Search results

To All, I recently re-tasked my 20 year old GC2300 and purchased a GC1725 and want to use my GC2360 snowblower on the new tractor. From what I have seen, the 2360 fits all GC series tractors (basically the front hitch and drive shaft) but I am looking for an adapter to go from the old GC2300...

I have partially retired my GC2300 (it still has work to do) and I just started looking for a quick attach setup. My 2300 has had Pat's system on it since not long after day 1. I have seen plenty of messages regarding quick attach systems over the years but I have just started searching so...

To All, Have been running this GC2300 for nearly 20 years and now I have convinced the treasurer it is time for a new one. We have some property along the river that I figure the 2300 has still got enough to maintain for at least awhile. I have looked at multiple tractors including Mahindra...

Stupid is as stupid does. I removed the belly mower from my tractor and attached the tiller for some garden work. I don't normally remove the short shaft from the mid pto unless I am doing something serious since it is not really in the way. So I get in position, move the mid pto to inactive...

With all that has been going on I haven't had a chance to be here for awhile. So now I come calling with a problem. It was quite a shock for me when one day I turn the tractor key off and the engine doesn't cooperate. I suffocated the engine that day but after some research, found the push...

I purchased a YM 180D a few years ago mainly to run a brush hog at another property we have. I no longer need it for that purpose and am getting it ready to sell. Probably will list on ebay but wanted to give you guys a heads up. I have used this tractor for various things like running...

I had to take my tractor in for service (non JD) and my dealer lent me an 855 with a front loader. My problem is changing the range on the hydro drive. It seems to have a mind of it's own when to change ranges. It was in low when I got it and I put it in high but that didn't do anything. I...

I purchased a Yanmar 180D last year to do some mowing on a remote piece of property. I didn't really get to use it much until now. What I have found out is that in using the 3pt is that it won't stay down. I have to hold the 3pt handle to keep the hitch from raising on it's own. I haven't...

I mentioned in another thread that I purchased a 180D recently (originally thought it was an 1802D). With the research I have done thus far I understand that a YM with 4 digits (ie: YM1802D) is a grey market tractor and the YM with 3 digits (ie: YM180D) is a tractor built for US sales. So it...

Spent the past few weeks researching and searching for a used tractor to run my 48" rotary mower so I wouldn't have to haul my GC2300 the 100 miles to mow grass on 5+ acres at camp (this was actually my wife's suggestion and I am not one to pass on a chance to acquire more equipment). I ran...

Well I am now faced with the first major issue with my tractor since acquiring it a few years ago. The diff lock won't engage. When I push down on the pedal? stick? engager? it will not go down all the way. I had the tractor in for spring maintenance and told them I needed it back before this...

I recently bought a GX335 with a 2 bag collection system but after mowing once, I like the sound of a 3 bag setup. I haven't done enough research to answer this question myself but wondered if anyone knew if I could change to a 3 bag system and salvage the current power flow unit (the most...

I am replacing my 1 year old Simplicity Regent 24/50 with something a little bigger and some other features. My dealer has a GX335 with 300 hours. From my research so far it looks like he is offereing a decent deal (with my trade) but I wondered if anyone had a serial # guide so I can figure...

Well I have decided to take my GC2300 out of the mowing business. I ordered a bagger from my dealer last week and realized I could get a dedicated lawn tractor with mulching mower in the same price range. Since I remove the mower for all other activities (grading, tilling etc) I have found...

Sent the tractor to the dealer weekend before last (right in the middle of the big snow we had here) to, among other things, have a Woods BH6000 backhoe put on. I got some time on it today digging a french drain around a currently built shed and have a new found respect for good backhoe...

Last year I rented a King Kutter 60" tiller. It was new and the shaft hadn't been shortened yet and I had a heck of a time unloading the beast. So by the time I got it all figured out, I had to return it. I came away with the conclusion that the 60" was too big for the 2300 although my dealer...

When I had my snowblower put on in November I had the dealer check the hyd. pressure and he said it was in specs. I had it checked because it just didn't seem to have as much guts when I was removing trees and shrubs. So now that the weather has gotten to the point I can get back to doing the...

Well I have had my 2300 for over a year now and am still having a blast on it. I placed an order with my dealer yesterday for a snowblower so I am hoping for lots of snow this year. I used my FEL and rear blade to move the snow last year and, even though I had an oak strip on the FEL, managed...

I am currently in the market to add a log splitter to the 3pt on my 2300. I want one that uses the tractor hydraulics (I am having the dealer add a rear hyd. hookup) because I have enough engines and pumps to take care of as it is. I am looking at a Sellcom Ramsplitter. If anyone has...

I wish I had known what a toothbar on my FEL would do for me when I bought my 2300. I guess if I had read this forum more before I bought it last year I would have known. Anyway my MF dealer ordered a Woods toothbar which I installed last night. I have alot of clay to deal with and what a...

Got some snow in western PA last week (looks like a bunch more is on the way). I bolted a 1" piece of oak behind the front edge of the FEL bucket to keep it from tearing up the blacktop. It works OK but would work better if I could angle it. Several people mentioned using the rear blade and I...

Winter will soon be on us and here in western PA, I think we will have plenty of snow to move. Of course I plan to use my 2300's FEL to remove snow from the driveway. Was thinking of getting a sno-blower...but maybe next year. So to prevent my blacktop from getting scraped up I was thinking...

So I did the 50 hour maint. on my 2300 (change engine oil and filter, change hyd. oil and filter, grease, tighten the loose stuff) and am now more intimately familiar with this piece of equipment. I see what people are talking about when they mention the hyd. filter being in a potentially bad...

I am looking to buy a pressure washer and thought having one to connect to the pto on my gc2300 would be a nice idea. One less engine to maintain. My initial search listed several companies in England but only one in US. If anyone has any info on where to buy one of these, I would...

Took a 3 day weekend and spent most of it on the tractor. Moved about 24 tons of topsoil, tore out a bunch of brush and trees, dug up stumps and generally had a blast. Added a 5' blade to back. Makes smoothing out topsoil much easier. But here is the problem, and my main complaint about...

I don't know if I should start another thread, but I guess I am. because I want to get feedback on any ideas people might have for mods. The dealer came out and replaced the washer/o-ring on the front loader control. Said he had to order a different one but this should work for now. I...

Finally received my brand new GC2300 last night. Removed the rear mower and went about moving some top soil around. After about 45 min., I looked down and noticed my right pant leg and shoe were covered in hydraulic fluid. The front loader control box was spewing. Looks like there is a bolt...

After much research into pretty much every tractor made in the sub to compact range, I have settled on a GC2300 with FEL and 60" rear mower. Price is $12,500. I could have saved some on internet and buying out of state but I have a reputable dealer close by and thought that was more...