Search results

Just want to warn others. I needed a lens for my Mahindra 4510 tractor. Guy wanted $40, high but not finding it anywhere else. Said I would send him a check. Would not accept. I said hold the item until it cleared and then send. No he said. I said for the small amount I would send...

I was given 15 pounds of fine thread drywall screws intended for drywall attachment to metal studs. Have drywall I want to attach to wood studs. Will they work for same?

I have a gambrel(some call it a hip roof) "barn" with a shingle roof, a lean to with a standing rib metal roof that is attached. Never had any leaks until about a year ago I first had 5 inch D spoutings put on with similar downspouts running into underground pvc to carry the water away...

Not for a tractor but. At an auction today, a wide tracked walk behind snow blower with 9 HP, electric start, power steering, forward and reverse that runs sold for $45. I would have had some interest but it would just take up too much room in my garage. I got a set of 4 aluminum...

I have everything but the front protective glass lens. Can't seem to find one. thoughts?

Because I saw another insulation post I thought I could ask one here. I have 2x6 stud walls. The breaker box is about 3 inches deep so there is a gap of about 2 inches or more behind it without insulation. This is on an exterior wall of the house but inside of course. Can I put...

I have an old cast iron hinge that is frozen. I have removed it. Tried penetrant, heating it. Hitting on it gently as I do not want to break it. As it has some size I am soaking it in new transmission fluid just hoping it might get into all areas to "free" it up. Any thoughts? thanks

My old fuel filter was located low and underneath the tractor by the factory. It was so vulnerable I tore it off at least 3 times when bushhogging areas where there were hidden limbs etc. I asked the shop to either relocate it or place a guard cage around it to protect it. They placed...

Just recently my gravel drive got a great deal of washboarding. No different equipment up and down the drive. Only real change over the last several months is extreme drought. Any thoughts that caused this and the best way to remove?

I know this is for tractors but not sure where to post. A fellow has a Cub Cadet tracked self propelled snow blower for sale. I think it said 286t. It starts and runs but barely. The owner thought the gas was old and clogged the carb. Wants $100. Anyone have any ideas...

Got my 4510 back after 12 weeks in the shop mostly waiting for a few parts, O ring and bushing. With that delay the vegetation at the river (even with no rain for over a month) was over 3 feet tall. Ventured there slowly but still managed to snag a hidden fallen ash tree that...

I have a trailer I carry my tractor on. It has a junior light I Beam on both sides. 2 1/4 inch flange, 8 inches high but only about 1/8 inch thick. An old mobile home frame from the 50s. Not rusted. The tractor is a cab MFWD 45 HP Mahindra 4510 with a Bush hog brand heavy 6...

I have a 24 foot long trailer. Four 7 foot long hickory detachable ramps in the back. When I load my tractor it lifts the back end of my pick up off the ground. Have loaded it without blocks under the back of the trailer and with them. The better method and the best for the trailer...

I hate to complain but prices are crazy. For some exterior work using PVC. Nice to work with but not cheap. In one spot I thought I would substitute a treated board. Got a 1x10 inchx8 foot. Actual of course 3/4x9 1/4 x8 feet. Kind of a glorified shelving board. $25 before tax...

I have a 20 feet long deck (24 feet or nearly so with the tongue) trailer. I think it was an old mobile home trailer frame build. Has worked for nearly 30 years transporting on occasion my 33 and 45 horsepower loader tractors and 3pt attachments. Today I was unloading my Mahindra 4510...

I have a manual transmission tractor. It loses about 2 quarts of hytran fluid in 10 days or so. There are no visible leaks, drips, wet spots that I can see whether it is running, parked or just sitting there. There is nothing attached to the rear remotes. It has a front end loader and...

My Mahindra 4510 loses transmission fluid regularly. As much as a couple quarts in a week or so. Cannot find a leak or a drip or a wet area anywhere, parked or running. Curious as to where this fluid could be going without a trace that I can find. Thoughts. Thanks.

I have a 6 foot Bush Hog brand rotary mower. Need to change the gear oil, it is almost yellow, looks like it could have gotten water in it. Sat out all winter uncovered. 80/90 weight gear oil sound correct for new fluid?

I have Pella wood windows I wish to install in my lean to attached to my barn. Question 1: The frame wood is not primed on the parts that will be in the wall. Is there a reason for this and would it be OK to prime that area before installation or are they left bare for a reason...

