Everything Attachments

Status
Not open for further replies.
   / Everything Attachments #1,221  
   / Everything Attachments #1,222  
Well Ted I was part of your big March with a 78" Cat 1/II box grader. A little over 3 weeks and shipping was easy to a semi local freight terminal. My 3930 and I are going to start cleaning up the road. I might have to get a hydraulic top link for the beast though. Torn betwixt a Ct I or Cat II. I have Cat II arms with Cat 1 balls currently installed to suit my bush hog...oh well more money to spend.

Sweeeet! :cool2: One heck of a box blade, man.
I'd probably lean toward a Category I toplink because more attachments, even larger ones, come with Cat I holes in the toplink dept.
Many Cat II tractors have Cat I toplinks from the factory, which I really do not understand, but it's been like that for a long time.
It would be interesting to hear more opinions.
Travis
 
   / Everything Attachments #1,223  
Sweeeet! :cool2: One heck of a box blade, man.
I'd probably lean toward a Category I toplink because more attachments, even larger ones, come with Cat I holes in the toplink dept.
Many Cat II tractors have Cat I toplinks from the factory, which I really do not understand, but it's been like that for a long time.
It would be interesting to hear more opinions.
Travis

My LS XR4155HC came with CAT 2 top link and lower arms. Tractor Supply sells inexpensive bushings for both top link and lower arms to go from CAT 2 to CAT 1. This gives me the ability to hook to both CAT 1 and CAT 2 implements easily.

When I ordered my hydraulic top and side link cylinders, from Brian, he suggested that same top cylinder could be used with a CAT 2 rod end. I’ve no regrets.

If you only have CAT 1 implements and never plan on larger then stay with CAT 1 rod end on top cylinder.
 
   / Everything Attachments #1,224  
Has Travis mentioned how much they're expecting prices to increase with Trump's trade war (or whatever you want to call it). Does EA expect a 25% increase as others have suggested?

Why would you even think that EA will increase attachment prices 25%?
Do you really expect ETA's labor/assembly, shipping costs, and overhead, to ALL also increase by 25%.
Current US made steel cost, is about $800 per ton. If US made steel rose to $1000 per ton (+25%), the steel cost in a 500 pound attachment would rise from $200 to $250.
A $50 steel increase for a 500 lb. attachment/implement, simply does not equate to anywhere near a 25% cost of production increase, or a 25% sale price increase.
 
Last edited:
   / Everything Attachments #1,225  
Why would you even think that EA will increase attachment prices 25%?
Do you really expect ETA's labor/assembly, shipping costs, and overhead, to ALL also increase by 25%.
Current US made steel cost, is about $800 per ton. If US made steel rose to $1000 per ton (+25%), the steel cost in a 500 pound attachment would rise from $200 to $250.
A $50 steel increase for a 500 lb. attachment/implement, simply does not equate to anywhere near a 25% cost of production increase, or a 25% sale price increase.

Sounds like an accurate assessment to me!
Travis
 
   / Everything Attachments #1,226  
Back to the top link discussion, if your top link is too short you can use a top link extender:

link extnd r.jpg


link extender r.jpg
 
Last edited:
   / Everything Attachments #1,227  
Why would you even think that EA will increase attachment prices 25%?
Do you really expect ETA's labor/assembly, shipping costs, and overhead, to ALL also increase by 25%.
Current US made steel cost, is about $800 per ton. If US made steel rose to $1000 per ton (+25%), the steel cost in a 500 pound attachment would rise from $200 to $250.
A $50 steel increase for a 500 lb. attachment/implement, simply does not equate to anywhere near a 25% cost of production increase, or a 25% sale price increase.

The proposed 25% tariff is for foreign made steel?
 
   / Everything Attachments #1,228  
The proposed 25% tariff is for foreign made steel?

Agreed! The 25% price increase will be for foreign made steel.

So..... do you not think that US steel manufacturers will raise their prices to match those of imported steel?
I certainly do!
It is the natural/desired marketplace reaction to higher import steel pricing, to strengthen the US made steel industry.
 
   / Everything Attachments #1,229  
Why would you even think that EA will increase attachment prices 25%?
Do you really expect ETA's labor/assembly, shipping costs, and overhead, to ALL also increase by 25%.
Current US made steel cost, is about $800 per ton. If US made steel rose to $1000 per ton (+25%), the steel cost in a 500 pound attachment would rise from $200 to $250.
A $50 steel increase for a 500 lb. attachment/implement, simply does not equate to anywhere near a 25% cost of production increase, or a 25% sale price increase.

No need to get your panties in a bunch! :thumbsup: :drink:
Please re-read. I made no such prediction. I asked if EA had made their estimate public...
 
   / Everything Attachments #1,230  
I haven't heard any sort of prediction from Ted.

I like thought of those companies which peddle 100% chinese "stuff"(to be nice) having to raise prices. Something needs to cause a decline on said "stuff" like that IMO.
It's unfortunate that it will cause prices of Quality USA Made products to rise.
Travis
 
Status
Not open for further replies.
 

Tractor & Equipment Auctions

2016 WESTERN STAR 5700XE TANDEM AXLE SLEEPER (A51219)
2016 WESTERN STAR...
2008 FORD F-450 (A50854)
2008 FORD F-450...
2022 Case IH 8250 4WD Combine (A50657)
2022 Case IH 8250...
SDLG WHEEL LOADER FORKS MAST W/ 48" FORKS (A51242)
SDLG WHEEL LOADER...
2019 CATERPILLAR 308 CR EXCAVATOR (A51242)
2019 CATERPILLAR...
2013 PETERBILT 367 (A50854)
2013 PETERBILT 367...
 
Top