ford 3930

I have the opportunity to purchase a 1994 Ford 3930 with a loader. I have brought the tractor home, and have been using it to do some bushhogging around my place. The tractor seems to run well, but need some cosmetics (a new seat and paint). The tractor is $6500 from a friend of mine. I'm...

Having watched a wonderful video on replacing the fuel injectors on a Ford tractor, see , I decided that would be my next project. Imagine my surprise when I went to swing out the battery box and realized the front-end-loader was in the way. If I take the battery out can I get to the injectors...

The right side cylinder on my Ford (New Holland) 3930 front end loader (Model 7309) has started leaking. Should I look for a re-build kit or just buy a new cylinder. Any video's on how to repair that? Thanks.

The owner's manual on my 1997 Ford 3930 (New Holland) shows a dual cylinder fuel filter. The filter on the tractor now is a single filter (SF 10082). Is one arrangement any better than the other? The dual filter has clear bowl that I assume traps water. Why wouldn't the single filter need...

I've had a early/mid-90's Ford 3930 for years, and never had any issues with the tractor...until several months back. Went through multiple episodes of sluggish acceleration/low power, ultimately figured out I had algae growing in the diesel (clogging the fuel petcock and injector pump inlet...

I've run into an odd issue with a Ford 3930 3cyl. We've had the tractor close to 10 yrs, and never had an issue until a couple weeks ago. While bushhogging, it started choking down a bit...and acted like it was running on half throttle. I assumed the filter was clogged, so I pulled it..looked...

I recently picked up a Bush Hog 2400 QT front end loader assembly, and the plan is to mount it on a Ford 3930. The loader assembly came off a Deutz, so I will have to fabricate up the side mounts for the rear of the loader...shouldn't be too much of a problem. What I am not sure about is the...

My Ford 3930 calls for hydraulic oil In the power steering unit. It has regular Power steering fluid in it. Are they compatible, or do I need to flush the power steering fluid out before putting the correct oil in The Reservoir?

I have a Ford 3930 that will occasionally make a grinding noise in neutral with the clutch engaged (pedal out). It doesn't make this sound every time, maybe once every 5 times I lift the clutch pedal. It doesn't seem to make the sound when in gear or with the clutch disengaged (pedal depressed)...

Injector pump and injectors need to be replaced. Does the new components need to match the existing parts numbers? Or, can you just get a pump and injectors new for that model regardless of the numbers? Thanks.

Trying again here...I can稚 find a 3930 nose body panel or cowl. The fiberglass shell that sits at the front over the radiator. It痴 different from other similar Fords and can稚 find them in the aftermarket. Please help me get my burned tractor back in the game!

I have a 1994 Ford 3930 diesel with 4000 hrs. I was having some steering problems ( hard to turn, unresponsive at times). So I changed everything Hydraulic pump, Steering motor, rebuilt the cylinder. Now it is harder to turn, like there is no assist at all from the hydraulics. Any thoughts on...

Rebuilding a burned tractor for my brother. Striking out finding a new or used nose cone/cap/cowl. There are aftermarket ones available for 3910s etc but the 3930 and 4630 cowls were different. Any lead appreciated.

i'm having trouble removing the hydraulic pump on my 1995 ford 3930. the one behind the right foot rest. I've removed the mounting bolts but it seems like something else is holding it. lightly prying on it, I can see it move a little on the two dowel pins so it's not the gasket stuck. i'm...

My trusted Ford 3930 4WD caught fire the other day...total loss. I am looking to replace it but used 4WD 3930s are a lot more than the 2WD. I am wondering if I can purchase a 2WD and bolt up my 4WD components which survived the fire (front axle, driveline etc). Both my old tractor and the...

We've got a Ford 3930 MFWA that seems to be leaking engine oil from the back of the oil pan. I figured it probably needs a new gasket. We just recently acquired this tractor about a year ago. It's got around ~600 hours but has spent most of it's life outside. Replacing the gasket seems...

Since the fall my 1992 (I believe) Ford 3930 has been having some starting issues. The starter seemed to getting a little noisy but it would still start. Occasionally I would turn the key and it wouldn't do a thing, not even click. A few taps on the starter with a hammer and it would go. It...

I have a Ford 3930 that is having the fuel solenoid issue. It is not getting enough power to allow the tractor to start. I ran a cable straight from the battery to the switch and it will start but at that point it will not go into gear. I am assuming that is some sort of safety mechanism that...

Tractor starts out fine, but as it warms up the power steering begins to fade and eventually quits. Changing the filter and flushing made no difference. Steering will work approx. 45 minutes before begins to fade. Any ideas to correct the problem??????

I'm trying to see if anyone know about or has a manual to the Ford 3930. The PTO when out and no longer runs. I can freely turn the shaft by hand. Turning on the PTO gives no revolutions at all. Loader works fine. Anything to check first? Is everything accessible through the rockshaft cover or...

I have a 92 Ford 3930 2wd with the manual speed transmission. I have a leak coming out of the bottom of the cover plate that the PTO shaft comes out of. I've removed the bolts and when I start to pull the cover off the shaft comes with it. I've read about how on some models a bearing will...

An 87 year old friend had a flasher issue with his 3930 tractor. I fixed it and in the process, I noticed the 25amp fuse for the thermostart was missing. I put a new in. Is there a dash light or some other way to see, if this is working without finding it under the hood? His fuel gauge does...

I have an early 90s Ford 3930 2wd. It has an Allied 394 loader with a 2 spool valve. I wanted to add a rear remote so I purchased a BLB BM70-3 valve and installed it on the tractor. After installation my loader arms would only go about as high as the top of the hood and the bucket would move...

The clutch on my 93 Ford 3930 is to the point where the pedal is almost all the way to the top before it engages. It doesn't seem like it's slipping but I haven't really tried pulling anything that would cause it to. What I have noticed is when I'm starting out in reverse high range it seems...

Can you swap out the fuel guage on a Ford 3930 without having to change out the entire instrument cluster? I'm finding plenty of clusters for sale on one but no single fuel guages. I checked the sending unit and at the current fuel level (about half a tank) I read 225 ohms resistance across...

Does anyone have any experience on what is involve in rebuilding the hydraulic selector valve on this tractor? I'm talking about the valve in front of the seat that switches the hydraulic from locked out (forward) to 3 point hitch (centre) to loader (rear). I think I'm having some issues with...

Does anyone know the inlet size I need for a muffler on the 3930? Thanks!

I have a 3930 with about 680 hours. I had a problem with mice chewing the wires to the instrument panel. I put the wires back together with splices and was able to get the tractor running again, although I still don't have it completely right as the gauges aren't working correctly. However, it...

I am now on my third engine for my 1993 Ford 3930 45 HP Diesel Tractor. After 86 hours on the third engine my engine just blew some valves and a head gasket. Its pretty well finished. I have had to deal with a bunch of inequitable dealers. I leased this tractor for 9200 and have paid 6200...

I was over at a friends today that has a 1999 2WD Ford 3930 and he needs to replace the oil pan because he hit a stump. He was told the pan was $248 and the gasket is $40. My knowledge of Fords is very limited, but is the part he needs? If wrong can you point me in the correct direction...

I have a 1993 Ford 3930 with an Allied 394 FEL. According to the loader specs it should lift 1500 pounds. Mine seems to be maxed out at what I would say is about 1000 (6x6 round bale). It doesn't scream or whine, it just stops lifting. My loader is plumbed through the rear remove. Moving...

I have a 1993 Ford 3930 2wd that I've had for a little over a year. I love the tractor but it's super wide in the back because it looks like a previous owner put shorter wider wheels/tires on it. It's currently running 16.9x24 rear tires. I believe stock is 13.6x28. With the current set up...

There are 4 short hydraulic hoses in the joytick controller for my front end loader on my Ford 3930. One of them split. Can I find replacement hoses for inside the controller or will I have to buy a new controller? Where would you look for those kinds of parts? Thanks.

I have a Ford 3930 and the starter won't turn over. I replaced the battery. The old one was going dead but the new one is fully charged and the starter still won't turn over. The past weekend it would turn over and then other times it would just click when I turned the key. this was with the old...

I have a 1993 Ford 3930 with one of those high stack muffler that extends directly up. The problem is that when I try to mow around trees or go thru bushes and it hits a large branch the muffler unit gets bent. Prior to owning a Ford 3930 I owned a Ford 3000 and the muffler system went down by...

Hi Guys, New member, first post. I've used this site a lot when researching various things. I finally got around to signing up. I have a 1990s (93 I think) Ford 3930 with a manual transmission. It's been working great all winter. I last used it a few days ago and no problems at all...

Just got a replacement engine for my Ford 3930 and it is running fine. The problem is this was the first time I bushhoged with it today. When I started I could get it into gear and the clutch worked fine but after about 1 hour of use I would put the clutch down to floor and it would just stick...

Can anyone tell me if a 7108 loader can be mounted on a Ford 3930

Hey everybody, We bought a 94 3930 tractor in Oct. 2013 and it has been great for the most part. It has a Woods loader on the front of it and we are using the rear lift now to roll out hay for the cows with the hay unroller. Our issue is that the lift arms will not hold the hay unroller up...

Anyone know where I can get a Used Ford 7209 Front End Loader for a Ford 3930 2WD Diesel Tractor?

I have been looking at a used NEW HOLLAND 270TL Front End Loader for my 1993 Ford 3930 Tractor. Can anyone tell me if that will fit a Ford 3930

the 3930 has a rear remote, the loader runs off the remote. The remote valve is mounted on top of the transmission, just below the seat. Is anyone familiar with this tractor and can tell me how to run the loader without connecting to the remotes? I want to use the remote for the hydraulic top link.

I'm thinking about a '93 model 3930, but it is 4 hours from me. It has the 8x8 trans and am wondering if the forward/reverse shift is synchronized. Is the 8x8 relatively trouble-free? I see that there is an optional high flow hydraulic system. Can that be verified externally? Looking on line...

I don't know if this should go in this section or in hydraulics, but would like to know what is involved in adding a hydraulic remote to a '93 model 3930. I'm handy with a wrench and if it can be a bolt on operation I can probably handle it. Approximate cost of parts and a source would be great...

Hi I am a farmer from Saskatchewan and recently purchased a 1992 Ford 3930 yard tractor. I look forward to others comments on this and other subjects regarding tractors

Default Ford 3930 is leaking out of the exhaust I just bought 1993 45 HP Ford 3930. It runs on Diesel. I paid about 5950. I had it delivered and am having another Dealer check it out. I just got a call from the dealer I brought it to and he is telling me there is oil leaking out of the...

I just bought 1993 45 HP Ford 3930. It runs on Diesel. I paid about 5950. I had it delivered and am having another Dealer check it out. I just got a call from the dealer I brought it to and he is telling me there is oil leaking out of the exhaust. This was after letting it run three hours...

I have a mid 90's ('95 I believe) Ford 3930, and I'm having an issue with the instrument cluster. Rats at some point got in behind the cluster, and have made a mess of the wiring. I've been able to get most of the wiring back together, but there are still a few wires that I haven't been able...

I have a mid 90's Ford 3930, and has developed a couple of issues. First is a problem with steering at lower RPMs, which I have narrowed down to a low/almost empty PS pump reservoir. Any particular fluid I need to run in the Ford for the power steering? Will universal tractor fluid be...

Hey everybody, We bought a 94 3930 Diesel Ford back in September or October of last year. I felt it needed a clutch but my dad didn't think so, but we went ahead and decided to split and see. It still had some life but since we had it this far, we decided to go ahead and replace it. I guess...

Hello, Long time stalker, first time poster. Hope someone can help me track down my 2 electrical issues. I have a 97 Ford 3930 that I picked up about 4 months ago. First, When the tractor is running, My fuel gauge works and my temperature gauge does not work when the lights off. Then when...

My 1995 3930 is almost complete. Just need to install new wiring for and safety lights on rear. Here are some pics of before,during,after.

what type of hydraulic fluid is used in a 1994 Ford 3930 and where do you put it in

I just replaced the starter solenoid on my 3930. It was making a long ccccllliiickkk (Click) before engaging the starter. All wiring put back the same, now the tractor tries to start with the kill switch out and the key off, the the starter was on a continuous whirrr until I got the battery...

I am restoring a 1995 3930 with 8x8 shuttle tranny, that has dual hydro pumps and deluxe remotes. I have tractor disassembled to paint. Remote hydraulics where strong, but 3 point lift was very weak(full rpm's barely lifts weight). I should have tested rear housing mounted pump before teardown...

My husband needs a wiring diagram for his 1994 Ford 3930 can anyone help him? Thank you for your help

Hello i just purchased a 3930 and it is now blowing smoke and leaking oil. It looks to be leaking from a spot from between the front of the tractor where the oil pan is. Just below the belt. I am very new to tractors. This is my first one. Any help would be appreciated.

When bushhogging high grass the grass tends to wrap around where the PTO connects to the bushhog. Is there some type of shield or guard that could prevent this? Thanks in advance for your help.

