john deere 5085m

2015 john deere 5085m keeps throwing code ECU 3673.07. It worked fine last fall, it’s been sitting pretty much all winter. Thanks in advance

Just bought a JD used. I'm Having some indicator lights Show up. questions: how do I read codes? Can I get an affordable diagnostic tool? Similar to a OBD 2 scan tool? looking for a manual for my machine. Hard copy that isn稚 80 bucks. Any suggestions? 2010 5085M thanks.

I just purchased a 1250 hour 5085M. Unsure how to get records of this particular tractor in terms of maintenance or repairs. Also any suggestions on what baseline maintenance I should do prior to any heavy use? My needs are not very intensive for this tractor, but want to start right --desert...

My dad has a 5085M open station tractor he uses sporadically around the farm. Last week his headlights would not turn off unless he disconnected the battery. We have since figured out if the hood of the tractor is open, the lights will stay off. Once you close the hood, they come back on...

Hi there, I was hoping to get the opinion of others on the forum. I currently own a JD 5205 that is about 12 years old with 3500h. It has been split 3 times due to the PTO clutch burning up. I have been told that it was due to the MX10 shredder that I use on it. After the second time, I...

Changed my transmission/hydraulic oil on my 5085M today, all 11 gallons, along with a new filter. After getting done along with various other maintenance items, I noticed that the Electrohydraulic Hitch Indicator lit up in the dash, which supposedly means that there is some sort of hitch...

I'm finally getting around to replacing the fuel filters on my 5085M after 6.5 years of operation (mine is a MY 2012). I only have a little over 700 hours on it, so that's my excuse for not doing it earlier. :D There's a short filter on the left side next to the oil fill neck and a long one on...

Would a JD 5085m with front weights and front end loader be able to handle a 3 pt 8 row Allis planter? I’m unsure of the weight. This would be used in conventional till ground and less than 10 acres a year to plant some deer plots around our farm. Would the 5085m be able to pick this planter up?

Hi everyone. I've been "lurking" on the site off and on for a while and have gained enormous knowledge (compared to where I started) from y'all's generosity. I'm currently working through the Columbia Gorge online hydraulics class to get a better understanding of hydraulics (huge thanks to ...

Jd 5075m vs 5085m or higher eseries? I'm getting one of these tractors in the next week or so. Loader with open station. My question is, do you think it's worth the extra money to get the 85 over the 75 also would you jump up to the 5100e for any reason, I really need advice. Thx guys

Selling my JD, I have too much equipment. Don't use it enough to justify it's existence. 214 John Deere 585M - farm & garden - by owner - sale David

Selling my JD, I have too much equipment. Don't use it enough to justify it's existence. 214 John Deere 585M - farm & garden - by owner - sale David

Hi, Can someone tell me the location of the fuse box for an open canopy 5085M? My grapple on my 5085M with 553 loader stopped working on Sunday. Seems electrical in nature and I don't hear the solenoid click so thinking it the coil, thumb switch or a fuse. Thanks Ernie

Hey guys, My 2012 5085M has developed an issue with the 3pt hitch during raising. It is very choppy, as in, not smooth at all, during the raising of an implement. Here's a quick video I took from the cab. If you look at the cab/window frame at the lower portion of the video, you can see how...

ATTENTION!!! 5000 series owners. (5M, 5E and the older 5XX5 series, and maybe others) "If you haven't had this problem yet, you will." And you need to know what to unplug so that you can start your tractor again. EVEN if you've never heard of this, PLEASE read this thread. (You might even want...

So this past weekend I was doing some chipping clean up over at my mother's house less than 0.5 miles from my place. I was parked and chipped for a while, then went to move to a new location, not realizing that a decent side stump was hiding right in front of me. It caught the inside of the...

I have a 2010 JD 5085m lately it's got to where the N light will flash when you put it in forward or reverse. Usually you can just flip it back to neutral and it will stop flashing then it's good to go. This time it just keeps flashing no matter what it do. Any suggestions?

I have a 2010 JD 5085m lately it's got to where the N light will flash when you put it in forward or reverse. Usually you can just flip it back to neutral and it will stop flashing then it's good to go. This time it just keeps flashing no matter what it do. Any suggestions?

using a 7 ft rotary mower. set desired height but unable to set draft control.

I have a 2010 5085M with 700 hours on it. It looks like I may have the opportunity to buy a 2012 5083E with about 100 hours on it. So, here's the real question: Will there be enough difference to tell? Just for clarification, MOST of my tractor time is spent in the hay fields. The 5085M does...

My 2010 JD 5085m was last used rolling hay about a month ago everything worked fine. It's been setting for a month. Now the pto will not do anything the dash light don't even come on. And the lift wont go down. I do get the lift warning light on the dash. Any ideas on what could cause this?

I have a 2010 JD 5085m. When letting out on the clutch after changing gears when on road or at higher speed it jerks really hard unless you idle it down to around 1500rpms. It's like u can't just ease out on the clutch it just catches and goes. Do I have a problem or is this normal?

Purchased a new 2014 5085M with the premium top line cab. When you go to XM Radio the radio says Check antenna. Well there is only a standard radio antenna on the cab top, No antenna like you normally would see on a vehicle with satt radio. Anybody experience this situation on this series...

I need to hook up my JD 5085M with a good sickle bar mower. JD now uses Frontier for their sickle mowers. Their 3107 is their 7 foot model BUT is rated for up to 50 hp, my JD is 85. Frontier will not warrant the sickle mower on my tractor. Do I roll the dice on the warranty & get the Frontier...

Just ordered a new 2015 JD 5085M for spring delivery. It is load with all the bells and whistles. It will be replacing my 2002 JD 5320. Projected delivery is around March 2nd. Dealer is checking on doing the Gold Key factory tour for me.

I hope. David

Saw a press release on Deere's website that there were significant changes coming. DEF fluid, greater power, better cab, etc etc. A new hood is apparently in the mix. Anyone seen any pics? Pricing?

Left my staff to run the farm and new assistant decided to change fuel filters but did not know how to bleed it. It's still pretty new, and my former assistant handled last filter change. This has a plunger or something, no? Not like a 6000 with fuel pump you just turn on. Is there manual pump...

There have been several threads (last year) with titles that sounded like paydirt but inside were only fluff and generalities. More comfortable seats, luxury vs plain, etc. Also ALL were into cab models rather than platform models. I am interested only in the non-cab models. 1) Can someone give...

I am looking to buy new open station with a loader. Any opinions would be greatly appreciated.

I ordered a JD 5085M last month and hopefully it will be here by the end of April. Couple questions for you 5085M owners. What do you like most about the tractor and what are your biggest dislikes? Did you load the front tires? I read in the owner's manual you can shift from B to C and...

I was just quoted $53,600 on a Deere 5085M with the following options: - 16/16 with creeper - Iso station - Triple rear SCVs - EH controls - Radial tires - Cold weather Does this seem like a decent price? It seemed a bit steep to me from looking at other prices floating around but I wanted to...

Does the 3.05 liter engine on the 5075M consume significantly less fuel than the 4.5 liter engine on the 5085M?

Good Morning everyone!! I am new to the forum and am just getting started. Thanks in advance for information!

Ok Folks here's the deal let me know your thoughts: New 5085M Standard Cab 32X16 EH hitch Dual rear triple mid Vertical Exhaust Buddy Seat Big Sneaks(18.4x30 Radials) MFWD Cold weather Package Rear Fender extensions Skid Plates Eh right Fender switch Power Reverser Modulation Horn Antenna...

Well after I found out no dealer supports mahindra in my area anymore I found a 2011 5085m with 760 hours. Approved by my bank but before I pull the trigger I just wanna ask one more time if anything has anything bad to say about these tractors. I'm always aprehensive when I go to spend a lot of...

Hi everyone, I was checking my PTO on my 2009 5085M yesterday and it would disengage after about 10 seconds. Has anyone experienced before? I am thinking it has to be electrical (spool valve or solenoid of some sort), but I have no idea the location of the valve / solenoid. Can someone point...

I have a small (80 acre) farm that is mostly tillable and another almost the same size that has become overgrown. I am renting the tillable land currently. I am planning to start rowcroping on my own. I will hire/ sharecrop the combine work. I am planning g to buy a new or slightly used...

i have a situation with this tractor if anyone can help me ... i start the pto an after 10 seconds it stops by itself :(

This new tractor with 400 hours is throwing some error codes, and the dealership isn't real snappy interpreting them for us. Where can we get that info? Is there a John Deere utility for a laptop we can get? Last time it was the fuel filter, even though there was no noticeable drop in...

Anyone else having hydraulic problems with a 5M series? My tractor is a 2010 model with 421 hours on it. When I first start up, I have zero hydraulics. It's a PowerReverser transmission, so it won't move either. The only way I can get it started working is to crank it and let it idle a few...

I bought a 09 5085M with 430 hours on it. THe last couple of days I've been using in the hay and have experienced sudden losses of power. In D range on the road if I start up any hill at all, the RPMs drop like a rock. It won't even start in D-1 on the incline. And also while rolling hay today...

I ordered my new 5085M this morning. After 3 months of negotiating we agreed on a price this morning and I signed the papers. :licking: Now the wait for the tractor, 595 Backhoe and H260 loader to arrive, they are saying about 3.5 months. I ordered the deluxe cab, 32 x 16 transmission and a few...

Hello, I'm shopping for a bigger tractor and am in a toss up between a 4720 cab tractor or a 5085m. I have 5 acres of lawn to mow and 48 acres or pasture to take care of with the possibility of bailing some of it. I have two riding arenas to maintain plus about 300' of lane way to maintain. I...

New machine delivered today. Feels like a smaller version of our 6330 in terms of build quality, but there are a number of differences. Will get the weights on it in the morning and put it to work directly. Actually all of the controls are different than all of my 5000 and 6000 series to...

Does anyone know if there where two body styles produced in 2012? I looked at one at the local dealer and he says its a 2012 but the hood style doesn't look like the ones I have seen posted. They are selling it as a new machine with 55 hours on it, any thoughts on a fair price. Its a basic...

So I stumbled across this on cl today: Specs and price: My tractor is 85hp (70hp PTO) and I got my rears set all the way out, so the outside edge to outside edge is 86". Do you think I'll kill this tiller with my tractor? I got ground to till that have stumps and large roots just below...

Just wondering about the value of the fuel tank skid plate add on. Looks like it would be good for bush hoggin. Any ideas or comments would be appreciated.

Trying to decide between these two. Having a hard time getting a handle on a good price. The consolidation of dealerships makes it almost impossible to negotiate any price. It seems to be a take it or leave it pricing situation. This is alright if the price is fair. My question is what would be...

Trying to decide between these two. Having a hard time getting a handle on a good price. The consolidation of dealerships makes it almost impossible to negotiate any price. It seems to be a take it or leave it pricing situation. This is alright if the price is fair. My question is what would be...

Thought yall might like a pic of a couple 5085M's at the local JD Dealer. The one in the foreground is having a steel forest screen (or whatever it's called) and a belly skid plate installed. I hope they stuff the hydraulic FEL lines behind some steel too since they hang out so far! Dad has...

Thought I'd start a new thread about my Dad's new 5085M and share some info about attachments. Dad ordered his tractor sometime in July this year (2012) and took delivery early in October. Since then we have driven from here in Ga. about 1.5 hours south of Atlanta to Charlotte N.C. and picked...

So I got just over 100 hours on my 5085M, so it was time to do the 1st oil change, replace the hydraulic filter, tighten all hose clamps and grease all the fittings. So here are the needed "ingredients": That hydraulic filter is a monster! Just look at that 5 gallon bucket next to it. I...

How quiet are these cabs compared to the cabs on the 6020 or 6030 series? The only info that I can find from Nebraska Tractor Tests is for a 5093E which has a sound level of 78.9 dB as opposed to the 71dB of the 6220. Since 3dB is a 50% increase in sound level, 6dB would be a 100% increase. it...

Today my salesman called me and told me that the tractor was at the dealers and was almost ready to come to the farm. It was just missing the brake light kit and the beacon light. I told him that he could install it at the farm. I only got one picture because it was getting late and they close...

I'm having my cab frame replaced due to an incident that involved my GN trailer. I'm doing a lot of the labor myself, and I figured this would be a perfect opportunity to upgrade the stereo and speakers. Here's a shot of the cab after removing the headliner: Closeup showing the stereo...