I have a chance to get a Quality Steel 18 foot tandem axle car trailer with winch. I think made in Decatur, IN. It has a steel deck. The axles are both rated at 3500 each for a total of 7000 pounds. I think the trailer with winch could be near 2000 pounds. I would like to carry my...

I have a lean to on my building. Decided to enclose it. Poured a concrete floor. Block on top and then stud walls covered with 3/4 inch plywood and some 3/4 OSB. Covered with house wrap by Carter Lumber Co called R Mor. Top and bottom edge now sealed with brand name sealant tape...

For several days as I exited the ramp on the interstate I saw a hose laying in the side ditch. I left it there in case someone that lost it would pick it up. The clean up crew would probably pick it up Monday and it would be gone. So today I picked it up. Unsure what it is. A black...

I have an area about 150 feet wide and 600 feet long that stays pretty wet near the river. I have been able to have it mowed twice in drought conditions to get rid of junk shrubs, saplings etc. Even then the track equipment nearly got stuck a couple of times and certainly left large...

I have two. I have 3/4 inch plywood that has a black "sandpaper" coating on one side. I would like to use it to sheath the outside of a lean to that will be heated and insulated. Should the black "paper" be facing the heated interior or facing the exterior? No markings as to...

I have a Woods 3 point hitch 750 Backhoe attachment. There is a steel piece about 8 inches long with a hole in one end that slips over a projection to lock the boom from swinging around or moving in transport. Unfortunately upon loading the tractor/hoe combo the bucket must have made...

At a work project they were going to put several hundred feet of all thread rod in the dumpster as the job was complete. Most is in 12 foot long sticks. Most 1/2 inch, some 3/8s. I have no near future use for it but have a concrete project coming up. Can I use it instead of rebar...

If anyone has an engine for a 2004 Rhino 660 UTV please let me know. thanks I am in western Ohio

I have sufficient used but good galvanized fence that I would like to use in a concrete pour. If that has any merit would they be secured together with wire as with rebar or some type of plastic strap or other wise? What also would be best to hold them up in the concrete during the pour...

My brother has a NH 40 TC tractor with a loader. The loader will operate properly but the 3 point lift arms will not lift. They can be lifted by hand but will not with the hydraulics. Thoughts?

I have a large quantity of commercial rubber roofing. It is perhaps 1/16 thick or a bit more. I plan to extend my gravel drive. In the past I have taken the top soil off and then put gravel in. Only needed to refresh after about 8 years but get some weeds etc. in the same. The...

I have some deep tractor ruts from when the ground was quite wet. Been there about 15 months. On the more level ground I considered using a box blade with the rippers slightly lowered in an attempt to spread/fill in the same where there is rut compaction. On the steep inclines rather...

Anyone have any comments on either as far as likes, dislikes and reliability issues etc. Thanks

I have some used tongue and groove panels that have a 4 inch rigid foam core with 1/16 inch white steel sheets covering the top and bottom of the panels. I would like to attach them on the ceiling. The spacing there is 16 on center 2x8s. I would screw or lag screw them to the wood...

I have a 2004 Yamaha 660 Rhino UTV with a winch, snow plow, aftermarket lights, wheels and tires and sound system. I bought it from a retired fellow that said it just quit running while he was driving down the road. He did not have it long but bought it from a State that did not issue...

I have a high pitched squeal on my tractor. Could it be a bad water pump, alternator or AC condenser? The fan belt seems to me to be a bit too tight but it is new and has probably 20 hours on it. Would have thought it would have gotten looser, not tighter. The noise is from the...

I have a chance to get 250 feet of 1.5 inch flexible aluminum conduit for $350. I want to wire my barn. See any advantage/disadvantages in this?

The owner said I could use if for free. I do not want to do that. I will refuel when done and I will also operate. He delivered it and will pick it up when done. What would a fair rental rate per hour be? Thanks

I am going to mow with the same. It has a MTL Extreme xcl 7 foot mower on it. The owner said no charge to use it but I will not do that. I will refuel when done but any idea what a fair rate to pay him per hour? I will run it. He dropped it off and will repick it up. Thanks

Anyone know of a right door for a Mahindra 4510? Need the glass/frame and handle. Thanks

I have 2x6 and 2x8 walls that have Rockwool in them. Will cover the interior walls soon. Any advantage of putting up fan fold or 1/2 Dow rigid insulation before the walls are covered to act as a thermal break? Also if done should the seams be taped? Thanks

I have quite a bit of plywood with a black facing on one side. Almost like a thin paper with a very fine grit to it, like 2000 sandpaper. Unsure what it was to be used for. Wish to use it on a stud wall inside a garage type building to enclose it. Rockwool is in the cavity...

An enclosed trailer has a 2.1 liter, 21KW Yanmar powered Stamford generator. Diesel fueled. The flapper on the exhaust pipe lifted in some manner and let rain water enter and get in the engine. It is a 2006 unit but only about 100 hours. Not sure how long the water was in but...

From the transformer an underground electric line is going to be ran to the house. It will be in 4 inch schedule 40 PVC. It needs to be at least 36 inches underground. The area it runs tends to get wet. After the electric line is it reasonable above the PVC to place a 4 inch...

I have a project I want to use rockwool, not mineral wool. Can't seem to find anyone that sources it here. Any thoughts on where it might be found.

I have hard foam insulated panels. The insulation "looks" like expanding foam. It is metal on each side. Steel I think and not aluminum but I will check with a magnet. They are 4 inches thick. Panels up to 4 feet wide and 16 feet long. I would like to insert those between studs...

It appears there is a problem with the PTO in the NH TC40. Squeals and the bush hog bogs down when in use and the tractor cannot move. If the PTO is disengaged the noise ends and the tractor has full power it seems. Maybe PTO seals? Anyone had this problem and possible cost to...

I have need of a oil pan drain plug bolt and nylon gasket. Actually only need the nylon gasket but perhaps should get both. Anyone have a spare or where to get one? Did not see it listed at Hoyes. Thanks This is for the 336d.

I

Can anyone give me any insight on the Foton FT 804 Eagle tractor. Good/bad and pros/cons etc. Repairs and parts availability etc. Thanks

Anyone ever have one? Pros/cons. Troubles/price etc. Thanks

I had logs skidded out and the equipment in the soft soil left ruts up to a foot deep. Mostly on my steep hills/lane. They are frozen now. Should I just get a dozer in the Spring to level them. I do have a small lane drag with rippers, a disc and on the flats a plow for my Cat 1...

A number of years ago I got a door glass, I think about $300 and $400 for shipping. I now see the same for over $1000. Not sure if that included shipping. May just take the doors off as I do in the summer since the AC went out and that would be over $1500 to repair.

I posted this in the general ag tractor section but will also post it here. My Manual front wheel drive is not working. The lever/rod seems to move OK. Only change since it quit working was I tightened the jam nuts on the clutch and brakes. The free play was correct on both but the...

I have a 45 HP Mahindra 4510. The MWFD just quick working. The 4wd lever will go forward and backward (on and off) and the lever moves but the MFWD is not functioning. The only thing I did differently was tighten up the jam/lock nuts on the clutch and brake rods. Both had the...

I have a Cat I MFWD 45 horsepower tractor. I was asked to help skid heavy logs up muddy, fairly steep hills. A real struggle as the tires mud up quickly and it is a slippery mess and traction is lost often. Anyways I put a steel cross bar that fits in the two lower units of the...

I have trees being taken down that need to be moved up muddy hills. Some are large and may weigh a ton. The skid steer will be able to lift that amount but will there be enough traction on the wet, muddy hills to do that effectively and safely? On smaller trees it has been a real...

Anyone know how many hours between oil changes is suggested for the Yanmar 336d engine?

Are they even installed much anymore. I see large all metal building and roofs without them. Any need or are they really that effective?

I have about 70 acres of hardwood. A number of firms want to buy it. Some would use tracked equipment, some horsed. A number of ravines, and many trees in a soft, boggy area. Most are under 30 inches but some 4 feet in diameter, that is cottonwood and sycamore. Many walnuts...

I know this is a tractor forum but I think the question is the same for a truck or tractor. I have a Dodge 1/2 ton truck. It has been a good truck but it eats power steering pumps. The truck is only used on the highway, not off road. The latest pump last 3 days, I am sure a bad unit...

They are putting in some new electric high tension lines/metal poles.. To access the sites they have laid down the following. Over 1 mile of the same. 2x10 inch treated planks, with 3 laid on top of each other for a thickness of 4 1/2 inches. Bolted together. The planks are 14...

The New Holland TC40 has this issue. It did not start. Usually right away. Got the operator's manual out. Said one needed to sit on the seat or have the parking brake on to start it. Never needed the parking brake on before as just sitting on it was the safety feature. Tractor in...

I was mowing grass with a 5 foot light duty King Kutter brush hog using a 40 horsepower NH tractor. It cut well in areas I had cut earlier this Spring but when it got into 2 foot tall grass (not that thick) it caused the blade to nearly stop but enough it did not cut at all. The mower has...

I planted thousands of small white and red oaks about 25 years ago. For the most part an abject failure but that aside, for the ones that made it they are probably 15 feet tall or more but bases generally under 6 inches. The problem is some persistent weed trees have grown up very near...

I have a Mahindra 4510 tractor. The oil pan has two drain bolts. One is stripped. The shop said they could not find an oversize repair bolt and as such had me order a new oil pan at over $300. I would have thought there would have been some other available cure. From memory I think...

I have a 3 pt 6 foot wide heavy duty Bush Hog brand rotary mower. It was a Township mower until they got a new one. This has happened 3 times in 6 years after about 50 hours of mowing each time. The nut holding the stump jumper and blade on comes loose and the stump jumper and blade...

How difficult/expensive to convert a 3 phase propane generator to single phase for home use? Would the transfer switch need to be changed also?

My cousin has a 1 cylinder Yanmar diesel tractor. Probably 40 years old. It is 2 wheel drive with front and rear wheel weights, a mower, a grader blade and a 3 point hitch rototiller. He said it is 11 or 12 horsepower. He thought the number was a 112 or 121. It is out in the...

Generac Guardian whole house generator. A friend has one he is not going to use anymore. Have interest but it is about 15 years old and I think it is a sold lifter unit and not the newer hydraulic lifter type. For the little they run how often and how much of a hassle is it to adjust...

I need to install HVAC in a 2 story building. At this time the walls and floors are pretty much open. My only real options are propane or electric for the most part. Have read some about the mini splits and comb heat pumps. Some of the combo heat pumps say they are quite...

Considering putting 2x6 joists over a 7 inch thick concrete slab. Over that 3/4 plywood and 3/4 inch T&G hardwood flooring. Anyone have any experience with loose fill Perlite as insulation over the concrete and between the joists? Compare this to loose fill EPS or a combo of...

I have a two story building sitting on a 26x36 monolitic slab built this way. All top soil removed, maybe 14 to 16 inches. Then compacted the soil. They about 9 inches of clean gravel added and compacted. Then moisture barrier of plastic. Then rebar and mesh and 7 inches...

I talked with a fellow that has done some CRP planting for me. He bought a new, 2020 New Holland cab tractor, said 4 wheel drive but perhaps MFWD, and a loader. $45,000. I would not have thought that possible. Glad he was able to secure such a good deal IMO from a NH dealer...

I have a wet area in a path near the river at the my farm. When it is really dry one can get a tractor across it. Not dry enough yesterday and got stuck. After cutting a tree to give more room I was able to get out after about 30 minutes. Ruts 16 inches deep and the mud is a black goo...

I was mowing with my Bush Hog brand mower with my Mahindra 4510 and then all of a sudden I was not. The red dash light that is on when the PTO is engaged was off and the PTO shaft was not turning. That tractor has a series of 3 lever/switches/knobs to fully engage the PTO. They were all...

I have a heavy duty Bush Hog brand 6 foot brush hog. This Spring I mowed down quite a few saplings and thorn trees etc. Most under an 1 inch in diameter, some up to 3 inches or so. It worked well. Today when I took it out it would barely cut 6 or 8 inch high grass. When it got...

I have a Mahindra 4510. Just recently when I want to stop the engine it will not, I have to pull the Stop T handle to get it to turn off. Any thoughts, it is really not a problem doing that but rather it worked the way it used to. Just a comment, a mouse could have been in the...

A neighbor has a L1670 for sale. It has been serviced every Fall by the Kubota dealer. Looks clean. Used to mow a 5 acre lawn, purchased new. Probably nearly 15 years old. Anything special to loo for, pros and cons and general price on such a unit? thanks

A fellow has a Kubota G2000 4 wheel steering, HST with a 54 inch mower deck and 977 hours. Unknown age, condition not abused it appears but has definitely been used. Anything one should know about the same, price, things good and what to look out for etc. to decide on...

