Search results

Does anyone know where I can get a good used 44" deck for a 129 in NC or SC? All I really need is the shell but will take whatever I can find. Eugene

Power Steering for John Deere 850, 950 & 1050 Tractors - eBay (item 180302075123 end time Nov-02-08 06:32:03 PST)

What would cause an engine to bog down when you let off the clutch, and you immediately depress the clutch and it takes 20-30 seconds for the RPM's to catch back up? Eugene

Last fall I posted a problem with my tractor building up pressure in the cooling system. Everyone on the forum tried to tell me it needed a head gasket. I was skeptical and argued that it ran too good and didn't have any of the symptoms that a car had with a blown head gasket. Well I finally...

I got my E2604 back in November. I have since had a Bush Hog loader installed on it. The loader is OK but I like the factory Japanese loader that was on my E264 better. Maybe things will change when I get used to it. Eugene

Picked up my replacement for the E264 I sold. This is an E2604, power steering, 4WD with 480 hours. Now to get the Bush Hog front end loader mounted. Eugene

Check this out before it is removed. eBay: Yanmar Diesel {17} (item 250028365415 end time Sep-14-06 23:45:00 PDT).

You guys and gals need to read "Another Tractor Rollover" in the Safety Forum. Eugene

Power Shift is clutchless shifting. Eugene

I was just cruising through the TBN Classifieds and saw a repossessed 2005 ZEN NOH YM2500. Even the banks don't know what they're financing. Eugene

Can someone tell me the difference between a 1030 and a 1030L? Eugene

I just got back from my local Tractor Supply store and now they're carrying what looks like maybe Jinma tractors under the MINOT brand. There is a decal on the side that says "Proudly assembled in Indiana". They have Koyker 160 front loaders on them. What's the story? Eugene

I welded a hitch receiver into my front bumper and modified a cargo carrier to fit my 25 gallon sprayer. A 4 way metal trailer connector in the bumper supplies the power. I'am also working on a 2000 lb winch to slide into this hitch also. Eugene PS. I tried to attach a picture but when I click...

http://cgi.ebay.com/Yan-mar-FX335-4WD-tractor-w-loader-40-HP-Full-Warranty_W0QQitemZ330003713970QQihZ014QQcategoryZ91953QQrdZ1QQcmdZViewItem I really like the part where the hour meter shows 15 hours but there is only 5 because they never reset the meter to 0. Eugene

Just saw a nice "American" made Yanmar F20 on ebay. (yeah right!) Eugene

I have a pair of 9.5X24 rice tires with 650 hours that I want to give away. Must be picked up in Western NC. Anyone interested? Eugene

Look what I\'ve done now Got a new canopy and turf tires.

What would cause pressure in the radiator to build up and blow into the overflow bottle and even out of it? I've replaced the cap with a 16lb one. The temperature of the water never gets so hot that you can't put your hand in the bottle. Eugene

http://cgi.ebay.com/Compact-Tractor-and-Tiller-1-50-by-Diapet-Yonezawa-Toys_W0QQitemZ7020262701QQcategoryZ740QQrdZ1QQcmdZViewItem Eugene

That\'s strange I just saw an advertisement on this site by ebay advertising you can get Yanmar tractors on ebay. Very strange. Eugene

I had my heart set on a Yanmar FX24D but this came along first. My"new" tractor has. Power steering, shuttle shift, hydraulic 3 point leveling, push button 4WD, parking brake and canopy. 652 hours. I tried to post a picture but my pictures are 150,000 and don't know how to make them smaller. Eugene

Where can I find 8X18 and 5X14 ag tires. I've tried locally and tried Tucker Tire who used to have every thing. Eugene

I just bought a Hinomoto C174. I ordered an operator's manual for an Allis Chalmers 5015. Everything is identical except the PTO. The manual says do not use multi viscosity oil in this engine but it doesn't say why. It says to use straight 30w. I use Rotella 15w40 in my other tractors. What will...

