M7040 Disk and cutter size???

   / M7040 Disk and cutter size??? #11  
I run mine with the loader on and if need be I can always stop and add rocks for additional ballast. No shortage of them around here!

I have considered getting a front weight set for some of the field work to save wear on the loader and improve visability.
 
   / M7040 Disk and cutter size???
  • Thread Starter
#12  
The 7040 will be 4wd with cast wheels, filled tires and mayb a couple wheel weights if needed. It will have a loader but wont be on it most of the time because of the length it adds to the tractor.
 
   / M7040 Disk and cutter size??? #13  
The 7040 will be 4wd with cast wheels, filled tires and mayb a couple wheel weights if needed. It will have a loader but wont be on it most of the time because of the length it adds to the tractor.

With the QA for the bucket it is easy to drop the bucket and not be too concerned about the added length. Not sure if a weight set will fit on the front with a FEL however. Sounds like you have things figured out anyway.

A set of forks for the QA will likely find many uses.
 
   / M7040 Disk and cutter size??? #14  
My 7040 has the cast wheels, loaded R1's, and bolt on wheel weights. The rear is ballasted well but the front gets light unless the loader is on, when using some of our larger mounted equipment.

I typically have to add more rear weight to lift anywhere near the loaders upper load limit. (usually just mount the 6' tiller to the 3pt)
 
   / M7040 Disk and cutter size??? #15  
From all I've seen the front weight set will not fit with the FEL mounted.
 
   / M7040 Disk and cutter size??? #16  
From all I've seen the front weight set will not fit with the FEL mounted.

I haven't tried it, but when we bought our M8540, we were told the weights would not work with the FEL. I may have my son fab something up to add a little weight if needed. We use a pull type cutter, so the weight has not been an issue so far.
 

Tractor & Equipment Auctions

2018 GENIE GTH-636 TELESCOPIC FORKLIFT (A51242)
2018 GENIE GTH-636...
2018 JLG 1644 4x4 15,600lb High-Capacity Rough Terrain Telehandler (A49461)
2018 JLG 1644 4x4...
Quick Attach Skid Steer Quick Claw Grapple Industrial Grapple Rake (A51039)
Quick Attach Skid...
2020 JLG 1732 16,755lb 4x4 High-Capacity Rough Terrain Telehandler (A49461)
2020 JLG 1732...
4- 6 DRILL COLLARS (A50854)
4- 6 DRILL COLLARS...
2017 terex warrior 1800 screener (A50322)
2017 terex warrior...
 
Top