My Mahindra 4510 started to get warm, not hot. I brought it back to the barn. Raised the hood and saw fluid all over the engine compartment. Radiator was down about 1.5 quarts on a 8 quart system. Oil was down about 2 quarts on a 8 quart system. The oil pan bolts etc...

The PTO lever on the TC40D will not move so the PTO will not engage/function. I checked and there are no sticks/debris or stones restricting movement. This is my brother's tractor and it has been outside for 5 years and the PTO not used for several. I did spray some penetrating...

I have a Mahindra 4510 built in 2004. Not that old of a machine. Someone posted that the company will no longer supply parts. Is that all parts, major engine parts, filters etc? If that is correct is there an alternate source for parts? Not that I generally need a lot but it...

My brother has a New Holland/Ford TC 40 D diesel hydrostatic tractor with a loader and an aftermarket Curtis cab. It has 2200 hours. He is thinking about selling it. Unsure of a fair price. Any ideas would be appreciated. In western Indiana if that makes any difference. Thanks

I have asked this before but here again. I have a 2004 Honda Rubicon ATV. Runs well when cold but if it gets worked harder or warmed up it loses power, growls and squeals and has no power to move especially up even a slight incline. Let it sit for 30 minutes and it is ready to go again...

I want to replace the starter switch on the 4510. I removed two phillip head screws on the dash and the gauge cluster almost releases and pulls out to give me access but the top of the cluster will not release. I cannot see what is holding it in place. Anyone have any experience or ideas...

I have a Mahindra 4510. I want to remove the gauge cluster to access the starter switch. I removed two phillip head screws and the cluster wants to come out except the top edge will not release. Anyone ever have one out or ideas? Thanks

I was operating my 4510 and stopped it. Would not start soon later. It just clicked a bit like a dead battery. As the battery was about 6 years old I got a new one. Installed it and it would still not start. The ground and connections are clean. When the key is on part of the...

I saw a used TR3 rake for sale. I have not called on it. I would use it for gravel lane leveling and perhaps some seed bed preparation in heavy sod. Any comments on those that might have used the same or is there a better alternative? Thoughts are appreciated. I would used it on...

Anyone relocate the fuel filter on the 4510 to the back to protect it from sapling damage or actually build a shield to protect it in the factory location?

I have a chance to get some concrete that is 1 foot square, with 4 pieces of 5/8 rebar in it. It would span 7 feet over a drive way to let water under. Any idea what those concrete pieces would carry in weight. There would be 9 of them but the tires would ride on just two of them.

I have a 2004 Honda Rubicon. It has a D1, D2 and ESP transmission speed. I do not drive it fast but I have steep hills. What is the best range to use. Also if I pull a disc or cultipacker behind it what range should it be in. thanks

My dealer has a sale on a number of 50 horse Kiotos. All are new with loaders. He has a DK 5010 4 wheel drive with hydrostatic for $21,500, an open tractor. He has an NX5010 with a cab and loader and hydro for $33,500. Geared tractor are $1000 less and the cab is about $7000 over...

Wondering was a cab Case Model CX70 4wd tractor with 1800 hours on it might be worth. Not sure of the year. Thanks

I have a Bush Hog brand model 306 brush cutter. It has the slip clutch. The PTO shaft has a female and male and they will not fit together fully. They only engage about 3 or 4 inches. That makes it too long to fit to the PTO stub on the tractor and even if it did I feel it would be...

I had a bolt come out of my bush hog and one blade came off. The threads are pretty mangled. I have a replacement. Any trick to replacing it by myself. I think I can get the new in and started, unsure how much torque I will need to tighten it down and how to hold the blade to do...

I can get a Woods B106 rotary mower. It is a Cat 2 set up. My Mahindra 4510 is a 45 horsepower Cat 1 tractor. I know the pins can be switched to go to Cat 1 but will the pto shaft be different and will the spacing be too wide for my Cat 1 3point attachment points. Any thoughts or is...

