Grading Rear Blade for BX2350

[Goldwing]

I have an opportunity to pickup a 7' woods rb700 blade and was concerned this would be too big for my tractor.
Mostly use for snow removal and light grading.
This blade has tilt, offset and foot pads. Used very little.

Opinions?

 

[zionview]

I had a 7 foot that I used with 54- and 64HP tractors. I have a BX2200 and I wouldn't want any more than 4.5-5 foot, and a lighter built one at that.

 

[LBrown59]

I have an opportunity to pickup a 7' woods rb700 blade and was concerned this would be too big for my tractor.
Mostly use for snow removal and light grading.
This blade has tilt, offset and foot pads. Used very little.

Opinions?

That's either a foot to long on each end or 2 feet to long in the middle.
On the other hand it may be 2 feet to long on one end or the other..

 

[Renob]

I have a 5 footer that I use on my BX24, which works perfect. A 7 foot backblade in my opinion, would be too big.

 

[Goldwing]

Thanks for all your input. I did not want to pass up this deal if you all thought it would fit the tractor.

 

[zionview]

Got torch?