Search results

Good Evening All, I havent been active on TBN for a few years and now that Im back im trying to remeber a TBN Members name, The gentleman is an amazing fabricator that had a cabbed Kubota that had "Kioti Killer" on his machine, possible was from canada, any help would be appreciated. Mike

I just wanted to post a few pics of my recent purchase. Kubota M6800 with 1800 hours, Woods 1027 loader, wheel weights and rear remotes. Paint is a lil rough but this winter I'll be doing a paint job! I sold my L4200 3 years ago due to divorce but due too some good things happening in my life...

Hello All, I went today and looked at a Kubota M6800, im not sure of year and am wondering if I contact a Kubota dealer with serial number if they can tell me? I am about too pull the trigger on this one it has a Woods 1027 Loader with QA, brand new skid loader bucket, 1 rear remote, rear...

Can anyone give me names of banks or equipment dealers that work with people with bad credit? After my divorce my credit is terrible but I am slowly rebuilding it and am in need of a good used tractor, Im looking for something in the 15K price range. As always Thank You all for your help.

Hello All, I sold my Kubota L4200 several months ago and have been looking a tractors to replace it since I sold it, I will be purchasing something in the 40-50 HP range, compact line tractor, I have looked at all the brands and due to finances will be buying used, I am wanting to spend 18K to...

I will be purchasing a new tractor in the spring and just picked up a brochure on the new L60 series tractors, what are the L6060 w/ loaders going for? I'm sure they are as much or more than a cabbed M series but I wanted to check

I ran out of fuel and do not know how to bleed system

I ran out of fuel and do not know how to bleed engine

Well today when I was brush hogging with the MF 573 I backed up and caught the corner of my plow and punctured the rear tire :mad::mad::mad:, it is a 16.9x30 Good Year Dyna Torque II. I have attached a pic of the hole, I am wondering if you guys have ever had a hole like this patched and tire...

My Daughter at the Marshall County Fair on her favorite brand of tractor :)

Hello Everyone, I am not sure if this is the right forum or not to post this but I am just in some need of some input, My wife of 11 years has decided to divorce me, We just simply cannot go on any longer as a married couple due to our differences, I will always love her, and I hope we can...

I have attached a picture of a UTV with a cab, I need to know where to buy the rubber moulding that holds the glass into the cab, I have looked on the web but cant find it??

Hi All, I recently purchased a Kubota quick attach skid steer attachment for my L4200, The problem is the new attachment has larger pins that it attaches with so I need bushings to make it work, I have no lathe nor anyone local that seems to want to assist me, Most of the machine shops feel...

Has anyone used one of the loader mount backhoe attachments on a tractor loader? for the price I was considering purchasing one or building one for small jobs, If I need a larger machine I can use a friends who owns an excavating business. any input is appreciated

I was wondering if any of you have ever been on a professionally guided whitetail hunt? I have been kicking the idea around for several years, I am finally in the position where I can afford a nice hunting trip (looking to spend $1500-$2500) I have hunted deer since I was six and have taken...

I was just wondering if Bobcat still uses Kubota engines in their equipment, I know all of the skid loaders that I have rented all have had Kubota engines in them. Just curious. Mike

Can someone give me a rundown on the differences in ac and dc welding, meaning when would u use ac or dc and neg or pos, I've welded with a stick welder Years ago on DC but honestly never did have a complete understanding of it! I use a Mig or Tig for pretty much everything but was looking into...

Funny video I just ran across on you tube! Kubota M6040 Cab Lowrider - YouTube

I posted this in the Kubota section but didnt get any help, maybe someone can help me? I am wanting to add rear remotes to my Kubota B2150, I am "building" the system because I know I can do it cheaper than factory remotes, I understand how to do everything except where do I tap into for the...

I am wanting to add rear remotes to my B2150, I am "building" the system because I know I can do it cheaper than factory remotes, I understand how to do everything except where do I tap into for the hyd flow there is a block on the right side that has hyd lines going into it and is capped off...

I have got the approval from my wife to start exploring the costs of a pole building for my equipment, I am looking at a building size of around 30x40x10 with a concrete floor. My excavating will is is in the ballparkbe free because my buddy owns an excavation business and he already told me...

I know that AutoCAD uses the .DXF file extension however are there any other CAD programs out there that are cheaper than AutoCAD that use the .DXF extension? I need a program to be able to save in this format because I found a water jet cutting business that will do small jobs. Thanks Mike

I just found these videos on utube and wanted to share them, they are older but still neat! YouTube - Kubota Manufacturing Plant - Gainesville, Georgia YouTube - Kubota Manufacturing Plant - Oakwood, Georgia

I have a Kubota L4200 CUT, My question is this: Does my tractor have "OPEN" or "CLOSED" center hydraulics?

I will be posting pics soon, I picked up a Meyer ST 7.5 plow for $100.00 and have been working on cleaning it up, I ordered my steel today for the sub frame, so far I have around $300.00 in the set-up

I have a Kubota LA680 Loader on my L4200, Here is my problem the 3/4" loader storage stands are bent and in bad shape, has anyone built new storage stands and if so what material did you use, please provide pics if you can, I am afraid to take the loader off because of the stands! This had to...

