john deere 4400

So new- First tractor ever!! My John Deere 4400 was working great no problems- parked it in the shed for a day tried and thennothing no lights no dash no click. the little PTO light looked like it was on quickly when it stopped in that first moment there was Small click then nothing- like a...

I bought a John Deere 4400 new back around 2001 with hydro and later had a 4 in1 bucket installed the tractor is a tank. I am curious if anyone has ever replicated a plastic hood and side panels out of metal like some of the other brands of tractors have.

Have A jd 4400. Was snow blowing this am and when i went to turn on the flashers the whole tractor stopped with no power. The panel has no power. Battery is charged. Power is getting to the ignition key switch. All Fuses seem to be good...help!!

Was driving my tractor today, slowed to see if there was oncoming traffic. It stopped in its tracts and wouldn’t move. I have to lift the tractor using the loader and backhoe to get it into neutral. Range selector is hard to move and when I try to go forward or backward tractor stalls out...

New to the tractor world, I noticed that my front transfer case is leaking from drive shaft. I’m thinking a seal and possibly a bushing. If I’m going to pull it apart I figure I might as well replace the bushing as well. Is this something a mechanically inclined guy can pull off without any...

hi new here and after some advise ect so the front drive shaft seal is leaking and theres a fair bit of play in the shaft up and down side to side so i ordered seals bearings clips the lot im pretty handy with tools thats not the issue, my issue is finding the correct procedures on splitting...

Afternoon, I have a 4400 hydro. No start, no lights on dash. 12 vdc to double prong on key switch and solenoid small lug when switch is in the on position. All fuses are good. Switched cruise relay with start relay. Help?

Am in the process of restoring a 1998 JD 4400 Tractor with around 50 total hours on it from new. I have about 3 hours run time on it myself. The tachometer worked fine and just quit all of a sudden. The hour meter works fine. ALL of the factory safety's are functional. This is a pre computer...

I have a JD 4400 tractor manufactured in 1999. Yanmar 3 cyl. Does anybody know if it is possible to do an in frame re-ring?

Any thoughts on what's a fair price for a 1999 JD 4400 HST with back hoe (48), loader (430), and mid-mount mower? 870 hours. I don't know these John Deere's well (much more Kubota experience), but I'm looking for something with a hoe and loader for general land and road maintenance, and it...

I have owned my JD 4400 HST MFWD for the past 17 of its 20 years. Overall, it has been and is a good little tractor and has given me few problems. (The greatest problem was a fuel shutoff solenoid problem that I remedied by replacing the thermister.) I have several nagging problems now that I...

Used my 4400 with hydrostat transmission to mow some fairly steep hills with my flail mower. When going down the slope, I found the tractor would creep along at the desired speed, then speed up (like it was coasting or freewheeling just a bit) for a few to several feet, then slow back down to...

After months of sitting from some corrosion on the K2 starter relay, which I just removed and plugged back in a couple time, and she started right up. Then stalled from no diesel. Hmmm strange, I didn't put it away bone dry. Anyway, I had quite a pack-rat's nest under the hood. I added 3...

Tractor had fuel contaminated. Kept cleaning everything till I could get it to run. But even after some time it was still a little hard starting. I decided I would clean the whole system thoroughly. I removed the fuel tank, fuel filter, fuel lines and injectors. I cleaned out the tank...

A few months ago I purchased a John Deere 4400 tractor with a H160 Deere loader and model 72 belly mower. The tractor has four hydraulic outlets, all being used by the loader and bucket. The previous owner connected the mower deck lift hydraulics to the loader bucket curl outlets when he was...

Was wondering what you guys thought about the john deere 4400.. theres one for sale near me looks pretty nice and clean but has 3,000 hours on it .. thats the only part im worried about.. asking 10 grand. What do you guys think? Thanks

I have a JD 4400 hydro tractor that shifts very hard when disengaging the pto clutch. I have to jerk it hard to disengage the pto and engage the pto brake.The pto engages like it should. It broke the roll pin on the external link to the lever. I replaced all the components of the brake...

I recently spent considerable time spelunking through these forums trying to find out how to fix the problem with my JD 3-point hitch not lifting any weight. Or only lifting slowly at full rpm. While my only tractor is a JD 4400 perhaps this will apply to others as well. I was not satisfied with...

I have a JD 4400 compact Diesel Tractor that when in use it seems to have play in the drivetrain when you are under load and back off. And when I shut the tractor off, it seems to Clunk loudly right under the seat. I had a dealer Service person over picking up our Gator for a recall and listened...

I hope I can find some help. I purchased this tractor last week and have everything working except the drive system. The only way the tractor will move is in 4 wheel drive with just the front tires pulling. Any suggestions what to look for?

Ok everyone, bought a house with land and it came with a john deere 4400, jd 47 backhoe and other attachments. The man i bought it from was an older gentleman who took very good care of the equipment, regular maintenance and all. anyways, my problem is that i am trying to detach the backhoe from...

So I recently noticed a small leak from the drive shaft seal on rear end of driveshaft exiting centercase? next to hydraulic oil filter. it seems to be getting much worse very quickly. The seal is number 19 in image and I was wondering if that can be removed and replaced by just removing...

Hi all, I bought the tractor used and already had around 6k in repairs into it. (didn't know what I was buying) Anyway, the specs on the tractor says it should go 15.5 mph in C range and it's top speed is only 6 mph. It doesn't seem to be slipping at all when going up and down slopes or...

I have a 2001 Deere 4400 compact utility, hydrostatic drive. My Mid and rear PTO will not engage, not allowing me to mow or run any attatchments. When the yellow switch is up and the lever is moved forward to engage the PTO, the PTO does not engage. It does just barely move, but just by...

I'm working on my grandfather-in-laws JD 4400. The 3pt arms drop like a rock regardless of me having the control knob under the seat shut down. Doesn't seem to change speed whether turned towards turtle or rabbit. There is no draft control on this tiny tractor but i'm not sure where to start...

Hi, Looking at a great deal on a used JD 4400. Wanting to know, would it be big enough to lift large square and round bales on its FEL? Its a little less HP than I intended at only 35 but its a great deal, would be excellent for getting into the tighter spots. Cheers

Sometimes while I was raking hay last week, the hour meter went blank on my John Deere 4400 compact tractor. I would appreciate any advice. Could it be caused by a blown fuse? The owner's manual is no help.

Hello all, This is my first post, I have just been surfing and reading info for the last few months this forum is great. so anyway I have a JD 4400 that I bought used recently, I want to upgrade from an old rotary to a flail mower that has hydraulics for ditch and wall mowing like the link...

Have a 4400 here with 430 loader, syncreverser trans, rear remotes (5 ports back there: one plugged that says 'To Reservoir, two looped together and two plugged), and what seems to be a factory SVC on the right fender that is cable-operated and springs back to center. The lever for the 3ph...

Hi, I have a 1999 John Deere 4400(LV4400H241993), in the winter I run a front mounted JD 5ft snow blower and Brush hog 4ft blade on the back. When I go forward, i blow snow, when i am going backward I push snow and sometimes I do both at once. Either way it keeps my half mile of driveway...

I have the opportunity to get a smokin deal on a Deere 4400. Tractor has just about 100 hours on it. Still has the original plastic on the seat. Any recommendations on where to find a loader? Any reasonable aftermarket brands? The tractor already has a loader valve. I just need the loader.

Everything else on the tractor works fine but the power steering has stopped working, any help?

I have a JD 4400 that normally cranks/fires at the touch oh of the key. Lately it will fire one day but not the next. It always turns over but not always cranks. I can hear the fuel selenoid click when the key is turned on. All help will be appreciated.

I have a John Deere 4400 which has always cranked at the touch of the key. However for the past month or so it will crank one day and not the next. When it does crank it will not recrank if you turn it off. It is usually 2 days before it will crank again. It will turn over but not fire even if...

Years ago when John Deere introduced the adjustable draft links for the 4400 they were around $200 dollars each , i priced them at my dealer the other day and one now costs a little over $500 dollars . I personally think it is ridiculous to charge that much . Is there an aftermarket draft link...

I have a 2000 JD 4400 that I recently purchased. Yesterday I used it to move some firewood and a few other mundane chores, which required me shutting down and starting up the tractor at least nine or ten times. After the work was down I shut it down and called it a night. Today I went to start...

I have an approximately fifteen year old JD 4400 that I bought used in 2002. I use it for landscaping, hauling brush and digging holes for pecan trees for my "budding" pecan orchard.

My usually trusty JD 4400 will not start. Before this problem, the tractor was running well with no apparent issues. Turning the key sometimes produces a loud click but more frequently does nothing. I have replaced the battery although with an Autocraft battery which has a 450CCA rating...

Hi guys, long time lurker first time posting. Last year I bought a 4300 with a loader. Then I started looking for a backhoe for it since I'll be building a shop soon. I ended up finding a 4400 with under 500 hours in better shape complete with a 430 loader, 48 backhoe, mid PTO, foam filled R4...

I have a 1999 JD 4400 that I parked last week in my garage, and went out this morning to use it. And, I have a no start situation. The battery checks out ok, I wrapped the starter a few times thinking its a wore out spot in it and still no luck. Could it be a relay? I turn the key and the...

Rear pto lock indicator light will not go out. Tractor won't start. PTO wasn't locked when problem first popped up. Was told to jiggle the lever so I did. Now it IS locked. Been told the safety switch might be bad. Where is it located in relation to pro lever linkage? Can it be tested for...

After attaching box tiller for 1st time this season, it ran fine for the 1st pass. After making tiller depth adjustment, starter won't turn over in spite of voltage going to it. Can hear it click when I turn key to 1st position. PTO indicator is ON on dashboard and lever is OFF...

Just attached a new box tiller. Test drove it and all was good. Came back to adjust depth. Now the PTO indicator light won't go out when you turn the key and it won't turn over. PTO lever is in OFF position and voltage to starter is good. It just won't turn over. Wondering if PTO safety...

Hello! I have a 2001 John Deere 4400 hst. Engine sounds great, fluid is at the right levels. When I run it, plenty of power to 430 FEL and 48 backhoe. On occasion, after I step off it for a couple of minutes, I will step on the forward pedal and it will move 3-5 feet but immediately bog down to...

HI, Looking at a JD 4400 Hydro with a Curtis Cab, heater and a JD 48 Backhoe. The tractor is owned by a small landowner and meter shows 330 hours. Asking price is $18,500. Tractor house has a few without the cab and BH for around $14,000 does the BH and cab add $4500? Noticed some slop in the...

It cranks fine and runs on ether (Ugh! It sounds bad!)! I checked the fuel filter(clean!). I turned the fuel shutoff valve on-and-off and there is only a dribble for both positions. Is there a solenoid valve somewhere?

Been reading up on what appears to be a common issue for the JD4400: fuel shut-off solenoid and thermistor. Think I've isolated the problem to the thermistor. Threads I've read say it is located behind the fuse panel behind the K3 relay. Not so on mine. Where else might it be?

Hi Everyone, My JD wouldnt start a few weeks ago so I started reading threads and found out about the thermistor. I replaced it and it ran beautifully. For about a week and now its down again. I was driving it and It pretty much sounded like it ran out of fuel. Now its having the same thermistor...

Good morning everybody!!!! I have a problem with my 2000 john deere 4400 compact. My hydraulics are very weak and tractor won't move unless I turn steering wheel side to side very fast then I can drive and have lift. Any suggestions on where to start troubleshooting ??? Thank you.

After clearing out a path through some Bamboo, I was dismounting the loader for mowing the lawn. I noticed the gap between the hood and cowl was excessive. The two tabs that hold the cowl sections to the firewall frame had both cracked. I'm not sure if this is repairable, but have any of you...

I broke the ears off my 3 point on back of tractor jd4400 i am going to have to replace the axle housing....any tips on where to buy one at a bargain..and also anyone have any tips on this project...are there any hidden issues when takeing the housing off...i was told to undo all the bolts and...

I've had the tractor at the dealership for over a month while they tried to diagnose the problem but it remains. The motor seems to have good power but in all 3 gear ranges it feels like it is bogging down. There are no grinding noises or signs of heat. I thought about the transmission suction...

I have never changed this oil before. The last time JD did it. I am going to try it myself. I have all the stuff to do it but have the following questions: Should I drop the loader off? Does the gasket need cement? What did you use for all the oil to collect in. Seems like a big container...

I have a John Deere 4400 tractor and the temperature gauge is not working right. It will jump from about a 1/4 of the way to 1/2 way on the gauge in a split second and sometimes it will immediately do it a couple of times back and forth and then stay at the 1/2 way point. I have flushed the...

I am wanting to get some front weights for my JD 4400 so I can run the flail mower without the need to keep the loader fitted as ballast. The weight bracket was fitted already when I got the machine. What weights do I need for this bracket and how many? The weights I think are R66949 at 42lbs...

Im new here. And a new tractor owner 2001 JD 4400 syncreverser with 5 acres. 1400 hrs Runs good and looks good. One crack in the top of the hood. It came with a 6' blade and a MX5 rotary cutter they are only few years old. Tractor has been kept inside but I can't because ROPS to high. I have...

Is the brake light swith located under the fuel tank? brake light is on all the time

Hi I have a slight issue...the tractor starts up fine but as soon as I either engage the blades, put the tractor in gear, or put it in forward or reverse the tractor stalls out....I have jumped the seat switch to see if that was the problem and it still happens....anyone experience this???

Hello, looking for some advice. I am looking at a John Deere 4400 with a 48 backhoe and a 430 loader. Machine is a 2001 and is in mint condition. Tires in good shape as well. Seller is asking 17,000. Unfortunately, the digital hour meter is not behaving - numbers are illegible as parts of the...

I was bush hogging and my pto stopped working it is leaking a small amount of fluid anyone know what could be wrong with it? I'm new to the farming thing just bought 170 acre farm so I need all the input I can:)

Has anyone heard of this or seen this failure? I have a John Deere 4400 with about 1,200 hours with a 70" belly mower. It has only mowed a level, smooth surface it's entire life. Been babied otherwise. Yesterday as I was backing out, the left attach point for the belly mower broke free from...

I have a John Deere 4400 compact tractor hydro and the charge pump on the hydro transmission is bad,is there anywhere these can be purchased other than John Deere or where can I get one rebuilt ? Thank you

What is a used 1999 John Deere 4400 used tractor in good condition and low hours worth? Thanks in advance for any feedback/advice you can offer. Thanks

Hi, I hope this is the right forum to get an answer to a baffling situation with my 4400 compact tractor, ser. no. above. 3 times in the last month I have shut it down after running for days with no problems and then the next morning it refuses to start. It cranks over fine but wont fire. I...

hey here,i'm new here and in need of good advice.my jd 4400 has a backhoe that has been mounted for 13 years.when removed recently pto lever was froozen and rear arms are in operable.freed up pto lever but after tearing into the rockshaft it appears new.a new rockshaft control valve cost...

I have 5 acres of grass to cut. I presently have a Muratori 120cm (4ft) flail mower which is good for long grass but the finish is not that close and cutting takes a long time. I want to get a cut similar to playing field quality and have been looking at buying a rear discharge finishing mower...

Just had to replace front end differntial ring gear and pinion, shop replaced fluid with gear oil. Is this the correct fluid to be used in the in the front differntial? Thanks

Hi I looking for a 3rd SCV kit (part LVBM19694) for my JD 4400 to operate the chute on my rear mount snow blower. Any help is greatly appreciated. Thanks Scott

Folks, I have John Deree 4440 hydrostatic drive and the hydro quit working,tore tractor apart not a thing wrong with any of the gears etc. This is not the ehydro,dealership said they could not test pump unless it was in the tractor and I think they may be confusing it with the ehydro,anyway the...

My father-in-law owns a 2000 JD 4400 with 410 hours on it. It has a 420 loader attatched to it. It is gear driven, not hydro. He can no longer use his tractor due to health reasons and wants to sell it. He loves his tractor (washes it after every use) and hates to stop using it, but knows he...

Hello, Found a used JD 4400 with 2000 hours and a 72" deck very clean, looks to be well taken care of, was mainly used for grass cutting I'm told but did do some loading work as it is loader ready just doesn't come with it in the purchase. They are wanting $10,200. My concerns: Do I really...

Hi all, I'm looking for a hood for a 4400 compact utility tractor. thanks

Having a problem starting the tractor. Not hearing the click for the engine fuel shut-off solenoid engaging. Mechanic came and checked the starter and that's not the problem. He "hotwired" the starter and engine would crank but was like there was no fuel. Any suggestions? And the sooner the...

I have a 1999 JD4400 and this past weekend went out to use it (Had used it 2 days before with no problems) and the starter will only roll it over to slowly to start or the starter just rolls over once and starts clicking. So far I have done the following: - checked battery 13.68 volts on a 4...

Stopped by the dealer thursday to look at some hydraulic options for my 4300 and to look for a lawn mower. Over in the corner lot sitting there as pretty as can be was a 4400 with 840 hours with a 430 fel with a clamshell bucket and a 60 inch deck. Well I wandered over to take a look and thats...

My friends JD 4400 suddenly won't start....it cranks over O.K. but its a No-Run. He went to the local dealer for advice....they sold him a fuel filter. He said the tractor was running just fine the day before when he shut it off. I picked up a $3.50 thermistor (JD Part#LVU10323) today just...

Anyone have a schematic of the fuse panel for the 4400.

We have had several snow falls of 5 inches or so here in Northern Minnesota lately. I went out the other morning early to clear the one mile private road and discovered both headlights were burned out. I got along without them but when I finished I decided to open the front grill and take out...

Just bought a real nice 4400 JD combine and I am trying to figure out exactly what year the machine is. As I said in the title, the serial # is 300585H. It has a rotating screen for the radiator, and the reel is yellow not black. The serial # for the grain header is 318730H. I figured there...

I currently own a 4400 with a 59 inch front mounted JD snowblower. While using it recently it suddenly "jammed" and actually killed the engine. I suspected the worst but upon examination no damage to the blower, not even a sheared bolt. There was a large stone in front of the blower however...

Comparing a Kubota L3010 w/ LA482 loader & subframe mounted Woods 750 groundbreaker backhoe to a John Deere 4400 w/ a 430 loader & JD 47 backhoe Are these similar machines capability wise?

Found a 2000 JD 4400 just under 400 hrs., HST, loader, mid mower. What would be a good deal on this tractor?

Hey, Trying to add a mid PTO to my Deere 35 HP diesel tractor so I can use my deere 72" belly mower. Looking to purchase the following discontinued parts. Deere Mid PTO KIT # LVB25037 or # LVBM19542 Also need the mounting 72" Lift attaching brackets kit #BM19583 If anyone has...

Hi I have recently purchased a JD 4400 Tractor 900hrs with 300cx 4in1 loader fitted. This uses the electric button on the loader lever to operate the 4in1. When I push the lever to the right a little it opens the bucket, if I continue to push to the right it then annoyingly closers the bucket...

Hey All, I'm out of town and looking to pick up a JD 4400. My best option for getting it back home is a U-Haul Auto Transport. Will it fit? I won't be in front of the 4400 again until I pick it up. Attached is a pick of the auto transport. If you can't read the dimensions, they are 76...

Hi all, I have a 2000 John Deere 4400. I went to change the range from B to C and the shaft broke right where it goes into the case. I took the seat off to see how I could get to it. It looks like if I pull the rockshaft / top cover off, will I be able to get to the shaft that changes the...

HI, My 2000 4400 has weak power steering at lower RPMs. Its ok at higher RPMs. I've read that there has been a lot of power steering problems with this model of tractor. I was wondering if any of you have had any success in fixing this problem and could share some insights with me. A second...

I'm new here to this forum I am interested in knowing if anyone has had problems with the transmission range selector on a 4400 hydro and if there is a recall on it possibly?

Hi, I have a 2002 JD 4400 compact tractor (40hp) that won't start. Initially, I had to jump it to start but then replaced the battery. Seemed to work fine after that for a couple of weeks. Now won't start again even with a jump. When I turn the key, I get panel lights but no click or turn...

I haven't looked it up or anything, but I have lost the suspension in my seat of my 4400 deere compact tractor. I will dig into it later but looking for some suggestions, or a picture, etc. Thanks Its a 1999 model

I am looking at this tractor to replace my current 790. I had posted a while back about a 2001 4600 but I beleive that one has sold already. I have a couple who is going to the bank today to try to get financing for my 790 so hopefully it will all work out and be sold soon. So anyways, back...

I have spent the last year researching just about every new tractor out there. But thanks to the communist we have in the white house now I am considering buying used. I have realized with only 15acres I can probably buy used and save myself a lot of money. My local JD dealer has a 2001 4400...

I have a John Deere 4400 hydrostatic 4x4 very good condition with only 100 hours, turf tires loader ready. whats it worth??

Just trailered my tractor home last night and this morning I went to drive it off the trailer and it won't start. It spins over just fine, so I assuming something fuel related, any ideas on where to start? The seat switch clicks, etc when pressed.

I have a small fuel leak coming from my tractor. It is on the right side of the tractor and is not coming from the fuel filter. Would it be comeing from the injector lines and what is entailed to getting there (i have a jodale perry cab). Looks like I might have to remove the fuel tank, etc...

I'm looking to puchase the plastic fenders for my 4400. They are starting to crack around the bolt holes and was wondering if there are some out their? Thanks

My Three point quit operating tonight, Will take a look at it in the morning to see if there is anything simplelike the lever unhooked. Any suggestions on what to look for? The loader works fine. Three point is locked in the up position and would not drop down with a heavy disc on it. I...

I have come across a 4400 locally with 500 hrs, a 420 loader and titan tires. Would go for around 15k cdn$. I think it my be a little big for what I need being 400lbs heavier than a 770 I am also considering. The 4400 would be comparable in price after putting new r4's or turfs on the 770. This...