I am considering getting a Woods B106 rotary mower, a six foot cut. I have a Cat 1 45 horsepower tractor. The seller thought it was a Cat 2 mower. Does anyone know for sure? I could change the pins but I think the spacing off the 3 point attachment points would be too wide for my Cat...

I have a heavily cracked/broken stump jumper on my Bush Hog brand Model 502 rotary mower. It is a 5 footer. The replacement part would cost more than I paid for the mower used. Anyone know where there is a company carrying a used one or other ideas. If I cannot find one I will...

I ordered a part on Monday AM for a three point hitch damaged item. The dealer said he would have it sent directly to my house. It arrived Thursday AM. I doubt they had it in stock so I was happy with the speed. I welded the old part just in case there could be a delay. Keeping...

My Mahindra 4510 air conditioner did not cool. A dealership got it to work, recharged it as I understand. Worked well for several months and back to the same problem. Is there a way to inject a dye or a process to see where the leak occurs so this will not happen again? Thanks

I have a Mahindra 4510. The fuel filter is low on the right side of the engine and when bush hogging saplings etc they have hit the filter and damaged it twice. The connections are only pressed in and then leak. There does not seem to be a real way to shield it. ] I saw a...

I have used various type lynch pins over the years. None work too well, in the thick stuff they have come loose and that has caused more than a share of problems. The best are a circular round wire type. One spreads the coil apart and spirals it around. I however do not know the...

My 2005 Honda Rubicon runs fine when it is cold. When it gets warm it loses power. Sometimes the fan comes on and sometimes not, more often not. I think if the fan operated correctly it would not get warm. The radiator is not clogged, good antifreeze etc. I do not think any...

I have a 10 foot wide gravel lane about 2000 feet long. I have 33 and 45 horsepower tractors with 3 points, both 4 wheel drive. What is a good brand name and particular atttachment to level and keep my lane flat etc. I have front end loaders on both tractors also. Thanks

I have a 100 foot nylon tow strap. It is "flat", about 1.5 inches across. It has a small loop on each end. I would like to use it to pull out some logs in a ravine with my 45 hp tractor. I do not want to tear it up. What ideas on what I should use on the one loop end that would...

The left lower side grill on my Mahindra 4510 came loose, fell under the bush hog and got chopped up. Does anyone know where a used and/or new one might be located? I am in western Ohio. Thanks

My brother has a Case 450 bulldozer with an enclosed cab. He wants to purchase a trailer to haul it but cannot find the weight listed in the manual. Does anyone know what it might be? Thank you.

I have a 10 foot wide lane over 1700 feet long that will eventually be over 2000 feet. I have a 33 and 45 horsepower Cat 1 tractor. Would a box blade or angle blade or whatever be the best for light grading and maintaining the lane etc. Any comments, suggestions, reasons would be...

I had planted about 60 acres in the Pheasants/Quails Forever type seeding and 3 acres of pollinators (wildflowers). Some planted in the fall of 2012, some in Feb 2013. Not seeing much yet, I was told it will be June before I see most germinate. Anyone had any experience with these...

I have to put in a 2000 foot, ten feet wide lane. The gravel and trucking could run about $10,000. Is there any decent substitute? If a black top road was ground off would the asphalt give a decent base? Washer run etc. The top soil will be bulldozed out and I would like to...

I have a Mahindra 4510 tractor, 45 horse with MFWD. I am told that it is a rebadged TYM. Does anyone know the equivalent TYM it is? Thanks

I have a Mahindra 4510. It has been said it is a TYM bebadged for sale by Mahindra. Any idea what it would be in a TYM equivalent tractor. It is a cab 45 horse, MWFD tractor with a loader. Thanks

I purchased a used Kawasaki Mule 2510 4wd UTV. The specs call for 22-11 -10 tires on both the front and rear. All tires are Dunlaps, the front are that size and about 60%. The rears are new but 23-11-10. Any problem with this? I do not ride on the road or fast and the only...

I have a Mahindra 4510. The 4 wheel drive lever, although forward in 4wd, does not seem to be engaging the 4wd so it remains in 2wd. Any thoughts on the same before I take it to the repair shop? Thanks

I have a manual front wheel assist Mahindra 4510 tractor. About 45 hp. When I am in 4 wheel drive going down a hill it wants to "freewheel" and gain so much speed the brakes will not hold it and I have to put the front end loader bucket down to slow it down so it does not get out of...

