rswyan
Super Star Member
- Joined
- May 12, 2004
- Messages
- 13,229
- Location
- Northeast Ohio
- Tractor
- Kubota B2910, Cub Cadet Pro Z 154S, Simplicity 18 CFC, Cub Cadet 782
Good morning!!!!
- Thread starter 300UGUY
- Start date
- Views: 19860559
daugen
Epic Contributor
nope, I'm not a goatee person.
likely won't take the chance and will shave tomorrow morning
likely won't take the chance and will shave tomorrow morning
LS Tractor Owner
Super Member
- Joined
- May 1, 2017
- Messages
- 7,665
- Location
- Edgewood, NM
- Tractor
- LS XG3025 TLB, Previously MT125 TLB, Craftsman GTS6500
You're kidding right? ... just want to make sure....
LS Tractor Owner
Super Member
- Joined
- May 1, 2017
- Messages
- 7,665
- Location
- Edgewood, NM
- Tractor
- LS XG3025 TLB, Previously MT125 TLB, Craftsman GTS6500
Another good day in the shop... got the planks all 1st sanded. Tomorrow they will get cut to the proper lengths, double check the width, and predrill the holes. Then final sand. The dust vac set up worked exceptionally well, no powder anywhere, not even on me! Here's some progress pics...
Attachments
wngsprd
Super Member
Mesmerizing.
LS Tractor Owner
Super Member
- Joined
- May 1, 2017
- Messages
- 7,665
- Location
- Edgewood, NM
- Tractor
- LS XG3025 TLB, Previously MT125 TLB, Craftsman GTS6500
Yes, the person flying is very talented!
txdon
Super Star Member
Right.
I don't know if you can even purchase that type of plane, how does it stop in mid air and go backwards, must be half drone with hidden propellers.
rswyan
Super Star Member
- Joined
- May 12, 2004
- Messages
- 13,229
- Location
- Northeast Ohio
- Tractor
- Kubota B2910, Cub Cadet Pro Z 154S, Simplicity 18 CFC, Cub Cadet 782
57F and clear @ 20:30, headed down to an overnight low of 46F.
Got tube feeders refilled and recycle can brought down from the road.
I changed plans - due to gusty winds - and skipped catch basin work and trying to get ready to sow grass seed by west planting bed. Did get Stihl blower refueled though. Winds supposed to drop-off on Saturday, so that's when I'll clear the leaves off and get it seeded.
Cleared off the area up in the compost/wood lot that I have used to stockpile screened soil with the box blade, screened 6 bucketloads of compost, and then started a new pile in the cleaned off area. Also hauled up a bucketload of debris that was down by the southeast planting bed and dumped it into the compost pile.
Took sander around back and brought out the sawhorses and worked on sanding the barn owl nest box. Trimmed off the larger overlaps with the jigsaw. Should be able to get the sanding finished up on it tomorrow ... then BLO.
Got support brace cut for second squirrel feeder and got that glued and screwed onto the perch board.
Going to go down here in a minute and run some screws into the other part of it and put more BLO on the first feeder.
Hope everyone had a great day ... :thumbsup:
Got tube feeders refilled and recycle can brought down from the road.
I changed plans - due to gusty winds - and skipped catch basin work and trying to get ready to sow grass seed by west planting bed. Did get Stihl blower refueled though. Winds supposed to drop-off on Saturday, so that's when I'll clear the leaves off and get it seeded.
Cleared off the area up in the compost/wood lot that I have used to stockpile screened soil with the box blade, screened 6 bucketloads of compost, and then started a new pile in the cleaned off area. Also hauled up a bucketload of debris that was down by the southeast planting bed and dumped it into the compost pile.
Took sander around back and brought out the sawhorses and worked on sanding the barn owl nest box. Trimmed off the larger overlaps with the jigsaw. Should be able to get the sanding finished up on it tomorrow ... then BLO.
Got support brace cut for second squirrel feeder and got that glued and screwed onto the perch board.
Going to go down here in a minute and run some screws into the other part of it and put more BLO on the first feeder.
Hope everyone had a great day ... :thumbsup:
txdon
Super Star Member
With new Big Blow?
rswyan
Super Star Member
- Joined
- May 12, 2004
- Messages
- 13,229
- Location
- Northeast Ohio
- Tractor
- Kubota B2910, Cub Cadet Pro Z 154S, Simplicity 18 CFC, Cub Cadet 782
Nope ... just the Stihl.
The area that needs cleared off is between that west planting bed and the tree line on the west side of the house ... so it's tight/confined - only about 12' wide or so and pretty small.
Probably won't take me but ten minutes or so.
Jim Nelson
Platinum Member
I've had a lot of cramp problems and after poo-pooing the idea for a long time I finally tried the mustard thing that has been talked about before and it works like a charm for me. When I first started I had the Grandkids snag me a few of the packets at the burger joint and after seeing how well it worked my wife found some on Amazon and I keep a small bowl on my night stand. Worth a try and yess I tried the Dr. way first with no help at all. Just the plain old yellow Kraft mustard.
mostly_gas
Super Member
Good evening all. 48F for the start, mostly clear sky and light breeze. Wind kicked up quickly 15-25, More high clouds with heavy clouds to east, and high temp 74F. Men's Meeting this morning, then gopher harassment, used twice as much caster oil and dish soap to 1 gal of water, and found a tunnel with no dirt around it flushed a lot of water down it. bike ride, lunch, walk with wife, nap, then wash truck. Still need to clean windows and vacuum it.