Although I can lift my 430 loader and I can tip a trailer does anyone have any idea why I cant lift my swinging arms? and another question Where do the 4 coupling hoses for a AMV8 leaf sucker go if I have only 2 connection points?? I'm stuck:confused:

I have a 1999 John Deere 4400 tractor and the starter is getting electricity but is not spinning over the tractor. I can hear it click when I turn the key but nothing happens. All battery connections are good and clean and tight. Is there a relay somewhere that goes bad. It worked good...

I have a new JD 4400 tractor. The brakes hang up and the pedal is very stiff. I've done car brakes before, but never heard of wet disc brakes before. Does anyone have any experience here they would be willing to share? Thanks.

I am about to purchase the above tractor. It has 793 hours on it and the only wrong with it that I can tell is that the gear shifter is very stiff, and it won't shift into the gears by pulling back. It hits the housing around it before the gears engage. You can shift into the forward gears...

I bought a 4400 with the mid-mount hydraulic kit parts in a box with no installation instructions. I believe the kit number is BM19583 or others have referred to it as a hydraulic kit 1000. I've got the instructions for the actual hydraulics and operating controls but not the brackets and lift...

My Oil cooler fell victim to the battery acid/fumes corrosion and sprung a leak. The free replacement from John Deere ended in 2003 under there fix as fails program. Just curious if anyone else still had luck getting a free replacement after that date. Thanks

I'm a long time lurker and new poster and could use some advice. I have decided I want a backhoe for my 4400 and have found a JD 48 BH with "the mounting kit for a 4400" included. I have researched this site and the JD parts catalog to the best of my abilities and I am confused as to...

I am still getting used to my new used Deere 4400 and am having trouble with the PTO. I am in shopping for an owners manual right now. My question is when I turn the PTO on both the mid shaft and the rear are turning. I am assuming if I push down on the round knob that will disengage the mid...

I found a listing for a Power Beyond Kit for my John Deere 4400 online. It is the old kit, not the newer design. It seems these kits are getting harder to find - should I get this or should I hold off to try to find the newer one? I am not sure if the changes that were made make the newer kit...

I just picked up a 4400 compact tractor with a cab and am thinking about putting a midmount deck on it. I have found a 60 inch deck and mounting bracket for it and have it on hold. My question is, I don't have the 3rd remote hydraulic for it. Can I put a splitter on the loader hydraulics...

I have been lookinat a used JD 4400. I believe it to be a 1999 model. It has mid mount hyd. mid pto and a rear remote. There are about 1000 hours on it and the owner is asking 12,000 for it, what do ya's think

Any recommendations or warnings? thanks a lot Dave

I'm about to purchase a "looks like new" 4400 and would appreciate any comments pro/con regarding this tractor and the "heavy duty" 430 FEL... Also, if anyone has a backhoe which fits that tractor - what is it and how do you like it? Or recommendations for a hoe? Thanks a lot, Dave

Would anyone mind telling me what the fair market value would be on the following ? Thanks.....:) I have a 1999 model John Deere 4400 hydro/old style front axle with a 4 in 1 loader/bucket,Buck Top canopy and R-1 tires left than 50% tread on the front and about 50% on the back I also have...

Is a 4400 big enough to effectively pull a 5 ft disk harrow and a 5 ft bush hog? I need a quick answer because my uncle wants to go buy one in the morning.

My JD 4400 is very hard to start at times,a few years ago while under warranty the dealer replaced the ( spelling ? ) thermistor and it solved the hard starting problem. My question is,where on the tractor exactly is the thermistor located at ?? What would the part number be ??? I think it may...

In looking for a tractor in the 30-40 hp range I have come across a used Deere 4400 but can't find out very much about them. Primary use will be running a chipper and FEL lifting. The older 1070 with a bit more hp actually has higher asking prices, in spite of it's age. Any drawbacks to the...

I'm looking at a JD4400 and the guy wants 14.9K. Here is what the deal is. - 2001 JD4400 Hydro w/under 400 hours - Brand New 300x loader w/bucket - 72" mower deck w/3rd SCV - Brand new turf tires and rims - Brand new Lienbach post hole digger w/9" auger Over all the tractor looks to be in well...

jdown-ML-813914-ML- John Deere specific post.

Anyone know where I could pick up a used or aftermarket pinion gear for a John Deere 4400 hydro ?? I need one and John Deere parts wants $800 for a new one with a ring gear,they will not sell seperate.Post here or IM me either way if you can help. I would appreciate any help. Thank you very much.

Is there much of a difference between these two models? I'm told that the 4410 is the older version of the 3520. I can find lots information on the 4410 but not much on the 4400. Did JD just rename its lineup or is the 4400 really different from the 4410? While you are at it, it you have...