I have a Mahidra 4510. The air conditioning coolant is full, dye was added and there are no leaks. The AC blows cold and the fan works but not strong. With that as a background the cab gets about 20 degrees warmer than the outside air temperature even with the AC on high. This past...

I have a Kawasaki Mule 2510 4 wheel drive. It makes a loud clang and almost lurches when it does. It almost sounds like it will break a gear off of somewhere. Any ideas. I once thought it was the bed was loose but that is not the case. The noise comes and goes but I would like to...

My brother was told his recently acquired used 260 skid loader has a high and low flow hydraulics. He needs to use it with high flow. It there a lever and location to change this? Thanks

I am posting this in several JD sites here for assistance. My brother has a 260 skidloader and was told it has high and low flow hydraulics. He needs high flow, is there a lever to change/adjust the same? Thanks

My brother has a JD 260 skid loader he got recently. He was told it has high and low flow hydraulics. If that is the case he cannot locate any lever to put it in one or the other. What he needs to oprerate needs the high flow. Any ideas/suggestions for him? Thanks

I have a Kawasaki Mule 2510 4wd UTV. It makes a loud bang at times when one is gaining speed, although still very slow. The first time it did that I thought I broke an axle or wheel. It was that loud and almost a sound like metal breaking. I actually stopped to see if there was anything...

I have a Mahindra 4510. I think TYM makes it for Mahindra. It has a TYM ignition key and the engine is made in Korea. Does anyone know what TYM is comparable to the 4510? thanks

I want to remove the doors off my 4510. It looks like I can remove a c clip and the dowel in the hinge and they will come off except for the hydraulic shock on the door. Can the ball be popped out of the socket or should the machine screw/nut that attaches it be removed. Thanks

I had my tractor worked on about an hour away. When I used it, it appears the temperature gauge was not hooked up. I do not want to reload it, an hour each way. I found two disconnected male connections but no female connections. Also two plastic covered coil springs that seem to go...

Comments about the John Deere 4520 and 400 x loader. Any cons/pros thoughts on the same. A neighbor has one for sale and was wondering if that series was as well liked/made as some of the slightly higher horsepower models. Thanks

I have a 4510. Where is it built, the engine and the front end loader and the tractor itself? thanks

My Mahindra's power steering is out because of an orbital steering valve. Anyone know of anyplace that can rebuild/repair the same. I have been advised a new unit is $600 plus labor. Just inquiring. A low hour tractor needing a clutch, pressure plate and this but then I do not know how...

I have water getting into the oil. Trying to find out from the prior owner if it ever got hot. Will be checking for head warpage. It was apart because a valve stuck and bent a push rod. That is corrected and then the leakage was discovered. It is an aftermarket head gasket. Anyone...

My power steering is not working. Does anyone know if they sell a kit to repair the pump or box? Thanks

There are some old parts manuals on ebay for sale. I know nothing about the seller, just thought some might be interested.

I have a Honda Rubicon that when it warms up loses power, has a growling noise and has difficulty getting up a hill because of the power reduction. Any ideas or thoughts. Thanks

There is a 336d for sale in Penn on ebay with no reserve. High hours and it may be tired. I think that company will also deliver around Chicago for extra. Maybe what some are looking for.

I got a good deal on over 100 sheets of 2.5 inch foam to put on the roof of my pole barn. Good if I can get it attached. If I could find 3 1/2 inch cap nails I could nail it to the nailers. I could make my own "caps" out of thin plywood and use regular nails or any special type of...

My 2004 Mahindra 4510, cab 4 wheel drive cab tractor recently barely had enough power to get up the hill while mowing. Actually the engine has plenty of power so I think it could be the clutch. It only has 1070 hours on it but I bought it used at around 900. I have not tried to adjust...

I just got a used 2510 4x4. Anything special to watch for, service etc. I also need to get a service/repair/parts manual. Anyplace special to get those from? Thanks

I have a Honda Rubicon ATV. When it warms up it loses power when attempting to climb a hill. It does reasonably well after that on the flat. I also noticed that the radiator fans are not coming on. Could that be a fuse, an electrical line disconnected, thermostat? Could the problem be...

I need to get a few parts for my Mahindra 4510. I live in Celina, Ohio. What are the nearest Mahindra parts dealers between there and Columbus? Thanks

I broke the fuel filter bowl. I could not find in my manuals the procedure to bleed the line after it is fixed. Also how much torque is the flange given when tightening?