Went to the dealers today, my "old" 5085M wasn't being used, maybe an 2 hours a week. So I've decided to get something else something that I can actually use on the vegetable farm. So I went to the dealers and asked him how much he can give me for my 5085M and he gave me 32K on it and I was...

I am going to sell my cab 4720 tractor and order me either a 5075M or 5085M. I have about 60 acres of land that I want to do some small scale row crop farming. Beside a hp and price difference, is there anything else that stands out between these 2 tractors?

I have a John Deere 5085M tractor and a JD 457 round baler. I have the baler's power cord plugged into the power outlet on the tractor. Sometimes, when completing the tie cycle, I'm getting a "LOW VOLTAGE" message on my electronic baler monitor. A parts man, not at the dealership where I...

I'm new to the site although I have been lurking for sometime now. Currently don't own a tractor per say, but my family, which all live on the same 30 acre tract of land, shares a fairly run down Case G430 with a FEL. The tractor still runs decent but has lots of issues as any old worn tractor...

Hello, I'm new to the site but just wanted to say that the John Deere 5085M 4 wheel drive tractor that I recently purchased is all that is advertized. I love it. I also have a 1959 International Harvester Gas 460 that I got from my Dad. Jack :licking:

So I got a 5085M on the way with the triple deluxe rear remotes, each of which will be controlled via the 3 levers within the red circle: That will work great for various implements that I have, especially my 3-way hydraulic blade. But I want to add a hydraulic top-link. Ideally, I'd like...

So I finally took the plunge and got a factory fresh 2012 5085M on the way. It will be equipped with the following factory options: MFWD (4 Wheel Drive) Deluxe Cab Instructional Seat Deluxe Corner Post Exhaust 16F/16R PowrReverser Transmission - 540/540E Electrohydraulic (EH) with remote LH...

I'm finalizing the options on my 5085M order I'm working with my dealer on and looking at getting a 8-10' cutter as part of the package. He told me he just sold a 5095M with the HX10 cutter, and that tractor can barely lift the ~2300 lbs HS cutter. Moreover, the front is real light, even with...

Narrowed down to the 5083e and 5085m. First the M -3 rear and mid svc's a, air ride seat, FEL w skid steer setup and bucket and deluxe open station. E series (cab of course), air ride seat, 3 rear and 3 mid svc's (3rd one is dealer add on) FEL w skid steer and bucket Quoted low 52k for each oh...

just a note see posting under ag tractors, transmisson mid shafts are breaking. dealer already has repaired 15 tractors.

Just want to let you all know that we run these tractors with mowers, flail, brush hog and mcconnel over the guard rail mowers for the highway department. The other day tractor stopped moving and pto stopped working, felt like something dropped out, come to find out from dealer as these are...

Anyone out there running a 5M series tractor? I'm looking at a new 5085M. (85 hp) Cab, MFWD, 16x16 power reverser trans, FEL. Probably will purchase in the next few days. Anything I need to know? (Good, bad, ugly) BTW, I have 60 acres of hay meadows and I want a cab tractor to use with my...

I got a new JD 5085M in September. The PTO is turned on by a pull type button that is the same button pull switch as all the new lawn mowers when turning on the blades. I have problems with this and I need to know if there is an adjustment that can be done on this. When I pull the button...

Hey everyone i was wondering about the price on a JD 5085M 70 pto hp. Capony 16/16 PowerReverser Standard tires Mfwd Open station regular not deluxe No loader Eh hitch 4-6 front weights + bracket. (100 pounds each weight) Used for hauling wagons max about 8tons. Fertilizer spreader max 1...

G'day, I thought I've post a few photos of my new 5085M open station. It arrived a couple of weeks ago, and since I read up on tractors on this site, I thought it only fair to reciprocate by posting photos of the new tractor. I few details. I opted for an open station (deluxe) ROPS model. MFWD...

How does Deere get 331 lbs of torque from the new 5085M (4.5 L) when the 5425 (4.5L) is within 4 eng hp and 5 pto hp and the 5425 as only 208 lbs? The 5425 was rated at 1500 rpms while the 5085M is rated at 1600 rpms. Even the 5075M (3.05L) has 300 lbs of torque. Are the numbers off? Thanks...