I lost out on the last two used machines that came available that were within my budget. I have two new prospects and I will need to move fast so your input is appreciated. 1. 2000 JD 4400 - 583hrs, no rear remotes, hydro transmission. Turf tires but dealer will swap them with industrials...

My steering quit working on the JD 4400,so I called John Deere and it was about $700 to replace. JD does not offer a rebuild kit,so I dissected the cylinder and the o ring in the center of the cylinder is has worn on one side from where I had slightly bent the shaft.The inside of the cylinder...

John deere 4400 and 1300 hours Last Saturday I started my vacation,I thought great I will get some work done on my tractor,well I was hoping for quality seat time,but it ended up being wrench time. I am in the woods grading my road and I hear a peculiar noise...well the splined collar is...

My Bro in-law would like to sell me his 4400. It is mid 1990's with about 750 hours. It has a loader and quick hitch but no mower. My questions....Is this a good utility tractor? Can you get a MMM for this machine? I am not interested in a 3-point mower for my yard. I currently have a 2210...

ARE THE specs on a JD 4410 similar to a a JD 4400, can anyone give me the basic specs on it? hp, pto hp etc. need it for a friend.TIA

My JD 4400 steering is acting weird,normally when you turn the steering wheel all of the way left or right the steering wheel will stop,yesterday when operating my tractor I noticed when turning to the right I could keep turning the steering wheel continously to the right ( right only). The...

I was brush hogging on a bank yesterday ,I would back down the bank and drive back up because the bank was too steep to mow any other way. While I was mowing I momentarily heard a noise and then never heard anything else out of the ordinary. I continue mowing and I noticed my 4wd was not...

How many years is it likely that parts would be available for my JD 4400 ???

Cracked/split my hood on my JD 4400...no problem applied the JB weld,let it set overnight and sanded down,sprayed with JD green paint...looks good as new. JB weld is handy stuff. Almost as handy as WD-40. JB Weld !!

Do any members own the 4400 or can anyone comment on its reliability. There is one listed on eBay here that seems like a great deal, and being in the next state it wouldn't be out of the question to pull a trailer over there to pick it up. What's your opinion on the value of this tractor (2001...

I have a 4 year old JD 4400 worked fine last summer with the mid mount mower. Back in october I remove the mower and installed the front mount snowblower. We just got 12" of snow today and went to use the snowblower. Shortly after I began to use the blower the lever that controls the front/rear...

I have had a JD 4400 for over 4 years now. I use the heck out of it and I have had some problems as well. I fix the thing and I go on.The tractor has 1116 hours on the clock. The safety switch under the seat has failed. 1 fan belt replaced under warranty. I have bent and replaced the lower lift...

I was using my Franguard skidder winch and I snagged the top of a culvert in the mud and it broke the piece off of the axle housing where the lift arm is attatched to the housing.I had to remove the wheel and axle and buy a new axle housing. The one on the other side has a crack in it and shows...

I am in the process of working on my JD 4400 and had to replace a bearing on my PTO shaft and stamped right on the bearing,it says "Russia".

In a post by lgjhn, he mentions that he replaced the battery in his 4300 with a Optima yellow top battery. He said it was a 51D but that is not a model listed on Optima's web site. I purchased a 31D but it is too deep for the battery tray and will not allow the grill to be replaced completely...

Saw in the local paper tonight. JD 4400 w/FEL for $14000. Said it was a 2002. Can anyone make any educated guesses on what features it has. It said nothing about hydro and had 175 hours on it. Under what circumstances could this be considered a good deal? I may call tomorrow and get more...

Hi, I recently acquired a JD 4400 and it smokes a lot and is sluggish. I added fuel injector cleaner and this has not helped as of yet. I think something may be wrong with the injectors,does anyone know of a good cleaner for the injectors ? Are the injectors hard to replace ?

I was running my JD 4400 today and had been running it for about 2 hours at about 2400 RPM's. I was doing some dirt moving with the back blade. My tractor has 838 hours on it and I have put all of the hours on it so I am quite familiar with the usual characteristics of my tractor,while operating...

I have a draw bar on my tractor,any good ideas/easy solution how to drag logs and lift the ends up off the ground so the tractor is carrying the end of the log instead of dragging it,instead of having the end dig into the dirt while pulling the log?

While brushhogging yesterday I disengaged the PTO and the PTO run light stays on,I engage it and disengage and the light still stays on.I realize I better get to the house,if this thing stalls on me I will never get it started with the tractor thinking the PTO is engaged.I go to the house and...

