Search results

I would change both filters. Mine has a napa1551 hydro filter. The larger filter is a Donaldson from the factory but I don't recall the number, I can look when I get home. I use a udt equivalent oil.

Same motor as a 743 bobcat , try that

Land plane does a good job. Rear blade has a steaper learning curve.

Most tillers only go about 7"

8 to 12 PTO hp per ft. So for ease of math let's say 10hp per ft of PTO hp. So, a 5ft cultivator wants 50 PTO hp. Whatever the cultivator is must be a monster if it can do the the job at 6 to 10 mph.

There should be a sheer pin somewhere. Use your head and it will be just fine

Bad injector?

I have 300hrs on mine with 0 complaints

If you can get at the sending unit, fuel gauges are a resistance reading should be like 0 to 90 ohms. If you are getting a reading somewhere in there, your gauge on the dash could be bad

I don't think you want any movement in theounting brackets. Pin isn't broken is it?

I would trade for it cause it looks neat.

I have 280hrs on my 357. If I carry a whole tree top in the grapple, like 20ish feet long, I see some flex like you speak of. I try to do things like that as infrequently as possible. I have enjoyed 2 years trouble free as well.

I had a grasshopper mower with a Kubota diesel started running hotter and hotter... Had a screen to keep grass out of the rad... It will also trap the grass in rad. Had to pull the rad and pressure wash it out. It was plugged solid

We have several junk auctions around here, that run every week. An old truck snow plow can be had for $100 maybe a few dollars more if it has a mount with it.

You can buy a used snow blade for the price of the plywood

Agree, it's bent, mine sits flush also.

I had to change the ends on mine. They jic ends on a non jic reducer

Looks like 494 series planter. Deere still stocks them. They will cost more than the value of the planter, but if you already have the planter and it still works, why not.

Order your rear view mirror from messicks. But buy it for a nh boomer 55. Same tractor. As for the tool box , let me know. It shows on the ls parts diagram but I have yet to see one.

I bought a fence pounder. I got the hd8 model from kenvove. I bought it for the same reason you are stating. I can put 10 4" posts in an hour. I have mostly clay and rocks. I run it on my smallest tractor. It needs very little hydraulic power. If your around sw Michigan I will rent you mine.

Snow plow 100% better than a back blade. I've done both ways. A snowblower on the back would be better.

Grapple and land plane

I put the $15 one from Amazon in mine. Works great

Mine doesn't have the chains, but I think it weighs 60lbs maybe a bit more.

http://lspo.lsmtron.com/PartsList/wpc2000_MAIN.aspx

I would assume you could buy the boomer weights and bracket, but I thought I saw front weights on the accessory page of the parts manual?

If you want rear wheel weights you need to buy the rims the NH boomers use and buy weights from NH. Our ls rims don't have the holes to bolt the weights to

I bought a betsco articulated flail, it's pretty heavy, does a good job. I use a hydraulic top link with makes on the move adjustments easier.

Looks like an old international my grandpa had.

Yes , plumb it into the fill using 3/4 hose and whatever fitting is needed to get into the fill hole on the rear end. I run mine just through the hydraulic outlets on the back using 1/2" hose, works fine, but performance might increase if I plumbed it direct into the fill hole.

My MT357 came with three valves, must be my dealer orders them all that way, I've only seen the NH Boomer 55(same tractor) come with less than 3 remotes.

Is there a safety pin holding it in place?

Find a friend with a tractor with a remote, there's a good chance he wants some fence installed, might even become a side business. Me and a friend split a post driver, I had the tractor, he had the big trailer to move posts and the tractor driver. Works perfect

The only thing I could complain about it is the removable scarifier teeth are cheap cast from China and I broke 2 of them, of course doin a favor for a friend. If you maintain your drive in a reasonable manner , you don't need the scarifier teeth anyway. That was the only time I used them. I...

I have bush hog brand land plane. Works great. My buddy copied it and made one he pulls with his plow truck works great.

Man, if it would pick it up high enough to move it, it would be super handy on that little tractor.

For a side link look on A and I ag parts. Only place I could find one.

Can you tell us what you were doing to break the 3pt arm? I have been running equipment my whole life and never broke a 3 pt hitch.

My betsco flail is between cat 1 and cat 2 so a qh doesn't work. I have a qh on one tractor and I tried the pats on the other, it requires a longer top link as stated. I decided if I need to get off the tractor to connect the top link, I might as well do the others as well. Some implements are...