Today on ebay I saw a Yanmar YM1500 made by John Deere and a 45hp YM3110. Eugene

I installed a factory Yanmar power steering kit on my tractor. The instructions showed to plumb into the loader manifold and add the included distribution block. Every couple of minutes the steering will lock up. Bumping the loader control or the 3 point lift lever unlocks it. Any ideas what I...

My tractor has set up for 2 months without being started. When I started it up there is a chatter with the clutch pedal depressed. It doesn't make the noise with the pedal up and it didn't make it the last time I drove it before it set up. Is it time for a throw out bearing? Eugene

They\'re at it again! There's a 12 year old Yanmar 2000 on ebay. Last week someone I know bought a 1994 1500. Eugene

I have a tractor with a factory Japanese loader that I installed a power steering kit on. The dealer that sold me the kit told me to hook the loader and the PS through a distribution block. When I did this my 3 point lift and loader became extremely slow. Sometimes the hydraulics will lock up...

What would cause a fuel needle to jump irratically even when tractor is sitting still? Eugene

Does anyone know the filter numbers for a Hinomoto E264? Eugene

Has anyone located Roger Scotty? I'm a bit concerned. Eugene

Can anyone give the the engine model numbers of MF1040 and MF1045? Eugene

There is a dealer in Asheville, NC advertising factory rebuilt grey market tractors and in some cases grossly exagerating the hp ratings. I don't want anyone to think it's me. Eugene

I have a 1500D that when I hook up the wires coming from the generator, a wire going towards the dash catches on fire. I cut the wire in half and everything works great(except of course the charging system).I've talked to a local old time Yanmar dealer and he says that he's never had one of...

I have a 130 that has just started leaking trans fluid out of the disc brake drain hole. Is this going to be a serious problem? Also I was reading the operators manual. It says to fill trans and hydraulic system with 10W30 engine oil. Can this be right? Eugene

I've noticed on a well known web site that 3 point hitches have been on sale for a year for $159 but have been out of stock. In the past couple of weeks, they have now got stock and the price went to $199. It's funny, when I don't have something, I give it away. Eugene

I have a very loud squeel (can be heard all over the neighborhood). I previously thought is was the brakes and made a post to that effect. I did everything I was told to do with the brakes and nothing changed. It was impossible to tell where it was coming from sitting on the seat. All I could...

My drum brakes are squealing excessively all the time, not just when braking.. I took them apart and checked and cleaned them. There seems to be plenty of pad left. The drum did not drag when I took them off. It's embarrasing driving up the road and all my neighbors run to the window to see...

Can you plug up the weep hole in a water pump and still use it if it is OK otherwise? A local dealer wants $288 for one. Eugene

What would cause a 3 point hitch to stick in the up position? Eugene

I have a 130 that the 3 point hitch is stuck in the raised position. The travel lock is unlocked and no amount of weight will bring it down. Does anyone know a possible cure? Eugene

What causes a tractor to blow light grey smoke like a chimney at idle, but at higher rpm's no smoke at all? Eugene

I have a 1500d and the play I'm getting is in the outboard gearboxes where the spindle goes through the housing. Is the spindle wore out or the housing or both? How do I correct this? The front wheels are spraddled out at the bottom. Eugene

Does anyone know where I can get a tachometer cable for a 1974 MF130. My dealer says it's discontinued. Eugene

I was talking to a Yanmar dealer today that said he got a letter from Yanmar stating that they were no longer going to supply grey market parts. He didn't seem to like to deal in them anyway. Was he pulling my leg to discourage me from buying parts from him or is this true? He said when he...

Len\'s e-mail Len, I have tried twice to e-mail you and it gets sent back to me as undeliverable. Would you e-mail me and maybe I can reply and get through? buppy69@bellsouth.net

I need a front wheel for a YM1500D. Anybody have one? Eugene

How do you get to the photo section? Eugene

won\'t start I have a YM1500D that will not start. It has plenty of compression and I've bled the fuel system 7 times. It turns over normally but will not try to start running. Any ideas? Eugene

I already like this site better. Eugene