After searching high and low I found the deal of a lifetime, A steel Meyer plow that already has a QA Plate on it, it needs the hydraulics gone over and a sandblasting and paint. I am picking it up on Thursday for $175.00 :thumbsup::thumbsup::thumbsup: The picture is the one the guy sent me, I...

In the interest of preparing for another long winter I decided to button up some projects today on my Kubota L4200. I made a bracket out of 3/16" plate and mounted a rear worklight, and then made brackets to attach to my custom cab to hold hazzard lights I plan on mounting an amber strobe or...

I have been working on trim panels for my custom cab that I built last year I have posted a few pics and will post more as I progress. I formed the panels out of coroplast plastic (corrogated signboard) I then laid down fiberglass mat Then sanded and bondoed then coated with bedliner spray...

I just ran across this picture on Ebay, Wonder what the use of it would be? , Sure looks stable!

Hello All, I was just given a John Deere Model 170 14HP Kawasaki powered tractor, it runs great but as soon as you begin to engage the electric PTO it stalls the tractor, where should I start? Thanks

Hello All, I am in the planning stages of building a small pole building to house my L4200 and some implements, I recently ran acroos the picture that I posted from a post in 2006, I PMed the author but he has not been active since 2009. As you can see in the picture it appears that the posts...

Hello All, Ok, I am going to be renting a backhoe or mini excavator in a few weeks to do the following: 1. dig two culverts across my gravel road around 50' each 24" deep 2. dig out footers for a retaining wall about 40' long 3. dig an extension to my leech field about 100' I plan on renting...

Now that I have your attention :D:D:D:D:D Can someone PLEASE measure the overall height of your R4 tires and post it or PM me? Thank You

Hello All, Since everyone is now out of stock for some time of the 4 link ladder chains I am going to make my own, However I would like to know a few things from those of you that have this size tire with 4 link chains 1. What is the length of the side chain? 2. What is the length of the...

I am just curious to know the difference in a 17.5Lx24 and a 17.5x24 tire? I have 17.5Lx24 on my L4200 and they measure 48" high. I used to own a NH TC35 that had what I thought were the same tires as my L4200 however When I look at my L4200 the tires seem smaller to me???

Is it just me or have others noticed alot of people mentioning in the threads that posts have been removed due to brand bashing, argumentive type posts and one I saw was due to a stick figure sticker? I realize members can't post curse words or things of that nature but come on TBN where is our...

I just pulled the pin an order my tire chains from Tirechains.com, they are $258.59 shipped to my door! I slid around and got stuck a few times this weekend in 15" of snow and figured I would need them for plowing my food plots this spring as well.

After plowing all day yesterday with a half fogged up windshield I went to Walmart and bought a $20 12V defroster and mounted it to my windshield along with Rainex Interior Defogger WOWWWW what a difference I plowed for 3 hours today and the combo worked great, Just wanted to pass it along to...

I was wondering if someone out there who owns a KUBOTA brand front blade used for snow and dirt could give me the steel thickness that the blade is made from? Thanks Mike

Hey Guys, As you can see from the title I messed up royaly, Over the summer I filled my tires with water and did not think about draining them untill it was to late, 5 days of 10 degree weather and they are froze solid! I know I am a dumb A** Luckily the tires did not burst! Here is what I...

Ok guys after spinning on ice recently I have decide to look into chains for my L4200 4x4, I remember how well tire chains worked on my 8N but it had R1's on it. I need to know what you guys recommend? 1. Do I buy chains for the rear or front? I have seen alot of machines that had them on the...

I need some help, My L4200 does not have the ID sticker on the lower frame that most Kubotas have on them, is the tractor Serial Number stamped anywhere else on the machine? It was not listed on my bill of sale either from the auction house when I bought it 2 years ago, I am just concerned and...

I am planning on planting a few acres of clover food plots this spring and have access to a two bottom plow and disc harrow to prepare the soil, will my L4200 be able to handle the 2 bottom plow? I know this may sound dumb but I have never plowed in my life so this is a new adventure for me...

I am thinking of pulling the pin with my buddy and going half on a Hobart Airforce 400 Plasma cutter, does anyone have any expirience with them? Northern Tool has them on sale with free shipping. FREE SHIPPING — Hobart AirForce 400 Plasma Cutter — 27 Amp, Model# 500474 | Plasma...

I recently added a cab to my L4200 and am wanting to upgrade the alternator, does anyone have the part number for the alternator that Kubota used on their factory cabbed L4200's? Thanks

Ok everyone here are a few pics of my mostly completed custom built cab, I still have to add my wiper, lights and some other things, I also am going to be doing alot to the interior over the winter, but for now it is very useable, the heat and radio work wonderful :D, it was 30 degrees out today...

I have been searching for the most cost effective windshield wash fluid to load my tires and found this GUNK Concentrate at Grainger, It says to dilute 1 gallon of concentrate to 55 gal of water, It is only $12 a gallon, What do you all think? Wndshd Washer,Concentrate,128 oz,Blue - Automotive...

I just wanted to say that I am impressed with the new Massey 2600 series tractors, My friend just purchased a new 2615 and it is a very nice machine. -Mike

I have installed a 6 position fuse panel rated for 180 AMPS in my tractor to run the following: 1. Front Work Lights 55W 2. Rear Work Lights 55W 3. 3 Speed blower for heater 4. Radio 5. Dome Light 6. Empty My question is this, what size wire should I run from my battery to the fuse block, it...

For my cab build I was planning on running my heater hoses from the engine compartment and then up the center post of my cab to the roof where my fan and heater core is, do you guys think that I will loose too much heat by doung this? I suspect that the factory cabs are ran the same way since...

As I was beggining to put my L4200 back togather after painting it I discovered that my radiator was leaking, I found the source to be a sectoin around 4x6 inches of the fins to be crushed, I figure that I better just replace the whole radiator, does anyone know a source for a new or used...

I am sure many of you have seen the posts I have made expressing my displeasure with people allowing their children or grandchildren in the bucket of a tractor, I think many people feel that i am against children ever being around a tractor, I AM NOT! My 17 yoa son operates my L4200 the same way...

As alot of you know I am building a cab for my L4200, and I am working on the Heating system, my question is this: How many CFM fan should I use for my heater, The heater I have is similar to the ones that SIMS makes for its cabs, SIMS lists there fan at 150 CFM, do you all think that will be...

While I was driving thru my local Tractor Supply lot last night on patrol, I discovered a very lightly used 6' King Kutter Brush Hog in the "discount" area, it was originally $989 and it is marked down to $500. I think its time to replace my 1060's hog I have now :D Has anyone had any neg exp...

As the title says I am trying to find TBN members that live near me in the Wheeling, WV area, I thought it would be neat to know. -Mike

I have a question, Since I am building a cab for my L4200 and will be adding lights, backup camera, heater and AC in the future I was wondering about replacing my factory Kubota alternator with a high output truck alternator? What is everyones thoughts on this and has anyone done it? Thanks...

My L4200's fuel gauge does not work, any sugestions on how to troubleshoot it?

Hello Everyone, I hope no one minds me opening a new thread on this project but after my initial mock up I discovered some flaws in my design so I tore it down and started over, I now have a good looking cab that is progressing nicely. I also am set on using glass for the cab, I looked into...

Does anyone have any sources for door handles for my cab that I am building? Here is the link to my cab project: http://www.tractorbynet.com/forums/build-yourself/132703-kubota-l4200-homemade-cab.html

I have just completed the re-painting and installation of a remote cable valve on my LA 680 Loader in preparation for my custom cab build, I also ordered the new style "KUBOTA" decals and new warning decals from Messicks. Below are a few photos.

Hi All, Over the past several years I have welded with either a stick or flux core welder, Today I went and picked up a bottle of 80/20 gas for my Lincoln 3200HD and hooked it all up, I was so happy with the way that my welds turned out and how smooth the gas makes my welder operate, I only...

I am starting to install my remote cable FEL valve to my L4200 and have a few questions. 1. My old loader mounted valve has 3 lines going to the hydraulic block on the right of the tractor, I am assuming IN, OUT and TANK, but the directions in the install manual for an LA 680 loader only shows...

I have some questions/comments on using "Glue" for the generic term to bond glass to metal in home built tractor cabs, recently I have been following a thread by "Dirtnut" on his cab build. I am currently still in the design stages of my cab build for my Kubota L4200, I too plan on using the...

I have been looking into plasma cutters and saw the RAMSOND brand on ebay, anyone have one or any information on them? Thanks

Hello All, I am in the 1st stages of building a cab for my L4200, I have so far decided to use 1 1/2" steel tube for the main frame and 1" tube for the doors, I have looked at several factory cabs and even on large machines (NH TC75) the factories are using around 1 1/2" tube for the main...

Just wanted to express my happiness with my new R4's, I replaced my turf tires with them 3 days ago and now my Kubota looks like a tractor :) I will be filling them with a ballast in the near future, Any suggestions on what to use? My old NH had windshield washer fluid in them. The stance is...

I have a kubota L4200 with LA680 loader, I am told it has Power beyond? I need to know how to tap into this because I am building a grapple bucket and need the extra hydraulics ????

I am trying to find an open center valve and cable joystick for my Kubota L4200, I do not want to pay me Bota dealer $800 for it but need something because I am going to be building a cab for the machine.

I just wanted to post this link for al of you wanting to convert your loader mounted control to a fender mounted joystick. I priced the kit for my L4200 Kubota and it is $800 for the OEM part this is $300 I am a happy tractor guy! Surplus Center Item Detail

What size male couplers work on Kubotas rear remotes, I tried using the ones from my NH and they dont work, Are Kubota couplers only available from my dealer?

Hello All, I recently purchased a used L4200 with LA680 loader, I have already order new R4's for the machine because it came with turfs on it and doing log and woods work they SUCK!! :) ............ Any how my machine came with a puny 59" bucket on it, i had a NH TC35 with a 72" bucket and...