ROUSTABOUT
Elite Member
- Joined
- Jan 30, 2008
- Messages
- 3,186
- Location
- Luther Willis Hill, AR
- Tractor
- Pettibone, Ford, Massey Ferguson, International, JD, David Bradley, home mades
Just to add. Aerokroil and marvel mystery oil are my go to oils for serious problems. Years ago I found a 3/4" rusty square head bolt with a square nut, buried in the ground, found it plowing. I cleaned it with a soft wore wheel on a washing machine motor. Still have that old motor, at that time it was the only grinder on this road. Then I put the bolt upright in the vise, blacksmith post vise, and sprayed Kroil on it. Kroil seeped through the nut and was on the threads below the nut. Nut was not wet on outside. Deep Creep.Thankyou for that, but it's based on un-sticking several "stuck" old engines.
SR
I do mix a little brake fluid in ATF and use in a squirt oiler. That works too, pretty good. Maybe 1/4 brake fluid to ATF.