering lines replaced. Is there a safety that won't allow starting with low...

I looked at a BX2200 with 330hrs, loader, Curtis soft cab with heater and BX2750 snow blower with electric chute for $7,100 today. It has never had a mower deck on it, just used to move snow. The tractor is in very good shape for its age, but the no deck throws me on the value, what do you...

I need to replace my fix-a-flat'ed front tires. Plan to repaint to get a good clean seal for the bead. But which color, and is it the one that is the same as chevy engine orange. Also would it be a good thing to use bead sealer along with the new paint. Or is that overkill and just gunking...

Hi I am the proud owner of a new to me BX2200 with 940 hours on it. It came with a FEL, 60 inch belly mower and a box blade. The tractor is my personal toy. I want to build a few water garden ponds and my back is not up to the digging. There was some minor front end damage as the hood has a...

Hello, I'm a new Kubota BX2200 tractor owner and I have very little knowledge of hydralics. Mt BX2200 has a 4-way valve joystick-type hydralic countroller mounted on the driver's right side. I have a BX2711 front-mounted quick hitch which has (2) hydro hoses to adjust the up/down pump and a...

Hello, I'm a relatively new Kubota BX2200 owner. The one I bought was lightly used and came with the belly mower deck already attached and the BX2763 snow blade and BX2711 front hitch. As I was trying to figure out how to install the front hitch and snow blade, I realized the belly mower...

I just purchased a bx2200 with the front end quick hitch. The snowblower attachment (2750) is on it. I would like to attach the rotary broom. What is the procedure to disconnect/reconnect. Need to know specific details to disconnect mid PTO. Thanks.

Gents might I get some opinions on the value one would say is a fair price for a 2002 KUBOTA BX2200 ? It has been carport stored, has 100.6 hours on it, it has a Kubota FEL #211. It is in great shape and includes the 3 point hitch assembly. TIA!

Hi Guys I have been on TBN for a long time but have been not too involved; it seems there is more to do than the amount of hours in a day allows. Anyways I was in a hurry to get the grass mowed tonight as it is looking like rain. I jumped off the tractor to move something and when I went to...

Comes with FEL, 60" deck, and is painted a delightful orange color. Around 800 hours.

Greetings, long time forum reader/lurker, just purchased a 600 hour Kubota BX2200 with the 60" deck and front snowblower for my 2 acre lawn and 135 foot driveway. Looking forward to using it soon but I had a few questions for the experts here. If the questions seem odd, I found it on line from...

Background: I am trying to help my Dad out with his BX2200 to make it easier to swap out the FEL and front mounted snow blower. He originally purchased the BX2200 used with a mid-mounted mower deck and LA211 FEL. After some time he purchased a used Kubota front mounted snow blower, and the...

Hi. I just bought a house on 5 acres and as part of the sale, I became the proud owner of a Kubota BX2200. I want to buy a PHD to help me put up a large fence and I've heard that they don't have enough down pressure and usually end up just spinning around making everyone frustrated. (I live...

Last fall My husband was using the tractor cutting high brush, the fan blades under the tractor we gone due to the high brush. and the tractor got hot. He stopped mowing and got it back home. Replaced the blades on the tractor and now it will not start.. Does anyone have any ideas what to check...

Soon after I bought a BX2200 in 2001 I decided it needed a cab. My friend John Livingston and I got to work. The frame is 1" square thick wall tubing. The sheet metal is 16 ga. Side and rear windows are lexan. Windshield is safety glass. Heat, radio, windshield wiper, etc. If I were to do...

It is nearly certain that I'll be moving and I'll only be able to use a very small mower at the new place. I have a 330 hour, meticulously maintained (and documented maintenance) BX2200 with the loader, 60" deck and the Kubota rear bagger. Can anyone recommend a good way to determine a fair...

i have a bx 2200 that runs smooth when the engine is cool but when it gets warmed up it runs rough. it seems like it is missing on one cylinder. any suggestions!

does anyone have an idea what a curtis soft side cab for bx2200 and others, is worth. It has the mirror kit looks like it was never used. and has a window wiper on it. has some other parts too, no heater for it though. I have this and am thinking of selling it, but have no idea what to ask for...

Hi all, I had an unusual problem with my BX2200 this morning. Here's what happened: Go for start, ignition turns on (light ok), preheat a few seconds ok, go for starter, engine starts immediately but then stops as soon as I let go of the starter back to normal position (ignition). I tried...

my used bx2200 has two sets of rear lights for turning signal and flasher. I purchased new lights and my question is, do you have to remove the decking the rops mounts to, to get to the wiring i removed the spreader bar behind the seat in between the rear fenders. and there is wiring harness'...

After a number of posts over time on the ability to stop a diesel engine I was curious about my BX2200. I looked at the Parts Manual which shows a stop engine lever and a separate stop solenoid but it does not appear obvious to me how I could "manually" do this. Or can I? There seem to be...

As a new owner of a tractor, I find myself on this site all the time. Great info and respectful users. Bought a used BX2200 2002 with FEL 590 hrs, new Ansung 52" tiller, new 48" Taylor Made rotary cutter, 14" King Kutter mid buster for furrows when planting seedlings pines and tearing up roots...

I have a bx2200 that I have just had to replace the HST pump due to low pulling power and issues with moving. The 3ph worked perfectly before I replaced the HST pump. After replacing the pump and filling it back up with Kubota UDT, the 3ph will not lower or raise. The linkage is intact. The lift...