Need help with headlights not working need wireing diagram

what type of fluid for transmission and power steering in a Ford 3930 tractor is needed?

I have a 1996 Ford 3930 that is rapidly leaking fluid out of the reservoir, it is not an external leak. Any ideas on what the problem may be?

I removed my pto shaqft and pressed in new seal and bearings. now having trouble sliding shaft back in. stops about 4 inches of home. Any tricks to align it?

I need to replace the oil pan gasket on ford 3930 tractor, do I have to drop front axle? Help

Today when I checked the fluids all levels were OK. But, the transmission oil looked milky as if there is water in the oil. The rear end and hydraulic oil is fine. The engine oil is OK too. Coolant level is where it should be. Can anyone tell me how water can get into the trans oil or what makes...

I have a Ford 3930. I need to change the engine oil. I bought an ITT manual for information. It provides the quantities for fluids, but it does not state the correct type of oil that is required. Should it be Rotella 10W40 or something similar? I also need a filter, but assume that won't be a...

I was at a local dealer yesterday to see the New Holland tractors and on the lot they had a 1993 Ford 3930 tractor, 4 wheel drive with syncro shift and a 195 loader. The tractor was purchased new, brought home, used lightly for 74 hours and then the owner past away. All these years it sat in a...

When I got my tractor, used, 4 years ago, there was an incorrect fuel cap basically just crammed into the filler tube. Fit not bad, for what it was, but was one of the first things I replaced with an OE fuel cap (exterior thread on fill tube). Noticed a little while ago that the OE...

The power steering on my 3930 seems slow when the motor is near idle. Is that typical or indicative of a potential problem? Can you tell me how to check the power steering fluid on a Ford 3930? Does it have a separate power steering fluid or does it use the same hydraulic fluid in the rest of...

I have a Ford 3930 with about 540 hours. I have been happy with it and have really used and enjoyed the FEL on it. It all seems to work well, but it has a very noticeable whine from the rear end or transmission. There seems to be noise whether it is in high or low range. In fact if I am on a...

I have had rats eat my wiring to the cluster...this is the second time.... I sure need some help. I have seen someone post a picture of a 4610's wiring but have not been able to find a 3930's.... if you have or can take a picture of the back of your dash cluster, i would be very appreciative...

I finally acquired a tractor. After looking for far too long, I wound up buying from a family member a tractor which he had previously loaned to me. I put about 30 hours on it while it was here last year. I don't think he put more than a few hours on it since I used it and he decided he didn't...

Hi all. I have a '92 3930 with 1350 hours. It has developed a problem that is getting worse and I'd like to ask you'all for a tip or two. The clutch works great and it's still strong, no slips, no erratic operation, etc. My trouble is this: When you push the clutch in to put the tractor into...

Hi Guys, Long time viewer first time "poster" I having trouble with my ford 3930 the transmission will work fine for the first 15 minutes of work without stopping for a break but after the 15 minutes are over the FRONT/NEUTRAL/REVERSE lever doesn't seem to work like you can put in gear but when...

well my nephew made my day today one of those I wish I had stayed in bed. To cut a long story short the pto engagement arm was just enough off the safety switch that it didn't start, no problem happens occasionally. My nephew was going to move the tractor and it wouldn't start me being on the...

How much flow (gpm) from hydraulic pump to operate implements.

Just bought a 1990 Ford 3930, 45 hp, 2wd, no FEL, with only 1400 hrs and new rubber all around. Everything seems to work well. Paid $5500. I feel like I got a good deal. Any thoughts.

My neighbor is offering me a 1997 Ford 3930 with 250 hours on it for around 14K. The machine seems well maintained. It has Ford's FEL with a hay fork. The engine has a turbo on it. (Why would I need that?) The price seems about right but I wanted to see if there were any known major service...

Two questions: 1. Just bought 3930 4x4 tractor and reviewing operator's manual concerning tractor I see two versions of 3930 tractor- 3930 AP and a 3930 N. Does anyone know what's the difference between the two? Contacted New Holland tech support and they did not know. 2. When this tractor was...

I'm looking at a Ford 3930 here locally. I've been looking for a 50 hp tractor for a while now and this one seems good. It is 2wd and has turf tires. I'll have to put R1's on it so that's a down side, it doesn't have a remote either which is another down side. On the up side it looks good...

I have located a refurbished Ford 3930 4wd with a FEL. I believe he said it was a 96 model, can't remember. Asking price of $13,500. Is that about average? Thanks for any help.