I recently inherited a YM195D from my grandfather and I believe he did some modifications to the three point hitch control and I would like to return it to its original state. If my understanding is correct, when the control is moved to the up position it should rise until the position rod moves the control back to center. The way it is right now when you move the control lever it stays wherever it is put and if left in any one position too long it starts to make a "hissing" sound. Does anyone have any suggestions?
3-Point Hitch YM195D
- Thread starter zach88
- Start date
- Views: 760
I believe the 195 should operate as your last description other than the hissing sound. That hissing sounds like a relief valve going off. Might read through this thread. https://www.tractorbynet.com/forums/yanmar/425670-ym240d-3-point-stuck-up.html
California
Super Star Member
- Joined
- Jan 22, 2004
- Messages
- 16,685
- Location
- An hour north of San Francisco
- Tractor
- Yanmar YM240 Yanmar YM186D
YM240, should be the same thing. My loader is plumbed in series just ahead of the 3-point using the diverter block that is OEM on US Yanmars. Note you need to move some plugs around in the block to do this:
From YM240 Manual
The thread where I first posted those:
https://www.tractorbynet.com/forums/yanmar/221299-loader-plumbing.html#post2531298
Another post with a YM240 hydraulic diagram.
https://www.tractorbynet.com/forums/yanmar/220599-hydraulic-system-diagrams.html
Thread with photos of the 3-point lever.
https://www.tractorbynet.com/forums/yanmar/353947-3pt-hitch-lever-adjustment.html#post4396170
Last edited:
