john deere 4010

I have a John Deere 4010 (field tractor), with a gas engine. I am having issues with getting it to run. I MAY have run it out of fuel (I personally don't think I ran it dry, but may have) It acted like it was out of fuel, would not start when fuel added. Changed fuel filter, good to go, ran...

Greetings I have a 20 year old 4010 compact tractor, reasonably good shape has been serviced regularly. I noticed this past year the FEL doesn't seem as strong, the power steering, once in a great while, will cut out and won't move. Yesterday the FEL just flat quit raising when I was lifting...

Will a 120E or a 120R fit on my 4010 Compact Utility Tractor?

Where does white wire with inline fuze connected to silinoid connect to ignition switch

Where does white wire with inline fuse connect to ignition switch

What is the best 24 volt to 12 volt conversion kit for a 1963 Deere 4010 diesel? I intend to use 1 group 31 battery. Mounted by the starter. I need a new battery box anyway.

I'm in the process of tearing down and going through my 4010. I have a long list of items that need attention and while it's apart it will be getting blasted and repainted while apart. I'm to the point where I am ready to pull the engine off and wondering how much it actually weighs. I've...

I have been working with a friend on his JD 4010 for many weeks to get this tractor running after it has been sitting for five years. We have changed so much on the tractor including the plugs, their cables, points, distributor rotor and cap. Reset the ignition timing changed the coil, the...

I'm wanting to add a factory 3pt hitch to my 1963 john deere 4010 diesel. Looking for sources for a non running 4010 with factory 3pt hitch that is in good shape Also advice on what challenges I may run into. Thanks

1963 4010 diesel Starter Solenoid 24 volt system Now the starter is just clicking when you go to start the tractor. It starts if you hit it a 2nd or 3rd time. $ hits of the key is the most it has taken so far. The tractor starts as soon as the starter turns. To me it acts like a solenoid...

Hi All, I'm new to TBN and this is my first post although I have spent many hours lurking before I decided to register. This forum is a great resource. Thank you all for your contributions! A little history... A friend just bought a JD 4010 diesel basket case tractor that has passed through a...

1963 John Deere 4010 Diesel wide front, 24 volt What is this by the ignition switch with the yellow wire going to it? Is this a fuse holder for the lights?

I JUST CHANGED THE TRANSMISSION / hYDRAULIC fluid in the 1963 John Deere 4010 Diesel Syncro transmission. I used a John Deere filter and cleaned the screen behind the square plug. When I started it after adding 10 gallons , it was squealing and the 3 point was jerky. I shut it off and added...

I am Looking for torque specs 1963 John Deere 4010 oil plug and filter housing I am terrible about tightening things by feel. In my younger day I would break off 3/8 bolts without ever noticing they got tight. I have absolutely no feel for to tight, just right or loose. I thought I posted...

Where do I find a rebuild kit for a 1963 John Deere 4010 Syncro-range shifter? Or do I need to order each part by itself? Where do I find a good schematic with part numbers? Are there any good tutorials for tearing into one of these? I have a couple of gears that do not seem to play nice. I...

Hi All, I'm a tractor newbie and I know very little about hydraulics. I just had a Dual 3000 put on my 4010 (gas) and the hydraulics are too weak to do much with the loader. The bucket goes up slowly and now the 3 point won't lift a bale without engaging one of the bucket levers. What can I do...

The diesel engine won't rev up, stars hard and dies when at idle. I pulled the pump and found the metering valve stuck and there had been water in the fuel. I got the valve unstuck after using penetrating oil. The spring on the valve linkage is rusty and I took it out. when I did this the spring...

Hay maker with 1955 oliver and jd 4010 gas....................4010 gas starts in summer........has block heater and still won't start well in winter...any ideas out there? Cranks over good...2 battery 12v system.strong batteries....hot msd coil...clean plugs....tractor has front end loader forks...

Has anybody used Pats quick hitch on a JD 4010 or similar tractor? I just bought a Hardee ditchbank cutter and its not set up to accept a standard quick hitch. Its awfully tight in there to hook the arms up and any kind of quick hitch would make life alot less frustrating. Its a Cat 2 hook...

My front loader and my 3 point hitch will not lift as heavy a load as it used to; I hear a strain like a clutch slipping, etc. Any ideas as what to check? This is my first tractor and this one has really saved my back, as I am older than dirt. Thanks.

I am working on a 4010 with steering issues. The steering valve plate cracked. After replacing the plate, and "butterflys" the tractor has no steering. Need help on the next steps before I pull the pump and recheck for debris.

I had my dealer quote loader mounts for my 4010 (410 loader) and it was a little over 600 bucks, does this sound right? Are there good places to look for used ones? I realize once they are on a tractor they usually stay with the tractor and/or loader. I don't own, but have access to a 410...

After moving a zillion tons of snow yesterday (Sat) after Blizzard. Parked my JD 4010 compact in its unheated shed. Temp. went down to 9 degrees. This AM (Sun) turning the ignition key produced a slight click. All the dash lights go on and the headlight come on and DO NOT dim when I try to...

I have a 4010 that sat for about 10 years. the only thing wrong with it at the time was the points and the plugs. When I finally got around to it, i had to have the carb and tank cleaned. the fuel like was plugged up until i blew it out. I replaced the points and put in a new coil. I bought new...

have cleaned and changed filter all lines and pumps .understand there is aflow regulator or selinoid looking for any suggestions dont want to just by parts any help would be appreciated. thanks

I had a hydraulic leak on my 4010 between the control levers and under the steering wheel counsel and next to the gearbox. I loosened several hydraulic lines, including one small 12 inch long line directly under the steering gearbox. Since doing this, the throttle lever has lost it's resistance...

I am purchasing a Fasse Valve with a elect switch today I need help with installation does it need a bracket and what does it look like because im a woman sometimes im sold stuff i really dont need. do i need tips and couplers too I have a John Deere 4010 tractor and it has two ports i want to...

I have a tractor my great grandfather bought new in December of 1960. I am not sure if it was a 1960 or a 1961 model but it is a JD 4010 gas. It had set for about 10 years before i started tinkering with the old gal. I installed new plugs points condenser cap and coil. I also had the gas tank...

Howdy, We are looking at buying an LP JD 4010, but would want to find a wide front end for it as well as an ROP or cab before doing so. Any help you folks could give in locating those items would be greatly appreciated. Or we would be interested in a good 4010 already equipped like this, but...

Injection pump repair. Has anyone done this?

Just had a local mechanic install my 2 spool prince valve on my 1962 John Deere 4010. After a week of being home and not even an hr of use when trying to raise the loader without any weight it began pulsating and chattering as it is going up. The loader also goes up slowly will it's doing this...

Hello I am new to this site. and I am hoping that someone can help me out. I just bought a 2004 john deere 4010 compact at an auction. I replaced fuel shutoff solenoid and it still didn't start, i toke solenoid off and tractor fires up no problem. I don't have power to the solenoid, I checked...

What type of antifreeze should I put in my John Deere (early 60's model) 4010

Just curious as to what this is for on my 4010. I've looked all over the Internet with no luck. It appears that something threads onto this part that I have attached pictures of. Any help would be appreciated. The part I'm curious about is to the right of the lever that engages the pto.

my dad and i picked up a ('62 i think) 4010 diesel for a good price to fix up and maybe sell, its more or less all original, but well used. my dad thinks this one is rare because it has from the factory, no rockshaft unit(no 3 point hich). it has dual remotes, oil bath filter, originally wide...

Hello.. My Dad said he would sell the 1962 John Deere 4010D which he has dad since 1963.. I said that I would like first bid on the tractor and he said OK.. So I donot own it yet. I first drove this tractor the first day he got it when I was 11 years old and have already spent many-many...

Well I finally found a John Deere tractor that was in my budget, runs good, and in pretty good condition. I'm going to pick up this 4010 tomorrow if I can get off work at a decent time. My question now is how difficult will it be to add a front end loader to this tractor? I've already found a...

Just bought a JD 4010 Compact Tractor and have figured out most controls. But is the 4wd a full time feature if not how do you shift in and out of 4wd?

Looking for a good used John Deere 4010 in the central US. Interested in condition more than price.

Please fill me in on this unit. I'm about to take a look at it asking Price is 11,500. With, Finish 5', FEl, harrow, auger. 200hrs. should drive out to look at it 2moro.

I found 2005 JD4010 HST, FEL, 48"fm,PHD,BB asking $10,800 what do you think? it has 180hrs :o? ;)? :mad:?

I have a John Deere 4010 with a Roosa-Master Injection Pump. This pump has the governer built into the unit and the governer has broken apart and plugged the return line. After I clean out the return line, the engine runs fine again for awhile. My question is . . . Can the governer assembly be...

The JD dealer just picked up my tractor a few minutes ago. Saturday morning I was running the 4' KK tiller and enjoying a fine morning of seat time. All was well until everything but the engine suddenly stopped. I had no hydraulic power to anything, including the hydrostatic transmission...

Hello, Is $10K a good price for a 4010, 47" snowblower, and 54" mower? The tractor has 70 hours on it. Not sure if it is a hydro. I'm asking for a friend. Thanks

I'm going to put up a shed for my soon to arrive 4010, but I don't know how long to make it. Could someone give me the approximate length of the 4010 with a fel and box blade? Does not have to be exact, just within a foot or so. In fact, I'll probably build the shed 4-6 feet longer in case I...

I saw my first 4010 next to a 2305 at the local big JD ag dealer. I was quite impressed with the 4010, seemed more "industrial" less residential in size, tires, loader, tiller, at least how that particular one was spec'd. The 2305 was also very nice. I never even considered the 4000 series as...

Which is better B7510, JD2210, JD4010 or CK20?

They delivered my JD 4010 with 410 loader and LX4 cutter this afternoon. The guy showed me most things and answered all my questions. Then I went back and tossed some mulch with the loader before heading down to cut grass on some trails. The cutter isn't as smooth as the one on the Gravely...

John Deere 4010 54\" front blade I have not been able to attach the 54" front blade to the hanger that came with my 4010 tractor. I have two attachments a 54" mid mount mower and a 54" front blade. The mower is easly installed but the bracket for the blade does not have the correct holes for...

The 4010 has 14 HP at the PTO. Is that enough HP to use a brush hog on 3 ft. high weeds and 1 inch sampling while mowing on hilly land ?

I know I do not have the most hours on,I have had my John Deere 4400 for 3 years and I have 650 hous on mine,mine has not been without some problems but I am quite happy overall. How many hours do you have on yours?Have you been satisfied with your tractor?

I've been watching the board for a few months now, and really appreciate the help I've received so far. I've got about 4 acres of easy mowing and have been looking at both the JD4010 as well as the B7500, with either MMM or RFM. I like the 4010, but the local dealer I think is high...$10,850...

I've been reading TBN for the past couple of months and I am impressed by the amount of useful information that is contained here. Like so many others before me I have finally convinced my wife that I need a tractor and she has agreed. Now it seems like the hardest decision is deciding what to...

I have narrowed it down to these. They are the "same" price around here and just can't make up my mind. I am getting it with a FEL and MMM. The JD dealer is pushing the 4010 but I like the size of the 2210/2200 better. I have 2 lots. 1 is lawn, 2 is field both totaling 5 acres. The only reason I...

My local JD dealer just ordered my new 4010. Should be here in 3 weeks. He told me that I would have no problem using the 4ft Howse cutter with the 14hp PTO on the 4010. But, after reading some of these posts, I'm now wondering if I should move up to the 4110. What do you guys think ...

I wonder if John Deere will ever offer a factory installed cab for the 4010 series with A/C like Kubota offers for there compacts ?

I have driven several JD model compacts and like the 4010 and 4110 for size and price. I have priced the following configurations from a local dealer. The configuration is as follows: 4010 - $11,645 (18.5 HP, HST) 60" belly mower 48" LX4 rotary cutter with slip clutch Hydraulics for future...

Any 4010 owners out there that can share their comments on the power of this new JD?

I recently purchased a JD 4010 with a 60" MMM. The rockshaft lever drops the mower all the way to the wheels. The manual says for best mowing results to make sure the wheels don't touch. How do you adjust the mower deck height. I could just put it in my driveway and drop the deck and raise it a...

As I explore all the possibilities for a possible upgrade to a CUT from my 445 this next Fall, I'm curious about the experiences of owners of the new 4010 model. While the specs seem to portray a capable small CUT, I'm a little concerned about a few limitations that may exist. I guess I'm basing...

I'm going to buy a John Deere 4010 with HST and FEL or a Kubota B7500 with HST and FEL. I know they are both good quality machines and both dealers are in my home town. I would like to know the pro's and con's of each tractor and the preferences of the readers. The John Deere is about $300...

Rumors are flying here and on CTB about the new JD 4010 series. Supposedly it will be available sometime between this fall and next summer. Reports from leaking dealers say that there will be 75 fixes to the 4000 series, possibly including a new hydro, improved pedals, factory T&T, quick...

I can't get a spark of any kind from the coil on this 4010 Propane tractor. I've changed the coil, condesor, points, wires and even been advised to add a 12v to 9v reducer (ceramic device) in the positive wire to the coil. All of this and still nothing from now a third coil installation! The...