I want to add a FEL to my BX2200. Since Kubota no longer makes the LA 211 and I can't find a used one what are my best options? Can the LA 243 be adapted by drilling new holes in the frame and using the BX 2014 four position control valve? I am a decent welder and don't mind a little...

Just a note that I have a nice 2004 Kubota BX2200 with 60 inch deck and only has 500 hours on it , turf tires , and all fluids and filters changed . In the Cincinnati Ohio area .Asking 7500.00 or best offer. Thanks

I made a set 3 point forks to move fire wood around on pellets.doesnt lift as much as i thought it would. If i took mower deck off would it help to lift more weight. thanks for any help

I've been shopping for a mower that will shorten my mowing times. We are now on 4+/- acres, and the JD 42" cut takes way to long. The Grand L with finish mower is hard to maneuver around all the trees and misc yard stuff, plus the big tractor tears up the ground so I can't take it near the...

I purchased a Kubota BX2200d with 279(if the meter is correct) hours? Machine looked to be in fairly good shape. Except the mower deck was covered with oil and dirt. Owner said the Oil had come from leaking hydro hoses that operate loader. Previous owner said that kubota dealer had recently...

I really needed to get an oil change done yesterday. I stopped at Advanced Auto and the only oil they had in the diesel section was Rotella (from Shell) in 10W30. They had other brands in other weights. The oil didn't SAY diesel but had a CJ-4 rating which seemed based on my web searching to...

I bought a BX23 last weekend and it did not come with the three-point hitch. Based on searching this forum, I know the BX24/BX25 hitch kit will not work on my Kubota. I have located a complete three-point hitch that fits a BX2200 but it is across the state. Luckily, I am traveling out there...

Need to fix my tractor

After sitting a couple of months I decided to crank my BX2200 yesterday. Turning on the ignition gets the satndard results (gages lighting up, ticking), but the starter does not turn over. When charging the battery showed no results, I took it to Autozone to verify dead, then picked up and...

Hi, I have just returned home after a couple months on a job. My nephew had helped keep the grass down with my tractor. Now that I have started it it is running very uneven. I bled the injectors and find that number 1 and 3 are pulling the load as the tractor will cut out when I bleed either one...

Can someone tell me what size the large nut is at the flared fitting connection on the hard hydraulic line under the front end. I have a leak and it seems to be coming from that connection. Having a hard time getting a wrench on the middle line since all the lines are so close to each other. Thanks

Hello, I obtained a BX2200 parts manual in .pdf and was wondering if it could be used for the BX1800? Does the BX2200 just have a bigger engine? Would there be any differences in the parts manual? Thanks in advance!

The time to downsize and move closer to the big city has come for me and my trusty BX2200 (2003-888hrs) and support cast: front loader LA211, backhoe -Woods BH6000 (2005), 54" rotary mower, DR Chipper pto 3 point hitch(2010), tandem trailer 14' about 6000 gross (electric brakes, 24" side walls...

I bought a new Ujoint (#K2561-16820 or #160 on diagram) between the forward drive shaft and the front drive shaft after losing one while mowing in the late fall. I assume it fell off and got lost for the same reason the new one is. The Ujoint is attached by a pin on one end but nothing to keep...

Having trouble with motor flooding every time i start it. When its cold out or warm doesnt matter . First couple weeks i had it no problems. tryed half throttle no throttle. seem not to matter how long i use glow plugs. takes 3-4 trys then at full throttle to get started. i am new to owner do i...

I have a 2003 BX2200 For Sale if anyone is interested they can msg me about it. This is a very nice tractor no issues. has the loader and mower deck also tractor has right around 300 hours on it Located in North Alabama Price $10,900.00 Thanks and happy holidays to all of TBN

I have a Kubota BX2200 with approx 260 hours on it. I noticed about 2-3 weeks ago that all the lights would stay on at all times (blinkers/hazard switches would not work--the lights were just steady on). My fuel gauge then seemed to act funny. Today, while the tractor was running, the lights all...

I have a Kubota BX2200 with approx 260 hours on it. I noticed about 2-3 weeks ago that all the lights would stay on at all times (blinkers/hazard switches would not work--the lights were just steady on). My fuel gauge then seemed to act funny. Today, while the tractor was running, the lights all...

I have a Kubota BX2200 with approx 260 hours on it. I noticed about 2-3 weeks ago that all the lights would stay on at all times (blinkers/hazard switches would not work--the lights were just steady on). My fuel gauge then seemed to act funny. Today, while the tractor was running, the lights...

Newbie question We will be out of state (Arkansas) all winter and my BX2200 will be idle, sitting in the pole barn. What procedure do you recommend to winterize it? Thanks

Just got kubota bx 2200 how play should the loader bucket have . thanks for any help

Got a cab for winter and the electric heater that came with it stinks. I was wondering if anyone has ever rig up a propane convection heater with the little propane 1lb. Tanks. I know I can make it work but any thoughts would be helpful. Thanks Golf

Apparently the fuel level sending unit is bad on my BX2200. I took a quick look at how to get to it and HOLY COW... I think half the tractor has to come off to get to it!!! :confused2: Any tips and tricks on getting to the sending unit without taking most of the rear structure apart???

When I raise my bucket I can't pull lever back to stop or nothing happens. I have to ease lever forward and bucket moves slowly with little power. Has anyone had same problem?

I found two kubota tractors im interested in on is a b7200 and the other is a bx2200. They are similar in price but the 7200 is about 500 cheaper, they are both hydrostatic and both 4x4 in good condition. I know the bx2200 is a alot newer and has more hp but i was wondering what one is the...

I just aquired a BX2200. It's in great shape but is leaking UDT fluid. I thought it was the filter and replaced it. Still leaking. It appears to be coming from around one of the two bolt heads below the filter. Does anyone know if these have seals and is it easy enough to just replace them...

I've been trying to buy a used front mount snow blade for my BX2200 but having no luck. I've found an L2040 blade with an L2180subframe at a good price that fits L Series Kubota. Anyone know if this subframe can be modified relatively easily to fit the BX2200?? I don't mind working with it to...

Attempting to replace the seals in the steering cylinder, I can't get the shaft to come out of the cylinder. I'm trying to remove the shaft from the end that has the hose fitting at a 15 degree angle (left side from seat). The wiper ring is out of the bore about a 1/4" and I can spin it on the...

Live in Central Tx on 5 acres, frontend loader is awesome, also have boxblade, auger & DR pto chipper.

My father-in-law just bought a BX2200 with loader but no mower deck, we have located a nice RCK48-15BX deck for a BX1500 for a great price. The question is will it work his tractor and what kind of modifications would be needed? Any help would be greatly appreciated. Thanks

Now that fall is almost here and the weather is cooler (MN) I decided to put together my Northern Hydraulic 3PH log splitter. It was on sale, with coupons, $509 (13 Ton version).... how could one go wrong? I am one of those one less engine to maintain person and I wasn't looking forward to...

Recently I noticed a small puddle under my BX2200 and traced it to the mid pto. It appears that it's losing Super UDT2 from that point. Does anyone know where I can find an online schematic or parts breakdown where I can see if this is a job I can do myself? Has anyone done this and have any...

I have never removed the loader. I assume when I do the hydro hose with the male end must store into the female coupler on the tractor.

My tractor started fine this morning, and ran great for 30 min until I turned it off and went to restart it 20 min later. Nothing happens when I turn the key, except the normal panel lights operate. The headlights work fine, I went ahead and charged the battery. I'm thinking I should start by...

I posted a while back about my hydraulic lever not returning back to center when I am using it and lugging the engine untill I return it manually to center. As this seemed to be an intermintent problem I was not overly concerned with it. Things have changed. It is now raising part way, then...

The gearbox on my 60"mmm pretty much exploded last time I mowed...not sure what caused it but i heard all this racket from below and when i shut off the mower and looked most of the gears, races, shims and bearings had decided to exit the gear box. about all i could salvage was the 2 main...

Anyone know where to get a replacement hood for my BX2200. Mine has some decent dents on the corners and 2 cracks. I'm wondering if it is possible to find a replacement and if it would be cheaper to replace or repair.

Just did the BX2200 steering hoses after one split and puked hydraulic oil. Replaced the two to the rear. After searching TBN there was some help but more information is needed. >The pair of hoses to the rear cost $180 at the local Napa. They made them from scratch. >The originals are single...

Is it possible to get extenders or replace the BX2200 lift arms with longer ones? I have a rear scoop that I cannot get the stock arms to fit on and my box blade needs to be further back so that I can get the lift arms closer to parallel to the ground when pulling as well as lift higher...

Hi All, I tried my new/used BX2200 for the first time with the 4' box blade I have used for a few years on my old 13hp 4x4 Ford 1100 gear drive tractor. The Ford handled the box great and I could drag up my steep gravel driveway with the teeth on the box scraper. No such luck with the BX2200...

So I bought a 2001 BX2200 with 60"mmm and hydro lift plow. I'm interested in finding out my options for adding an FEL. The FEL I have seen mostly on BX2200s are a one piece unit with the controls mounted on the right leg of the FEL and they come off when the FEL is taken off. My tractor has a...

Does anyone have a PDF of the BX2200 owner/operator manual? I cant find one online anywhere.

Hi, I bought my BX2200 with the LA211 loader last year. It's an 2001 model. Last weekend I did some intensive work with the loader and now I have a dripping leak on one of the hoses that connect to the "valve assembly/control box". In my manual it is labelled Hose #6. The leak seems to be...

Can I fit a B2763 blade onto a BX2200? I came across a good price on a used B2763 but Kubota says I need a BX2760A. Just wondering if I can make it work without a lot of changes? Anyone know? Thanks, Doug

I spent part of July 4th doing maintenance on my BX. While mowing with it last Friday it started bogging down on hills, and past experience told me it was time for new fuel filters. That was the main job Monday. While under the tractor I noticed that the HST fan has no blades left at all. It...

I am getting coolant coming out of a weep hole in the water pump. I am not sure what this indicates? should I replace the entire pump? Or just the seal and/or impeller and shaft?

The hydraulic lever on the BX2200 will not return to center. If I lower the mower deck to the set mowing height the lever will stay down. When rasing it will stay in the up position and you can hear the sound you hear when the pump has reached its limit. I have to manually return the lever to...

My BX2200 is 10 years old. I bought it new in 2001. Just yesterday I had a power steering line break while mowing the lawn. I had heard that the early model BX2200 had a know heat related problem with the power steering lines that causes them to fail. Does anyone know if Kubota has ever...

I've had my BX2200 for a week (600Hrs)and and used it once. Just my luck, a hydro leak. Easy fix, but have to wait for the line to come in. Just thought I'd post a few pics so you know the area I was talking about. Don't forget to check the steel line clamps turned out the bolts were lose...

What a relief to find this site. I have spent hundreds trying to resolve the steering problem on my tractor. Now, thanks to y'all I know exactly what it is. Does anyone know if a dealer will still honor the PSB-2001-048 recall? If not, has anyone put a new cylinder on and any tricks I need...

Looking to install an LA 210 loader onto a BX2200 Tractor. The loader came with no mounts and one dealer tells me I can't put a 210 loader on the BX2200. I've done some research and many say the LA 210 attaches the same as the LA 211. What mounting brackets should i buy? 210 or 211?

Just picked up a used BX2200d w/FEL and 1200 hours on it this winter for $6600 and the only maintenance I didn't do right away was the hydraulic fluid/filter change. Tonight when I dropped the oil from the HST, three 1/4 inch bearing fell out with the oil. As you can imagine, so did my...

Im going to be looking at a used BX2200 as my first sub compact. Its got a 54" mower, bagger, FEL and around 1400 hours. What items should i focus on to make sure are in good shape? Priced at $6500, looking for thoughts on what its worth and what to look for. thanks in advance guys!

What are the pros/cons between these 2 tractors. Both have similar power & hst and 60" mowers. What are the noticeable differences? Tires are bigger on 7510.

While investigating cheap filter housing strap solution (previous post) I noticed that if I left the engine shroud off, the headlights are VERY BRIGHT! After owning this tractor for 11+ years and being very disappointed with the brightness of the headlights, it appears that the cheap plastic...

Cheap strap that holds air filter housing to vibrating tractor engine broke again. Think it's time to create bracket to hold filter housing to tractor instead of vibrating engine. Will this cause any problems with the rubber intake hose?

I don't know how I got along without this thing for so many years! Now if it would only stop raining here in Michigan..........

battery is good, turn key on i can hear fuel pump but nothimg happens.

Hi all. Once again I turn to the brain trust here. I have a new to me 2001 BX2200 with 110 hours on it. It has a small leak at the left rear. The tire is wet on the inside and it looks like maybe it's leaking somewhere above the axle as the transaxle is oily above the axle also. I'll be...

Been greasing the BX by looking for fittings and greasing them every 10X, but where the heck is it in owners manual. Am I missing a few pages? Concerned I'm missing fittings I'm unaware of. Mower has a bunch, pretty sure I got them all. Any "hidden" ones on tractor?

WOW!! Three years ago I had the PTO control stick on my tractor. Originally, the dealer said that it would take two weeks to fix. I told them that my steering was intermittantly going out and to please check it, too. That was in May. After four weeks I started calling once a week. At first, they...

Anyone have one, or think it's possible? I have to cut about 1 mile of stream bed which also slopes about 4' downward on each side. Covered with tall grass. Can't even get close with MMM. To weedeat both sides takes about 3 days-no fun either. Not a lot of money to play with here. Is there a...

Is there a mini backhoe attachment available for a 2004 Kubota BX2200? My dealer said they configured one for someone once, but it was a bit of work and he felt the tractor was too small for it.

I caught a limb last fall and sheared off the blades on the HST cooling fan on the BX2200 I bought last summer. Planning on changing it myself this spring. Any advise? I think I own the tools necessary and have some mechanical aptitude. I bought the shop manual and have looked at it briefly...

I have a 2004 BX2200 with a steering cylinder that needs replacing or rebuilding. Apparently there was a recall on the cylinder because it would bypass in the cylinder and not steer (on mine to the left) unless you cranked the steering wheel about three revolutions. Kubota would replace the...

Hi All, I'm new to this forum and I recently purchased a used Kubota BX2200. However, it didn't come with an owner/operator manual. Anyone know where I can get a copy? Many Thanks. Patrick

Has anyone located a source other than the dealer for a mower belt for a RCK-60B-22BX deck that goes on a BX 2200? the $123.00 price at the dealer is a little hard to swallow:( I was expecting $50 - $60 price range, however I am not having much luck locating one on the net. Do any of you have a...

I haven't been to the forum in awhile, but it has always helped me in the past. I have a BX 2200 that is seeping gear oil on the back side of the axle at the pivot point. Has anyone ever replaced the o ring and back up that sits behind the fixed head of the bolt that goes through the axle and...

After clearing the snow today and finding I'm running out of room to put the piles, I'm thinking more about a snowblower. A neighbor's driveway is gravel, drops off fairly steeply from the street and then levels off. I have a plow mounted to the FEL so keeping it in the float position allows me...

I have a 2001 BX2200 with loader, Woods ground breaker backhoe, 60" mower and Curtis cab which I bought new. It's served me well with no breakdowns or issues for 300 hours or so. But this winter has been extra snowy and my job has become more demanding so clearing the driveway with the loader is...

Hello everyone. I'm new to the forum, and new to ownership of a tractor. I recently purchased a used BX2200 with a bucket, MM 54" mower, and real balast box. I'm learning so much from this forum, so thanks for that. Here's my question, Has anyone ever installed a tachomenter on the BX? I...

I have a BX2200 and recently their is a light on dash that has come on. The light is HST and my dealer has no clue. Any help on what this light indicates would be appreciated.

Hey guys, I want to hook up my Herd 3 pt spreader and throw some pelletized lime down. The mower deck goes up/down with the 3 point hitch. There's a "top" detent on the deck height adjust knob. Is this position so you can lock the deck up to the top and then raise/lower the 3 point implement? I...

There is a BX2200 nearby that has "HYDROSTATIC TRANSMISSON. Kubota front end loader. Kubota 5ft belly mower. Woods 4ft rototiller (low hours), Leaf vacum system (needs minor repair), 4ft box blade with rippers, 4ft landscape rake, 4ft KIng Kutter bush hog (works/cuts fine, need cosmetic...

I am looking to buy a 2001 Kubota BX2200D with a full Curtis hard cab model 1KBXAS and I want to install a Woods LS72 loader. Does anybody have a similar configuation and know for sure if the LS72 will fit on with it Kubota compatible mounts and not interfere with the cab at all? I have heard...

I am looking to buy a 2001 Kubota BX2200D with a full Curtis hard cab model 1KBXAS and I want to install a Woods LS72 loader. Does anybody have a similar configuation and know for sure if the LS72 will fit on with it Kubota compatible mounts and not interfere with the cab at all? I have heard...

I have a BX2200 with the loader ,60 inch deck and snow blade BX 2763 since new in 2001 with 418 hrs and it has been a wonderful little tractor and never been in the shop for repair.I'am considering looking at a new BX 2660 with the front loader ,and deck but I'am not sure if it would be much of...

When going from reverse to forward direction i have noticed my little Bota seems to "bounce" two or three times before levealing out and roaring off. It only seems to do it if I only PARTIALLY push the peddle (like half way push it down) If I push all the way it does not seem to do it. Is this...

So I went through my first tank of fuel last Thurs. I found out it's empty when the gauge still reads 3/4 tank. Friday, I filled the tank to the top with diesel, climbed on and started cutting the remaining 5 acres. I smelled diesel fuel and some smoking off the rear transaxle area. I stopped...

Hey all, long time lurker, haven't posted since I asked for advice when buying my beloved BX2200. So after a long weekend of digging out brush & trees, my headlights suddenly stopped working. I figured i blew a fuse, etc, but haven't been able to deduce my issue yet. I've done the following...

Just got my used BX2200. So far so good. I have the loader valve & 60" MMM. First attachment I'd like to look into is a power angling front mount blade-something that can push gravel & light piles of dirt around, maybe some snow as well. What do they cost new from Kubota? Are there other...

I have a 2001 kubota bx2200. The forward/reverse pedal began to get stuck after a couple of hours of operation. The next morning when I started it to use it, hydraulic fluid was pouring out at the filter gasket. Inside the filter was collapsed. I thought bad filter so I replaced the filter...

After my exhaustive search for a 60" or 72" MMM tractor, I settled on a nice clean, used BX2200 with 525 hours with 60" MMM from my local dealer. He is changing all the fluids/filters, cleaned it, and will install the upgraded seat for $50. Tractor was definately stored inside-paint looks...

Non-mechanic here. My bx2200 died while operating and had smoke coming out the left side. Took the side panels off and there is a part (has VDC on it) that has wires going into it. That is what smokes. Smokes when I turn on the glow plugs. Starter does not turn.

We have a BX2200 with a 48' mowing deck. This summer had to replace head because of constant overheating issues. Since replacing head, sending unit, thermostat, and new temp gauge, still will get close to red after mowing for about 30 minutes. Not loosing coolant.

I have a 2000 BX2200 with a 60" MMM and mulching kit installed. I have both the standard and mulching blades. This spring I decided to put the like new standard blades on while I sharpened/touched the mulching blades. It cut really well all summer and mulched the initial maple leaves that...

I know I've seen this covered before but I can't seem to find it again. Does anyone have any recommendation for a cab to put on my BX2200. I've looked at some on ebay for around $700. Are they any good. I have to keep the cost down.

Due to another thread and watching the video of the QI in operation, I have figured that it will be easy to add that feature to my BX2200. I know it's not as good as Position Control, but it will make it easier to make small adjustments with the boxblade or other implements. Kicking around some...

I have a bx2200 that has been running fine. Yesterday I went to start it up and it will start up great, but once I let the key go and it moves back from the start position the engine promptly quits. I did a lot of tall grass mowing last weekend so I wondered if this may just be an issue of...

Ive been wanting to buy a sub-compact tractor for years.. I finally saved up the $$$$ and bought a 2005 with a 60"mmm and a 211 loader. It has 213 hrs and the power steering is giving me crap. It will not turn to the right sometimes if u turn the wheel slowly.. Turn it fast and its fine...

bout 500 hrs...good cond..small dent in the hood..fel also. mid mt 60'' deck. throw in a 4 ft bushhog too...maybe another 400 bucks worth gimme an idea to sell it.. gary

Hi All, I have a bx2200 4x4 FEL. I use it often. Several times a year I have water in the fuel. I know this from the white smoke in the exhuast as I try to start it. To get going, I pull the fuel filler closets to the engine, turn the key to cycle the fuel pump, and purge the water. My...

This is my first post to the list but a long time lurker. I found a BX2200 on Craigslist for $1,000 and couldn't resist the challenge. No, it wasn't a scam but it does have some fire damage. It will need rewiring, hydraulic lines, a new seat and dash and a lot of paint and body work. I have...

Just bought a BX2200 with 2000 hours and the right rear axle seal is leaking and dripping on inside of wheel. BX2200 service manual shows that to replace the right rear axle seal you remove the tire/wheel and pry the old seal out on the axle, reach in and remove snap ring, and tap out axle from...

I have a 2002 BX2200. When the key is in the on position, The blinkers are blinking even though the blinker switch and the hazard switch are in the off position. Does anyone have suggestion as to where to start to look for a solution?

BX2200 will run fine for a couple of hours and then will start lossing power and start sputtering and shaking, i will idle it down and let it "catch up" and it will regain all its power and then do it again in a few minutes. I changed both fuel filters, and added some seafoam to the fuel in...

The center balde of the mower deck won't stay tight. Any solutions?

ok i havent been on here in forever i havent had any probems out of my tractors lol anyways i started cutting grass with my bx about 6 weeks ago and the first 4 were ok but i had gotten done mowing one day and parked it in the garage it sat for prolly 5 or 6 days when i went to get it out there...

Hi folks. A buddy of mine has a BX2200. He's looking to install a tachometer on it. Has anyone done this with there BX2200 and if so what type of Tack did you use and where could I get one. Thanks for your help.

The original battery finally died on the little Bota, after 8 years. so i need a new one. but the battery does not have any markings on it for me to tell how many cranking amps etc. anyone know what decent (not to expenseive) one to get

Hello to all! I was working on clearing some brush today and got a fuel leak on my BX2200. This happened once before....something came up and pushed off the fuel line...not so lucky today. it seems to be leaking out of the inlet side of the fuel pump (attached a pic). What do you guys...

Last spring I had to rebuild my diff lock as it was completely destroyed. After I finished I had a drifting in my steering, I have to constantly turn very slightly in order to keep the tractor going straight. I thought maybe there was air in the lines for the steering, but it never did go...

Okay, I have a leak on my lift cylinder connector. There is a plug on the top of the square connector where the hose attaches. I see the O-ring blown out, sticking out from under the plug. I have the parts breakdown and number (75590-13270), but I didn't notice how the plug comes out of the...

Anyone have a clue as to why the stop solenoid on the injector pump only gets power from the white wire when the starter operates? The red wire seems to be dead. Are there relays in this system? If so, I can't find one.

Have searched as best I can but can't find any conclusive answer so apologies if I am repeating previous posts. Problem - engine runs when on starter motor but when key released to run position it quits. Half hour before this happened the slow blow 50A fuse blew tho I just shorted it to get...

Can anyone give me some insight on how to tell the difference of a 3-way or 4-way loader valve on a BX2200? Last weekend I purchased a 2000 Kubota BX2200 with loader, 60" mmm with mulch kit, shop manuals, and a few extras with only 299 hours and garage kept. The 300 hour service had even been...

I have a BX2200, MMM, FEL purchased in 2004, 480 hours, very good condition, but kept outside. Bought a new BX2660, but the dealer is not interested in carrying used eqt. anymore, so no trade-in. What do you think is the right price for this in Northern VA? I see similar used ones listed for...

Looking at used. I don't see alot of difference other than BX2200 newer model. Equiped with FEL and brush hog or box blade around $10,000--little less. Would kindof like to have mmm but don't seem to be on many of the models. Which is best and why? Am I missing something? Thanks

I will be changing the Super UDT for the 300 hr service. Now that I have a FEL installed, I was wondering if I will need to bleed the hydraulic system afterwards. Any pointers would be appreciated. Thanks

My tractor has suddenly developed a very loud intermittent knock. I mean loud! like somebody hitting the engine with a hammer. Nothing at idle, often but intermittent bangs with load. Engine has 820 hrs on it. Starts and runs easily. No smoke except first starting puff. There is not...

I'm a newbie with 15 acres of trees and prairies to maintain in the Waterloo, Il area... I'm in need of a pto operated brush cutter, and other pto accesories like log spliiters etc but i'm not sure what would be appropriate for this small tractor...and so i'm looking for new or used equipment...

So I recently moved up to the SE region of PA and have a little over 3 acres, probably 2.5 of which is grass. I think I have decided on a BX series but have a couple questions. Mainly, what are the differences between the different tractors noted above? I know they are progressively newer...

Yesterday, when I went to crank, I noticed the glow plugs didn't come on. It still cranked though, but I noticed the fuel and temp. gauges weren't working. Today I checked the fuse, which was blown, and replaced it. Glow plugs worked and it cranked. Gauges didn't work. Turned it off and...

Hi all, I've received close to 60" of snow thus far and after a couple 20+ storms, I was able to convince the wife that a snowblower for the BX would be a "smart" (read "fun") purchase. So...with that being said... What are you guys' thoughts on a good blower for a BX. As well, I'm curious...

Hello, I have looked into most of the old threads and decided I would like a curtis hard side cab and today found out no longer available Sims still has the one with a soft door and a curtin but that seems to be the only one still made. any one know how much work would be required to use one of...

Should a bx2200 be able to lift the front end by rolling the bucket? I can get it to lift the front end by rolling the bucket and then putting the arms all the way down, but if the arms are down and the bucket is level it will not lift by rolling. Thanks.

Hello, I think I have an oil leak on my bx2200. It isn't much, but I just want to know what I am dealing with when it starts leaking more. Attached is a photo from Messicks web site. It shows the part that is leaking. The oil appears to be leaking from the gold square thing to the left of the...

In the past I posted that I was converting a B2650 snowblower to fit the BX2200. I received several inquires as to my progress and whether it would work. The B2650 was designed to fit the B-series tractor. Thankfully the frame widths were similar so converting the mount was relatively easy. The...

Greetings. Looking to buy my first Kubota. Currently looking at a BX2200 with FEL and 60"deck. Tractor has about 1100hrs. This seems like a lot of hours to me so I am looking for some advice on price and wear items that I should be looking at. Thanks

Im shopping for a blade to plow snow. I've seen blades that clamp onto the front loader bucket that appear very easy to use. My concern is that it might make the tractor a bit front heavy and cause it to lose some traction. Can anyone suggest if that would be an issue using a clamp on front...

Hi All: I've been looking for a compact Kubota TLB for a while now that will satisfy needs and budget. I just saw a used BX2200 on Craigslist with a woods backhoe (6000) mounted on it. I plan on using a BH to remove many stumps over the next few years. However, I don't believe its recommended...

Already changed the power steering hoses and several of the loader hoses had to change another this weekend the factory hoses are junk.

Both are used. Here's all I know so far: Deere: 4WD 62C mower deck, 300 hrs, Hydro. $7,900 Kubota: 4WD 60" RCK60B Mower deck, 431 hours, Hydro. $6,900 Dealer claims Deere tach was replaced at 289 hours and currently shows 300 hours. Gives me a bit of a bad feeling.... Both are in nice...

1st time post. I have a 2002 Kubota BX2200 and was one of those that did not buy the FEL initially. Now I own 5+ acres and find the need growing daily. New cost for a LA211 FEL (original spec) is north of $2800 installed. I found a slightly used LA243 FEL spec'd for the BX2350 at $1600 - my...

Just noticed a leak from within the fabric wrap covering what I'm guessing may be the power steering pressure hoses. The actual leak appears to come from fairy high up. Anyone experienced this problem before? Before i pull it apart, is this an easy fix for a new do-it-yourselfer, or should i...

Any suggestions for a rear-mount blower for 3-pt. hitch on BX2200? 48" or 52" ? Pros and cons? Thanks in advance.

Hello, I just bought a 2001 bx2200 (my first machine), and had the thrill of finally getting a tractor to help with my long driveway beat down with a fuel leak. The machine is very clean, with 475 hours on it, and not a drop of oil or diesel leaking from anywhere, so you can imagine my...

I have a 2000 BX2200 that is giving me troubles. When I turn the key to the start position the engine turns over and sounds like its running if I keep the key held in the start position. when I release the key, the engine dies. I am trying to find the stop timer, but when I look where its...

Thanks to schrand and Volfandt who helped me diagnose why my 3ph wasn't lifting: a coupling on the FEL wasn't completely connected. Anyway, I had been trying to figure it out prior to their suggestions and had discovered the tranny fluid level was low. I kept checking the dipstick as I added...

The 3ph is not lifting. I had just put on the FEL, and had had some difficulty getting one pin sleeve aligned. There was also some difficulty getting the FEL to respond to the hydro stick. I checked UDT which was low, and filled it. FEL then worked fine, but 3ph will not lift. I took off...

Well, my wife tried out the FEL on the L48 and now wants one for "her" BX2200. I have searched this forum, Googled, and Binged coming up with the following as possibilities. Koyker 120 Woods LS72 Kubota LA211 The LA211 seems to always be attached to something and Kubota doesn't make them...

Hi Everyone, I am having a problem with my BX2200 starting. My tractor does start but only when I turn the ignition switch the whole way to the on position. When it is fully turned to on nothing happens but when I release the pressure a little bit I hear a click and the engine tries to turn...

BX2200 (D905 engine) won't start, electrically dead. After mowing the lawn last weekend, parked it in the driveway for about an hour. When I went to move it into the garage; turning the ignition key did nothing - no fuel pump noise, no dash lights, etc. Following the repair manual, here is...

steering problem ,i have a problem steering my tractor it seems like it has air in the sistem but it doesnt help

The support bracket that holds the gear box on the mid mount mower cracked and broke where the bolt holes are, and i need to replace it (left side as your sitting on it) I have two questions; 1) isn't this a kind of a strange piece to have break? I ordered a replacement ($49), kind of...

Hope someone out there can help me with these questions. I need a new spray system for my vineyard. I'm currently running a 15 gal tank with a 12 volt electric motor, but the coverage with this system is not adequate and the electric pump is not consistent with it's pressure output. Here are my...

My MMM seems to be slipping down. The adjustment screws on the rear mower links are in the topmost position and yet I have to mower height knob at the 4 inch position to mow. Any lower and I'm mowing dirt. I used to mow at 3 or 3ｽ. What am I missing? Is there some other adjustment or stop that...

Does anyone know the aprox cost of a new floor pan for a BX2200. Our local stealer quoted me a high price and before I buy it I would like to know what they go for. Thanks guys!

BX2200 with 550hrs. Got in a wierd angle while mowing my ditch this week end and needed the rear wheels to lock. pushed the Diff lock peddle (seemed rather soft) but the other wheel did not lock in. I can see where the linkage runs to and everything seems to be connected fine, is there an...

I am looking at two used Kubota BX2200 at local dealers who deal in used equipment or trades. They are similiarly priced, but one has 200 hours and the other has 496 hours. Both are for sale used The 496 hour machine has been thoroughly tested, all fluids and filters just changed, etc. and it...

A couple of hydraulic lines blew out on my BX2200 last week, so I thought I would just replace them all while I was at. Good plan, until I forgot to take note of how the hoses were positioned and routed coming out of the valve manifold. It's a really tight fit. Unfortunately, the LA211 parts...

Hi, I have problems with the steering. I have replaced the seals in the ram 6wks ago but has gone wrong again. Is there another box under the steering wheel with seals in. It thinks about steering after a few turns, worse to the left than the right.

I took my starter off to have rebuilt but when I went to put it back on (weeks later) I cant remember where the white wire (the one that comes apart in the middle) connects back to? If I hook it up on the post with the 2 red wires the tractor starts fine, but wont shut off, if I put it on the...

I took my starter off to have rebuilt but when I went to put it back on (weeks later) I cant remember where the white wire (the one that comes apart in the middle) connects back to? If I hook it up on the post with the 2 red wires the tractor starts fine, but wont shut off, if I put it on the...