Can anybody tell me the size difference between the Deere 4400 and the Kubota L3130? A neighbor has the JD 4400 and I'm curious as to its size relative to the Kubota. I can't find any specs on the 4400 on the Deere website. As usual thank you in advance.

Glad I had my seat belt and ROP up. I was working my garden up,I had a potato plow on and my loader on.The tractor was wanting to pull down hill a little in the loose dirt,so I raised the bucket a little to allow the back wheels to have a little more traction (and using my brakes to help steer)...

Well, we are finally getting close to buying a CUT to go along with our new home and property (some pasture, mostly woods we need to clear). I love the new 4x10 series or the 110 TLB, but am forced to lower my expectations as the home we want is sucking all the funds from the construction loan...

tractor has 470 hours on it....what should it be worth on trade in?

Guys, My tractor developed a serious problem this past Tuesday and it is currently back in the shop and the dealer cannot get it to duplicate the problem[hmmm].I need your input if you have experinced a similar problem because my dealer has no clue to what might be wrong since the problem will...

I looked all over 2 citys today for an all thread or stud in a size 14 metric for my JD 4400 rear wheel bolts,what I want to do is run these clear through my wheel center and hub and and put double nuts and lockwasher on back side and nut on outside of center piece,what would be best though if I...

Well....... I bought the tractor new in June 2000. 1. About March of 2001 differental lock failed and tractor would not start about 50/50 of the time,and bolt came off 1 common break pedal on the right side (hydro) dealer comes and gets the tractor,end up replacing hydro tranny,new differental...

Hi, does anyone know the OEM brand of the 8.50X14 R1 tires that come standard on the 4400 4wd JD tractors. many thanks, keoke

Hello again, I have a JD4400 and I was thinking about getting a bucket (end loader) for the tractor,I would want a heavy duty bucket since I will be in a lot of stones etc. Does anyone have any suggestions/advice? Also what should I excpect to pay?I do not have any hydraulics,all of this will...

Has any one ever had trouble keeping the rear wheel bolts tight on the 4000 series?I noticed yesterday on one side mine were starting to backout of the rim and when the wheels were installed last year they were tightened substantially when installed. Thanks in advance Scott

I have a used JD4400 on hold at my local Massey dealer. He picked it up from a JD dealer. He said the unit is two years old and it just came off lease. The tractor did not have a loader and was used for mowing with a 3pt mower. The Massey dealer added a brand new 430 loader to it and is offering...

My JD 4400 takes a spell every now and then and is very hard to start,last spring my dealer put a new fuel pump on it because it would not start at all.Well despite even having a new fuel pump, on occasion it is very difficult to start. I will turn the key and it might fire for a second and then...

I found a 1999 4400 with 1200 hours for $13,500. Is this a good price? JMS77

Hey everyone, I just became a member. I am about to take that giant leep, and I need help. I own 15 acres and need a tractor that will help me keep the weeds down, till the large garden, maintain the fences (post hole digger), and build and maintain a decent motocross track. Following is what...

I'm wondering about buying a JD4400 w/ 1000 hours on it (apparently those weren't abusive hours.) Is 1000 hours a lot? Will it likely need major repairs right away? I will not be putting a lot of hours on it, mainly for mowing, front-end-loading, etc., around our place. Would it be better to...

After reading some of the posts about potential problems with acid leaking from the battery of the 4000 series tractors, I thought I'd just head off any trouble and put a maintenance free battery in my new 4400. Took measurements from the existing battery and went all over town today. Cannot...

Tire question for JD 4400 \"help\" Is there a tire that is made, that has the R-1 agriculture tread that can be purchased to fit my R-4 industrial rims,I am in a dilema that as far as I know to make this change from R-4 tread design to R-1 tread design,to make this change I would need to buy...

Would anyone know what the price would be on new R-1 tires and rims for my JD 4400?

Well, my local dealer prepared a JD4400 with front end loader, 60 inch belly mower and a JD 50 inch tiller. My wife and I went to the dealership prior to delivery and the size of the set-up sent us running. I have a real dilemma developing here. Stalled the dealer, Im not sure Im doing the right...

Ive been reading the posts since I found your site. I am very close to finalizing a deal on a JD 4400 with 4X4 Hydro Front end loader,mid mower, and JD tiller...50 inch. I've E-Mailed Carver Equipment twice asking for info that will sway my decision. My local Kubota dealer just doesnt make me...