I have a buhler farm king I bought at a sale. 7 ft. Mows nice . I think I have $500. I would buy another.

Check the oil in the gear box. Have them pick it up with a loader or something similar, spin the pto, make sure it feels tight. Look at the blades, that will tell you how many hours it's run. Take the cover off the chain or gear drive , see how it looks. They aren't really a technical machine.

I have a kencove hd 8, same as a shaver. I plumbed mine right into the hydro outlets on the back of the tractor. I run it on my McCormick ct 41. A rebadged LS. Works great. Plumbed through the hydro couplers it's slightly slower than if you can dump it directly into the hydro reservoir. Still...

I have a bush hog rtg 72, been tilling clay and rocks. It's held up so far. 4years in

I have a 3 57, I bought my hydro top link on eBay, cat 1. Never thought about the side link....

Yup it's under the floor board, has 2 jam bolts that you loosen and slide the solenoid closer to the forward petal. Very simple fix. Took a minute to realize how it worked. FYI, my dealer didn't know how it worked either.

2021 mt357 hsc. 175 hrs, driving down the road and my cruise control solenoid quit working. I hit the button again and I can "feel" it grab, but won't hold it at speed. Anybody else have this happen?

I have an LS 357, hydro top link, grapple, land plane. I use the 3rd hydro outlet for my third function on the loader, no big deal if you get used to it. The $1500 kit would be more convenient, but $1500 buys a land plane to maintain the access road. As stated a back blade makes better ditches...

Comes down to budget, if you need more tractor and can't stomach the price of 4wd, buy a 2wd. I have 2 4wd, and 4 2wd

I built 2, one for my t250 bobcat and one for my LS 357, the tractor is way easier and more pleasant to use, the skid steer is too much power and weight, the plow blade wouldn't take it. You will want the 3rd function to be able to angle the blade. I helped a buddy put one on his Ford 1710, for...

If there are 5 belts on the same shieve you want to order a matched set of 5, costs a little more but insures all belts are sharing the load evenly. If not a matched set, all the belts won't be the "same" size.

I have a ditch bank mower on my McCormick ct 41, 36 pto hp. I think as stated before, it's tractor weight more than hp. I can plug the mower and smoke the belt before the tractor bogs, but if I went wider, I think it would be too heavy on the side of the tractor. I know if I get on much of a...

I took my Pats off. Always had to mess with them, plus they added enough length, that my hydraulic top link wasn't long enough to reach certain implements. A waste of a couple hundred bucks in my opinion. Just buy a full QUIK hitch and save the headache. Just my opinion, of course.

I have bueler farm king, made in Canada, 7 footer. Bought it at a sale. Parts are cheap and available. Built like hoss. Cut 10" tall grass, no clumps. Only thing I have had to replace is the run flat tires, they were so rotted they fell apart while I was mowing.

You do need a slightly longer metric machine screw than using the one in the cab currently

Here is the one I bought from messicks

I got one from New Holland. LS doesn't list it as an option, new Holland does.

I bought an mt357 in October of 21, I didn't get a cooler...

I have a 2021 Mt 357hsc , 40 hrs, I love it so far. Yesterday, while moving some firewood, the instrument panel froze, like none of the guages or hour meter would move. All other functions of the tractor were fine, lights, wipers , radio heat etc. Just no guages. Even when I shut the tractor off...

I have a bush hog brand 72". 32 pto hp handles it in my heavy clay. I still plow, skip the disc, pull a packer behind the tiller. Next to my sure stand seeder,my favorite attachment.

Mine has a vent on the opposite side that the fill port is on

On my McCormick ct41, a rebadged LS, the top of the tank is where all the capacity is, will read full until you get to about 1/2 gone, than the Guage falls fast. I thought I had a bad sending unit until I actually looked at the shape of the tank.

I have a mt357. Love it. Get as much hp in whatever frame size you choose. I run a 6ft tiller and it covers the tracks. Spend a little more and get a cab. Best $5k extra I ever spent.

I use Shaeffer simplex 315 supreme. Same as udt supreme, which is the Kubota spec. Every brand calls the oil a different name. LS calls it something else.

I have a McCormick CT 41 hst. Same as a ls4041. I bought it at a sale non running (bad battery). I think it's a 2008. It looks like the previous owner put it in gear and let it drive itself through the woods. Hood is smashed, fenders are so bad, the guy driving must have lost a leg. I have...