Hello, I recently bought a BX2200 and now I'm looking to purchase a loader. My local Kubota dealer couldn't source a Kubota brand so they suggested a Koyker Model 50. I've done some searching and everyone seems to be pleased with Koykers. I'm just curious if anyone has any experience with...

I'm noticing that my 2002 model BX2200 (515 hrs) has been losing power recently when mowing up hill. I always mow in low range, and I've never noticed this until recently. It also seems to be running hotter than it used to also. Never had any problems with this gem until having to replace the...

I posted this yesterday, but I guess in the wrong place. I have a BX2200 with 400 hours on it. The bracket that holds the drive shaft for the front axle snapped off at the frame. (Picture attached.) Anyone ever hear of such a thing happening ? The tractor has not been abused, nothing has been...

Anyone ever hear of the bracket that holds the bearing for the front wheel drive shaft failing ?

Anyone ever hear of the bracket that holds the front wheel drive shaft breaking ? I had a catastrophic failure of mine where the bracket broke completely through on one side and left the corner of the other side bearing the load. It cracked off at the corner where it is bolted to the frame. I...

I just bought a 2002 BX2200 with a 60" MMM and 80 hours for $6850.00. It looks brand new. I'll be picking it up on Saturday. The original owner lost the manual and I don't know anything about servicing or the operation. What should I inspect before using the tractor for the first time...

I was recently involved in an accident that will leave me partially disabled, and, as such, I will no longer be able to pull the deck out from underneath the tractor in order to change the blades. A salesman who used to work at the Kubota dealer from whom I purchased the tractor said that I...

So I just finished mowing and pulled in to re-attach my loader. Shut it down, connected my hyd. hoses and went to start it back up and "NOTHING". So I thought I had it in gear, but nope, it's in Neutral. Can that safety switch go bad? Thanks for the help! Guy

Posted this in another forum...this one might be better: We have a Bx2200 from 2001 and we use it with a FEL, 60" mower and rear blower. We have worked this tractor quite hard and it has developed a few leaks in the front. Thinking of trading it for a 2660. If we get just the tractor, will...

We have a Bx2200 from 2001 and we use it with a FEL, 60" mower and rear blower. We have worked this tractor quite hard and it has developed a few leaks in the front. Thinking of trading it for a 2660. If we get just the tractor, will the FEL and mower deck we currently have work with the...

Hi group, I have a BX2200 bought new in 2001 and it finally needs a starter. Can I assume that it is a fairly easy replacement? Also, suggestions for best place to order from? Thanks

I've been noticing for a few years now the left side only begins lifting after the right side is nearly all the way up. I'm guessing the right "driving" lift arm, shaft holes, and/or left lift arm are worn out (or the pins). Anybody else seeing this? About 700 hours of mostly mowing, and I...

I've seen threads regarding a skid plate for the BX, but haven't seen any threads about guards for the front axle/power steering arms. I used my BX and bush hog to clear old logging trails last week on one of the farms I hunt, and tore one of the rubber boots on the power steering apparatus...

Sorry long post: Was doing my spring maintainance of changing the oil and all the filters on the 2200, and started the tractor up to check for leaks. and since I had the engine cover off I notice a lot of slack in the throttle cable, no big deal so i adjusted it ( had since turned the tractor...

Just joined, this is my first post on your site; what a HUGE resevour of wealth freely shared here. I am looking at a 22hp BX2200 HST with 600 hours, for mainly mowing former cattle pasture and areas around the living compound. I also would like to somewhat maintain the old dirt roads that...

I am getting ready to pressure test My BX2200 , for the many times mentioned annoyance of running warmer than it should. My question is this: How many have actually pressure tested their system and if You have, What adapter have You ended up using to fit the radiator? I have already talked...

Have a chance to buy a good used BX2750 front mount snowblower complete with quick hitch that came off a 2003, BX2200. I would like to install it on my BX2350. Are they compatable? It has a crank shoot.....Thanks for the help:)

I happened upon this site a while back BX full layout pictures from hobbies & interests photos on webshots and I wondered if the owner is a member of tractorbynet, and if so who? This is the first site Google will bring up in response to the query "BX2200 mods." And this has been so for at...

Hi All: It's been about 8 years since my last post (and these are my sins, oops wrong forum!) Anyhoooo... I just got my Kaboodle back after a complete going through with a new seat, new canopy (pic), new cutting edge on the bucket (maybe I'll paint it in springtime (nah), tire chains on...

After using my 2200 on sat, I started it on monday, and all hydraulics were gone. No bucket lift, no 3-pt, no transmission or pto. I'm wondering if I broke an internal shaft or pump. Thanks Stu Johnson stuj1115@yahoo.com

I was pushing back some of my frozen snow banks to make more room for the new snow and found myself high centered on some snow. When I went to dig myself out I saw a lot of oil in the snow. I thought I must have punctured the oil filter so I took it off and put new one on. Backed it out and...

I'm installing an auxiliary heater on a BX2200 and have a few questions. I'm using a 13,000 BTU unit from Mill Supply, typical setup. I'll be tapping into the system at the lower thermostat housing, and either at the upper or lower radiator hose. For reference I'm using installation instructions...

It's amazing how much has come full circle between these machines- metal hood and fenders oil, air, fuel and hydro filters match almost exactly the same length with FEL Gotta love what they have improved, though!!! The 2200 has 650 hours and goes into semi-retirement with only about .25 acre...

does anybody know if the bx7326 rear aux. kit to fit a bx2350 will it my little bx2200