My brother has a MF50. His transmission is "stuck" in first gear, the hi-lo works but he cannot get it out of 1st into any other gear. He changed the transmission fluid he said about 1 year ago, the manual said 27 quarts so that is what he put in. He says the manual does not show a dip...

I had my 4510 idling, the air conditioner was on. I was perhaps 50 feet away and suddenly a loud squeal/squal noise came from under the hood. I ran up and shut it down. I expected to see something caught under the belt or it almost seemed that something locked up and a belt was slipping...

Comments, pro and con, on a John Deere 260 skid loader with 2000 hours. Thanks.

Those of you that have the 260 model, pros and cons and any general comments. Looking at one with 2000 hours. Thanks

I do not know if this is the correct location for this but I wanted to say I had some dealings thru jwcinpk and they could not have been better. He and his father were real gentlemen and helped me out a great deal on a part purchase. I just wanted to thank them here and to let others know...

I just replaced the green coolant in my 2004 Mahindra 4510. I replaced it with DexCool, the orange General Motors coolant. I then read the most recent Popular Mechanics magazine and it said one should never use other than the original color as it can be hard on gaskets, water pumps etc. I...

Two questions actually. There is a grease jerk under the rubber floor mat, the front end loader column plate bolts thru the mat such that one cannot lift it far enough to access the jerk. I could use a rubber knife to slit it which would permit enough room to get to the jerk or how do you...

I admit I just took a quick look but I did not see a drain petcock on the radiator of the 4510. Where might it be or do you just loosen the lower radiator hose? My Yanmar has a block water jacket drain. Ideas/suggestions. Thanks

Two questions actually. My 4510 has a grease port under my rubber floor mat. The front end loader column bolts thru the mat and I cannot lift it far enough to access the zerk. It is thick rubber but I can cut it with a rubber knife and that should give enough lift or other ideas. The...

I have a 4510. It wants to run warm/hot when mowing. This especially occurs if any weed/thistle fuzz debris gets in front of the radiator. I have to clean it often and it does not take much for it to get hot. Anybody else have these problems and cures. The fluid is full and good. I...

Could anyone give me the email address, postal address or telephone number of Construction Equipment Parts Store in or near Humboldt, TN. I think he sells out of Ebay as dmoore4. I would like to contact him/the store and have not been able to come up with any of the above. Thanks

Can someone provide an approximate price on a Kubota B7100 4 wheel drive tractor and accessories, to be sold as a unit? The tractor has 750 hours on it, it is a diesel. No ROPS, thought to be a mid 80's tractor. Unsure if grey market or not. The unit was with a business so the paint is...

I have had someone ask me to try to bet some information on their Kubota 4 wheel drive tractor. It is believed to be a mid 80's tractor, about 18 horsepower, no ROPS, it has power steering. At this time they are trying to get a model number etc. It has a new 1846 QT front end loader by...

Does anyone have a used Honda Rubicon module/hour meter for sale and the price for a 2003? Thanks

Hi: Any idea what a very low hour (under 500) MF 40b backhoe would be worth, this is a pre-1980 model with a cab, 2 wd? Thanks Also any idea what it would weigh?

I hope I am not out of line here asking about the JD Gators on the tractor site but was hoping the JD users could help me out. My 23 year old ATV I believe is on its last legs. I am getting older and am considering a Utility Vehicle like the Gator. I have hills and sometimes snow. Tell...

Any idea of the price of a John Deere 510 backhoe, 2 wheel drive. Solid motor and hydraulics? I unfortunately do not have much more information to offer on it. Thanks

I have a Mahindra FEL 114. How does that compare in lifting, construction etc. with their FEL 112? Thanks

I have had spindle breakage problems with my 336d. I have a front end loader but do not load it heavilly, it is the factory loader. Also now a front wheel seal is leaking badly. Any of you have any similar problems or corrections. I just overhauled the motor and clutch so I do not...

I have a 4wd Mahindra 4510 cab tractor. I also have a Woods/Bush Hog 750 3pt hitch backhoe. Will this fit on my tractor and do I need a subframe or will the Woods 3 pt hitch arms handle the same. I think the tractor is about 45 horsepower, Category 1. Thanks