Covid update: Cooke unchanged, Montague 314 confirmed cases, 16 active cases, Grayson 2862 confirmed cases, 209 active cases.
Roy sorry to hear about your leg.
Eric did you remember the capitol of Bolivia?
Buppies how much sulfur does it take?, thanks for suggestion.
Mike that is a lot of deer for 1 truck. forward progress is good on the porch
Drew sounds like a full day, good luck with your wood working.
Luther black ice shows up at the most inconvenient time
Buppies other than parking at the wrong place hard to figure how the car caused anything.
Bill hope you have a successful day
Thomas slow motion is that a cross between putter and conserve energy?
Ron, sorry about hearing loss and issues with front office/ insurance rules. nice sunrise.
Billy I could never stay up that late, watched 20 minutes after posting last night then went to bed.
RNG much progress I see.
PJ glad you are having nice weather, will get to see it Saturday
Randy good to hear arm is starting to heal
Ted hope you can recover from all that sanding.
Dennis hope you can work around the office staff.
David you think they would have things working by now hope you get your inside day.
Roy good luck getting it to work.
RS long list today.
Don, was trying to figure out how the plane made some of those moves, where controls etc were. :confused3: Good to hear dental work now permanent
Drew sorry about the short beard life.
RS maybe wind will blow some leaves away?
Jim glad mustard work for you, have had some success myself, I do make sure I am hydrated first
prayers for all, especially Jay/Peg, Kyle's daughter, RNG/fire, Ron's son and Country/elections
stay safe and healthy you all
Covid update: Cooke unchanged, Montague 314 confirmed cases, 16 active cases, Grayson 2862 confirmed cases, 209 active cases.
Roy sorry to hear about your leg.
Eric did you remember the capitol of Bolivia?
Buppies how much sulfur does it take?, thanks for suggestion.
Mike that is a lot of deer for 1 truck. forward progress is good on the porch
Drew sounds like a full day, good luck with your wood working.
Luther black ice shows up at the most inconvenient time
Buppies other than parking at the wrong place hard to figure how the car caused anything.
Bill hope you have a successful day
Thomas slow motion is that a cross between putter and conserve energy?
Ron, sorry about hearing loss and issues with front office/ insurance rules. nice sunrise.
Billy I could never stay up that late, watched 20 minutes after posting last night then went to bed.
RNG much progress I see.
PJ glad you are having nice weather, will get to see it Saturday
Randy good to hear arm is starting to heal
Ted hope you can recover from all that sanding.
Dennis hope you can work around the office staff.
David you think they would have things working by now hope you get your inside day.
Roy good luck getting it to work.
RS long list today.
Don, was trying to figure out how the plane made some of those moves, where controls etc were. :confused3: Good to hear dental work now permanent
Drew sorry about the short beard life.
RS maybe wind will blow some leaves away?
Jim glad mustard work for you, have had some success myself, I do make sure I am hydrated first
prayers for all, especially Jay/Peg, Kyle's daughter, RNG/fire, Ron's son and Country/elections
stay safe and healthy you all
sodamo
Super Star Member
- Joined
- May 20, 2004
- Messages
- 18,475
- Location
- Big Island, HI
- Tractor
- Bobcat CT4545 LS XR4140H (Mine) BX2380 (wife’s)
Turned out not to be an inside day after all, just later start.
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 24,646
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
2020-11-05, 0301
36 right now...high in the mid-60's today...
Leg isn't hurting or cramping as much...think I'll try that mustard remedy
36 right now...high in the mid-60's today...
Leg isn't hurting or cramping as much...think I'll try that mustard remedy
Buppies
Super Star Member
- Joined
- Oct 26, 2011
- Messages
- 12,571
- Location
- SouthWestern Virginia
- Tractor
- Kubota L5240 EX mark 60 in 29 hp Toro 60inch Z Master 21 inch walk behind Polaris 900 hunter edition 30in toro walk behind
45 high of 70 today another nice one on tap
Mostly I have been told most all of bag, for stronger effect light newspaper with sulfur in it at the hole entrance pest will leave. Works well for snakes too
Prayers for Jay and wife Kyles daughter and sons finger, all others our Country
Mostly I have been told most all of bag, for stronger effect light newspaper with sulfur in it at the hole entrance pest will leave. Works well for snakes too
Prayers for Jay and wife Kyles daughter and sons finger, all others our Country
mpham
Veteran Member
Morning all!
45 here going to a sunny 58/59.
Rain gutter install went well at my sister's after a two day wait for wet weather.
Going to try and start on the paving project again today. Hopefully will have no more knee issues.
Looks like we have a nice stretch of good weather coming up so I will try to get a final cleanup of branches and leaves around here and the apartment house.
Still need to change over the mower to the blower at the apartment location.
Paver project is first though. Plow digs into the ground all winter in that area so I need to get it finished before snow flies.
Hope everyone stays safe and healthy!
45 here going to a sunny 58/59.
Rain gutter install went well at my sister's after a two day wait for wet weather.
Going to try and start on the paving project again today. Hopefully will have no more knee issues.
Looks like we have a nice stretch of good weather coming up so I will try to get a final cleanup of branches and leaves around here and the apartment house.
Still need to change over the mower to the blower at the apartment location.
Paver project is first though. Plow digs into the ground all winter in that area so I need to get it finished before snow flies.
Hope everyone stays safe and healthy!
daugen
Epic Contributor
good morning all
looks like most of us on East Coast are enjoying really nice weather, no rain here until next Wednesday.
currently a chilly 35 out, foggy morning, but clearing out and going up to 70 today in sunshine.
Roy, first time I heard of using mustard for cramps was right here, years ago, someone who kept a bottle of mustard in cab of tractor and had a teaspoon or two
when needed. Not sure I could eat it straight, good reason for a hot dog or burger to spread it on. I made salmon last night with a mustard glaze, very good.
friend coming over at lunchtime with my hemmed curtains, will be nice to get them up. Meanwhile I have some trips down to basement with boxes. Good exercise going up and down the stairs but have to do it carefully.
picked up clothes at drycleaners, boy I need to find another one with lower prices. I was paying 1.75 a shirt and 3.50 for pants in NC. Just about gagged when I got home and read the labels, 2.80 per shirt and 7.10 for pair of pants. That's just nuts. I don't care if I have known these folks for 50 years, not paying that for a pair of pants I'll spill something on almost immediately.
Good reason to wear blue jeans and keep the nice pants for church and other occasions. Nice to be retired and not have to "dress up" every day.
Phil, I'm sure you mentioned it before, but what are you paving? Not something most of us have the equipment for.
Sitting here enjoying my coffee and still pondering whether to shave this morning. I really like having a beard to keep me warm during the winter.
Just one more reason Covid is a pita. Maybe if I keep it extra short...?
looks like most of us on East Coast are enjoying really nice weather, no rain here until next Wednesday.
currently a chilly 35 out, foggy morning, but clearing out and going up to 70 today in sunshine.
Roy, first time I heard of using mustard for cramps was right here, years ago, someone who kept a bottle of mustard in cab of tractor and had a teaspoon or two
when needed. Not sure I could eat it straight, good reason for a hot dog or burger to spread it on. I made salmon last night with a mustard glaze, very good.
friend coming over at lunchtime with my hemmed curtains, will be nice to get them up. Meanwhile I have some trips down to basement with boxes. Good exercise going up and down the stairs but have to do it carefully.
picked up clothes at drycleaners, boy I need to find another one with lower prices. I was paying 1.75 a shirt and 3.50 for pants in NC. Just about gagged when I got home and read the labels, 2.80 per shirt and 7.10 for pair of pants. That's just nuts. I don't care if I have known these folks for 50 years, not paying that for a pair of pants I'll spill something on almost immediately.
Good reason to wear blue jeans and keep the nice pants for church and other occasions. Nice to be retired and not have to "dress up" every day.
Phil, I'm sure you mentioned it before, but what are you paving? Not something most of us have the equipment for.
Sitting here enjoying my coffee and still pondering whether to shave this morning. I really like having a beard to keep me warm during the winter.
Just one more reason Covid is a pita. Maybe if I keep it extra short...?
daugen
Epic Contributor
Cloth face coverings and surgical masks do not require a seal to work, so beards and other facial hair should not impact their effectiveness as long as the face covering is worn properly. The coronavirus is spread through respiratory droplets, which originate from a person's respiratory system
Is Your Beard Putting You At Risk For The Coronavirus? | The Manual
ahhh, good. No shaving this morning. :thumbsup:
Is Your Beard Putting You At Risk For The Coronavirus? | The Manual
ahhh, good. No shaving this morning. :thumbsup:
riptides
Super Star Member
48 outside this AM. Heading to just short of 70. Nice.
Picked up the pace on the porch yesterday. More of the same today. Need to run back to the supplier. One strand of J-Channel looks to be from another manufacturer and is just short of being as wide as the others. Of course! That's two hours gone today.
On the mask and beard front, I always wear both. Trim the beard, not the mask. LOL. Find a nice mask that covers your nose and bridge it tight there. If you wear glasses and they fog, it is not tight enough. Me, no issues with a mask. But you have to find the "right" one.
Hope all have a good day today. Be safe.
Picked up the pace on the porch yesterday. More of the same today. Need to run back to the supplier. One strand of J-Channel looks to be from another manufacturer and is just short of being as wide as the others. Of course! That's two hours gone today.
On the mask and beard front, I always wear both. Trim the beard, not the mask. LOL. Find a nice mask that covers your nose and bridge it tight there. If you wear glasses and they fog, it is not tight enough. Me, no issues with a mask. But you have to find the "right" one.
Hope all have a good day today. Be safe.
Here are some similar links:
