Search results

I'm considering this UTV (or, depending on your opinion, glorified golf cart). For $13,999, it looks pretty decent however. https://www.kandiamerica.com/product/cowboy-e10k/ Apparently these are sold through Lowes stores. This particular model is not shown on the Lowes website however. My...

Land Pride RCR 1860 rotary cutter. Why is there a small hex socket INSIDE the larger hex socket on the gear box oil drain plug?

My TC33DA hour meter has stopped working. Everything else in the instrument cluster works, including the tachometer. I've read some other posts here where both the tachometer AND the hour meter have failed, caused by alternator AC voltage, electrical connection, or other issues, but that is...

The owners manual for my TC33DA recommends checking and adjusting the fuel injectors and valve clearance at 600 hours. Are these involved procedures? About how many hours of labor should a dealer charge me to perform these maintenance services?

I hit a stump and bent the left side 3 point hitch arm on my TC33DA :(. Photos attached. I seem to recall that it originally had a slight bend in it, but perhaps not? The right arm does have a slight bend. I'm looking for either photos or a description of what is a "normal" bend, if any...

I need to drill out and replace a broken grease zerk on the rear wheel for my rotary cutter. I can't drill straight into the zerk with the laminated tire on the split rim, so I thought that I could simply unbolt and separate the two rim sides from the tire. With the tire out of the way, I...

I've notice that my power steering fluid reservoir cap/dipstick is loose, like REALLY loose. I'm afraid it's going to bounce out and get lost. I don't remember it being this loose in the past, and it certainly shouldn't be worn out. It's not like I'm removing it every day. Do they shrink...

I had a mishap with my TC33DA. A small diameter log that I drove over turned upward and hit my radiator, where the lower radiator hose attaches. I'm hoping that the damage is confined to the hose and clamp, although the radiator does have appear to have a small dent in it :(. The coolant leak...

I snagged the front axle protector plate on my TC33DA, probably on a stump, and bent it up pretty badly. The new replacement part 86402588 is about $100 😮, but I think I can have one made by my local welding shop for less than that. It's a 3" x 12" plate', 1/4" thick steel, with 2 bends and 2...

These brackets are on the bottom rung of a Werner fiberglass platform two sided stepladder. They are able to be slid across the rung, and their are two of them on each rung (4 total). What is their purpose?

I'm planning to construct a 48 wide x 40 deep pole building on a site that has a moderate slope. So, the floor level at the front of the building would be just above grade at that location, and floor level at the back of the building (40 feet back) would end up being be about 4 feet above the...

I'm considering construction of a storage building - something in the 40 x 50 foot size range. One unusual thing that I want this building to have is a 40ish foot wide clear opening (like an aircraft hangar) on the 50 foot wide side of the structure. I also need the building to be reasonably...

I'm considering getting a UTV to use for snowblowing plus general property/trail maintenance. I'd like something with side by side seating that carries 2 or more people, with an enclosed cab. In the winter, I have a 1000' driveway that I need to snowblow (prefer a snowblower to a plow blade)...

I took the loader support stand off my New Holland 15LA loader (did not remove the loader from the tractor, just the support stand from the loader). A few weeks later, I went to put the support stand back on, and got confused. I'm not sure that I have it on the way it was originally. I...

I have some areas on my property that are heavily infested with buckthorn. These areas have more buckthorn trees than desirable trees, and it would be difficult to cut and spray the buckthorn in such dense conditions. To remove the buckthorn in these thick areas, I am considering hiring a...

I have a New Holland TC33DA tractor. Today I noticed a hose clamp laying on the ground near where I was using my tractor (photos attached). The markings on that hose clamp match those on other hose clamps on my tractor, so I assume it came off the tractor. I looked over the tractor and...

I don't remember the fuel fill overflow tube on my TC33DA dangling free and low like this. Is it supposed to be attached to something up higher somewhere?

My New Holland TC33DA seems to be stuck in full time 4WD. I can't turn without the rear tires rubbing and skipping on the ground. I checked the part-time/full-time 4WD lever/cable, and it's moving freely. It attaches to a small arm on the front underside of the tractor (with a spring...

I have a grapple bucket with two hydraulic lines for the grapple, fed from the rear remotes on my TC33DA. I have hydraulic couplers mounted on the FEL, so there is about 4 feet of hydraulic lines between these and the grapple cylinder. Whenever I disconnect the grapple bucket, I have a hard...

I have a Stihl 026 chainsaw. When it starts to lose power, I know it's time to blow out the air filter with compressed air. Then it runs great again until the filter clogs again. Lately the time between cleanings has been shortening. I suppose any filter gets to the point where it can't be...

I will be doing service on my TC33DA shortly. As part of a separate implement deal, I was provided with some filters for my tractor that are Case and other brands, so the part numbers differ from the New Holland recommended part numbers. I got an Oil, Hydraulic, fuel, and HST filter...

I'm approaching 100 hours on my New Holland TC33DA after 3 1/2 years of ownership (I use the tractor about 30 hours per year). I did the 50 hour maintenance a few years ago, which called for replacing the HST filter but not the fluid. I appears that changing the HST fluid itself isn't called...

SCC Super Z8 They have a size that will fit my 15-19.5 rear tractor tires. They look easier to handle and to put on than regular chains. They're comparable in price to regular tire chains by the time you purchase the tighteners. Our local fire department uses them on their apparatus and...

I have an outdoor wood burning furnace that provides heat for my house. I want to expand the system to also heat my domestic hot water. I have a 50 gallon propane water heater, and constructed a heat exchanger that transfers heat from the woodburner water loop to the heater tank via thermal...

How long does it take before the fuel deteriorates? If I add a product like Power Service, how long then?

Hello, It's time to grease the gears in the head of my Toro string trimmer . According to the manual, I'm supposed to use a "good quality, lithium based #2 grease" for this. I happen to have an aerosol can of 3-In-One brand white lithium grease, but the label on the can doesn't say anything...

I'm trying to remove the bolt that goes through the PTO shaft where it attaches to the gear box of my Land Pride rotary cutter (see photo). I've removed the two stacked nuts on the underside, but I can't get the bolt out. I can turn the bolt about 1/4 turn in either direction, but no more...

Is the bolt pointed out with the arrow my PTO shear bolt? This is the PTO shaft for my snowblower. I want to get some spares to have on hand.

I have a New Holland TC33DA, but have credit on my account at a local Case IH dealer. I would like to use my credit to purchase some filters for my New Holland tractor. I assume I could use DX33 filters on my TC33 without a problem. Has anyone had a problem doing this? I might need to cross...

I have a New Holland TC33DA, but have credit on my account at a local Case IH dealer. I would like to use my credit to purchase some filters for my New Holland tractor. I assume I could use DX33 filters on my TC33 without a problem. Has anyone had a problem doing this? I might need to cross...

I use my TC33DA for about 50 hours a year. So, it takes me a few months to go through a tank of diesel fuel. It's now November and I have a pretty full tank that was filled with fuel purchased this summer. When I purchase the fresh fuel, I do add Sta-Bil fuel stabilizer to it, which is...

I have an idea for a folding 6 x 14 foot trailer to haul my TC33DA. It would be 14 feet long in operation, but only 8 feet long when folded. I want to do this so it will take up less room in my shed when not in use. My question is, should I go to the time and trouble of presenting my...

I have a grapple bucket with a double acting hydraulic cylinder that opens and closes the grapple. The grapple operation is a bit too fast and I would like to slow it down somewhat. I've read about flow restrictors and am wondering if I need one in each of the two hydraulic lines, or if...

I have a TC33DA with a Virnig grapple bucket on the front. The bucket weighs 875 lbs empty. I'm mostly using it for brush, however sometimes use it to haul firewood. The Virnig grapple was used and I got a good deal on it. I suppose if I were buying something new I'd look for something less...

TC33DA 4WD won\'t disengage I have a TC33DA with HST, supersteer, and sensitrak. My two options for 4WD are either engaged full time, or automatically engaged/disengaged by the sensitrak. Today I was using the tractor on some muddy slopes, so I moved the lever to the full time 4WD position...

I have a New Holland 15LA loader, and I would like to attach a bracket to hold some hydraulic couplings to the cross piece of the FEL arm. This is the same cross piece that already has holes drilled in it for the hydraulic line clamps. I certainly don't want to drill into the loader arms...

My dealer made up some hydraulic hoses for me. He put ends on the hoses that are threaded, with an outside diameter of 3/4". The inside diamter is about 1/2" (I'm not sure how to correctly refer to this, should I call these fittings 3/4" or 1/2"?) Anyway, my main question is this: I was told...

Can anyone tell me what the lift capacity of the TC33DA 3 point hitch is? I can't find it in the manual. Thanks, Tom

Any suggestions on how to remove hydraulic fluid from leather? I've soaked and washed them several times and they're still oily. Thanks, Tom

What\'s that hydraulic hose covering fabric stuff? What is that tubular burlap-like fabric material used to surround and protect hydraulic hose called? My dealer wants $2.25 a foot for the stuff Is there something special about it that makes it so pricey? Can I find it cheaper elsewhere...

I have a New Holland TC33DA with one remote hydraulic valve and a pair of quick disconnect connectors. The connectors are both female, and consist of a spring loaded outer ring that is pulled back to accept a corresponding male connector. I've noticed however that most rental skid steer...

Does the TC33 3 point hitch exert downward as well as upward/lifting force? If it does exert downward force, is this force equal to the upward force?

I need two hydraulic extension hoses, each 12 foot long, with fittings (male on one end, female on the other). What is a reasonable price for such? Are there sources for pre-made extension hoses in this type of length? Thanks, Tom

I'm reading my owners manual for my New Holland TC33DA and 15LA loader. The chart of lubricants lists almost exclusively "Ambra" lubricants. I can't find any info or web site for this brand. Any experiences with these products good or bad? My most immediate need is grease for my loader. The...

Does anyone have a suggestion for a FOPS (falling object protection system) for a TC33DA? I don't need a fully enclosed, glassed in cab. Just considering something for when I'm working in the woods, in case I accidentally knock a tree down onto myself I checked the New Holland price pages...

My brother has a Case 1840 skid steer. I will soon have a New Holland TC33DA tractor with a quick attach FEL. The quick attach system on the New Holland is designed to accept skid steer attachments. My brother tells me however that his skid steer uses an older style of attachments, and they...

I would like to store my 5 foot rotary cutter in a vertical position during the winter season, so it takes up less floor space in my shed. I'm contemplating building a stand with some heavy duty wheels and a support bracket of some sort to keep the cutter vertical. Obviously, it will have to...

I've been told that it's best, if possible, to let grass or ground cover grow tall over a septic drain field. Can anyone confirm or refute this? I know you wouldn't want trees on the drain field due to potential root problems, but what about grass?

I would be interested in obtaining service or maintenance manuals for my new TC33DA. When I purchase a major item, I often like to have more information about the product than what is contained in the owners manual. Has anyone obtained such manuals, and if you got them from your dealer, were...

I'm purchasing a New Holland TC33DA which I will be using occasionally during the winter. I live in Wisconsin and -20F or colder temperatures do occur here occasionally. I'm thinking a block heater would be a good idea. I know there are different styles of heaters for cars i.e. coolant line...

Hello, I'm new to tractors, and have a hydraulics question: I'm buying a New Holland NH TC33DA with a FEL. I'm not purchasing anything right away that requires rear hydraulics, but I want to be ready for the future. If I ever buy/rent a backhoe in the future, how many hydraulic lines are...

Can anyone advise the capacity differences between these two loaders? It appears that the 15LA has curved arms, does this mean it has less capacity than the 7308? I'm researching the purchase of a New Holland TC33DA and want to get a loader with it. Thanks, Tom

I'm want to purchase a compact tractor, and the Case IH DX33 or the New Holland TC33DA seem to be what I'm looking for. I understand that CNH corporation owns both companies, and the tractors seem very similar. Are there significant differences between the two? I want to do loader work...