I have an addition to the fleet, a 1986 Ford 4610. I took a ride to look at it yesterday and decided I had to buy it today. I bought it from the original owner (still had bill of sale from May...

I bought a 4610SU a couple of years ago. The rear tire tracking was similar to this 4610 this when I bought mine: When I put new tires on it, I experimented with the rim/center disc...

Evening TBN. In the process of closing on 80 acres, about 30 of which will need to be mowed until we build there in 5 years or so. Property is about 45 minutes away I currently have a 1960...

I went to start the engine and saw smoke coming from starter area. Visual inspection did not reveal anything. So I tried starting again and could hear starter still engaged. The solenoid may have...

First post on here and also my first tractor although I've been around farms all my life. The tractor is a 1989 Ford 4610 with a Westendorf TA-25 loader. 3500 hours, but it was used for most of...

Looking for ideas on this. Engine cranks very fast but has a slight miss sensation that translates to vibration around 1600 rpms. I replaced injectors but didn't change anything. Does this...

I posted a thread headed "quick drop valve" but the issue is my 4610 TPH will not move. Do the hoses going to the loader have to be hooked up for the TPH to work. The pto works fine and I changed...

Anyone have an idea of what one of these is worth? Tractor has about 950 original hours and looks great. Drives like a new one and front end is very tight. All original and no aftermarket...

I've been having a starter problem for a while now. I get a nothing or a click then nothing while trying to start. This was intermittent as the problem would clear itself. Thursday it happened...

Hello all, I would like to know points to look for on a Ford 4610 or 6610 4X4 FEL. That is what are the common problem areas on these tractors? For example,Does the manifold have a drip hole to...

I am looking at purchasing this tractor, but don't know which 4610 it is. Can someone help identify it? It says SU on the side, but looks like LCG tires. Thank you.

Well, I thought I finally had my 4610 in good running condition ( prior history: Burned Valve, Piston Issue), but a new problem developed this week. I was mowing with a rotary cutter and thought...

Hi my ford 4610 has trouble starting off in gears higher than low one i adjusted the biting point on the clutch but it didnt do anything any ideas?

A couple of months ago I bought what I believe to be around a 1988 - 1990 (still have not located s/n) Ford 4610. Both my brother and I took it for a test spin and did not notice any problems...

As the title states the lift or pick up arms will leak down and you aren't able to set at a constant height. Any thoughts?

Sometimes my steering has like a drag. Kind of a hard spot. Its in no certain spot. might be any turning left, right going in coming out? When my RPM's are up the problem isn't there as much...

Hey guys new to the forum but have been reading awhile I have a problem with my power steering. It's leaking like crazy where the arm connects to shaft on the left side of the tractor. I think...

My neighbor has a 4610, and we're trying to fix a leak on the top of the steering box. We replaced the top seal twice, and the shaft looks good. On closer inspection, the fluid is not leaking...

Found a Ford 4610 w/6' foot bush hog yesterday. It has 1662 hours and runs good. It is the 1984 model. Body is in good shape, tires are 85%, and the bush hog has not been used much. The price...

I bought the tractor last year and have been very happy with it. However, the power steering has had a slight leak from the start and I'm hoping for some help getting it fixed. First question...

I have an '81 Ford 4610 with hydraulic couplers that are leaking. Does anybody know if these are generic type couplers or or if I can replace them with an ordinary 1/2" quick disconnects(qd's)...

I just acquired a Ford 4610 3 cylinder diesel. This came our of an estate sale and has sit for approximately 1 year. I find that it is extremely hard to start in temperatures <20 degrees F? Any...

Dear all, Quick question, regarding a Ford 4610 II this time. Basically, what lube's and oils go where, and how much? Where are the drain holes, level indicators, etc? Particularly interested...

Thought I'D post this here since it is a Ford issue. Today I had an unusual electrical problem. First start of the day. I turned the key to start and engine made an attempt to start but did not...

I wanted to share a recent experience with my 1989 Ford 4610 FWD: For the past five years or so I've had a very slow power steering fluid leak. I could see a very small amount of fluid...

I'm looking at 1985 4610 mfwd syncromesh. I'd much prefer the constant mesh tranny as thats what I've already got with my 5000 and 5600. What are folks experiences with that transmission...

I have a ford 4610 with the deluxe rear remotes and auxiliary engine mounted hydraulic pump. I currently have my loader plumbed into the rear remotes but looking to upgrade the loader controls to...

I bought a Ford 4610 last week and am having trouble locating the serial number. The tractor has been repainted and the ID plate on the inside of the hood is missing. Per TractorData.com and a...

Does the transmission use gear oil or is it utf that meets the ford 134 requirements? Also the rear diff uses the 134 fluid correct? Thanks again

The fuel gauge does not work. The needle stays at or below the empty mark with the off. When you turn on the key the needle will move passed the empty mark. Took the instrument panel/gauges out...

I have a Ford 4610 Tractor for which I was never given the manual by the previous owner. Is there an electronic copy I cana print or does any one have one they do not need or how can I get one...

So my left rear link has got to where it won't stay engaged. It pops out to the extended position when using almost any implement now. Has anyone else had this happen? I took them both apart...

I need to replace the fuel filters on my 1989 ford 4610 diesel tractor. I can see the part number on the filter on the right but the part number has worn off the filter on the left. I was told...

Hi there. I have been renovating a Ford 4610 and after completing all the engine and electrics refurbs I drained and replaced hydraulic oil, filters and rebuilt the control valve with new Ford...

I need to replace the fuel filters on my 1989 ford 4610 diesel tractor. I can see the part number on the filter on the right but the part number has worn off the filter on the left. I was told...

I am looking at three tractors to mow about 60 acres with a brush hog. A Ford 4610 3.3 liter diesel with 1800 hours for $4800, a Deere 1250 2.3 liter diesel with 5500 hours for $4000, or a...

I have this old (new to me) 4610 I’m going through and not sure what I’m looking at here. Browsing parts diagrams online hasn’t helped either I believe it to be an auxiliary belt driven hydraulic...

I have a 1985 ford 4610 that hasn’t been run much over the last year or two. I was using it today and i reved it up to about 2000 rpm and now it is stuck there. It will not idle down. I pulled the...

Any idea why back lift only works at very high rpm? Have changed filters and that had no effect.

I have a Ford 4610 4WD that I am trying to mount an old GB loader to. This tractor never had a loader so I want to make sure the mount points are sufficient. Are any of these ok for the mid mount...

I went to Pennsylvania for 3 weeks. When I got back my place really needed brush hogging. So I went to the barn to get the tractor and the battery was totally dead. Strange because it is...

I have just swapped my trusty and rusty 4600 for a 4610. I need to sort out various niggles (like a fuel gauge that doesn't work - you can't see down the filler like you could on the 4600 - and...

I have searched but I was not able to find much info on the Ford 4610 tachometer cable. So I write this post. It may help someone. The first time I replaced the tach cable it was an easy thing...

My 4610 SU currently has one set of remotes and a selector valve that allows me to either use the remotes or the 3 point hitch. I plan on hooking up a joystick that would allow me to operate two...

Well I been looking for a bigger tractor and everything that I looked at has been high dollar junk. So yesterday I purchased a Ford 4610 with a Big Bee L660 bush hog and a New Holland 56 hay...

Hello, I have just bought a Ford 4610 with a local New Zealand quick connect loader on it. Went to remove the loader today. Probably the first time in 10 or more years at a guess and the hose...

I am looking to purchase my first tractor and do not have much knowledge in this department. Anyhow, I have come across a clean Ford 4600 series II tractor for sale in my area and would like some...

Hi, greetings from Norway :) I have a Ford 4610(May, 1984) that I bought a couple of years ago. It had a defective tachometer wire from day 1 that I recently fixed. After this I have a...

Hi All I have a loader for my refurbed Ford 4610 and I'm now starting to refurb. I want to add pallet forks to increase usability on the farm. When I'm looking for forks, what type of connection /...

I just got this Ford 4610 3-cylinder diesel tractor. It has wiring issues from previous owner - they removed the ignition switch. Also have some questions about operating it. The PTO lever. All...

I have an 84 Ford 4610 diesel. Does it have a fuse block? I am in the process of painting it and painted the fenders and reinstalled tonight. None of the lights worked but I was getting...

Is there a way to soften the hydraulic engagement of the PTO on a FORD 4610 with independent PTO, keep shearing rotary cutter shear pins.

ok i have started the process to try and get a v5 (not sure if you have it in US but here in the UK it is basically the document that shows that you own the vehicle etc and is a legal requirement...

I just got a 1981 Ford 4610 3-Cylinder tractor without a cab. Previous owner removed ignition switch and was "hot wiring" it to start it. Been working on figuring out the switch and what connects...

I am adding aux. hyds to a 1984 4610. I put on an adapter plate and ran hoses to a single spool valve.The plate is stamped with a"P" for pressure side.I hooked it to "in"port on spool valve.I...

I知 trying to figure out what temperature my tractor is supposed to be running at?? When I am mowing in thick grass for about 10 minutes the gauge reaches the red line. I used an ir temp gun and...

I need some advice on a muffler for my Ford 4610. The existing muffler does not have any holes in it but is extremely loud. You may not think that is a bad thing but when you mow for 3 or 4...

I have an 88' Ford 4610 with dual rear SCVs. One or more of the outlets are leaking and I need to know if they can be rebuilt or serviced. Here is the pic of the unit. It has the numbers...

Hi everyone, I am a new poster here but have been reading the forums for several years. I am hoping some of you smart guys can help me with a few questions. A few years ago I bought a 1983 Ford...

Hi, I have a 1982 Ford 4610 3-cyl diesel tractor that came with a front end loader (Ford 776A Loader). The previous owner damaged the two lift cylinders and they may not be repairable. The OEM...

I have a Ford 4610 deisel with a power steering leak at the steering column. I am going to start by replacing the upper seal. The manual talks about using a gear puller to take the steering...

I bought a ford 4610 at auction that came from a county road dept. I've found out there is 3 models of this tractor.One model is "highway". I think this might be mine as it does not turn sharp at...

We have a Ford 4610 with a cut-down ROPS. I don't trust it. I want to get rid of it and replace it with a proper foldable ROPS. Any ideas where I could purchase one?

WTB Ford 4610-4630 SU, low hours and sheltered rcncman@aol.com or 336-906-3113. Trinity, NC 27370

I bought a 1984 Ford 4610su last spring and serviced everything except the hydraulic fluid and filter. I have been pricing fluid and there is a broad spectrum in price. I didn't get a service...

I have a Ford 4610 with an Allied loader. The single rear remote runs the loader, I keep the remote lever tied back to run the loader, or return it to the center to use the three point lift. I...

Good morning have some problema with the wiring system , repair the generator but still donｴt charge . }all the wiring sustem is a mess , need to rebuoilt it thnak

I have never owned a diesel. I want to change the engine oil in my 1984 Ford 4610. Where do I refill it at? And don't say the the dipstick hole:laughing:

I want piston and ring of FORD 4610, 3 cylinders with at piston with3 ring thank you

Hi I have a Ford 4610 II that has oil coming out of the middle of the steering wheel. I bought a new seal and changed it but after a few hour of operation the leak started again. I am not a...

The voltage regulator on our 1981 Ford 4610 went out on us and overcharged the battery,ruining it. I went to our local auto electric shop and the owner had a voltage regulator that attached...

Ford 4610 3 cyd diesel infomation. I was lucky enough to be gifted a Ford 4610, Looking for a rebuilt engine, anybody know how i can get one. Thank you for your time.

Hey Everyone, just reaching out to see if others have more experience with this tractor than I do. We picked up a 84 Ford 4610 2900 hours with a disclosed head gasket problem from the seller as...

I purchased a ford 4610 last year and love the tractor. Our veggie farm does alot of transplanting and I noticed on new hollands site they have a creeper gear box addon for this model as well as...

besides the remote hook ups that are controiled by valve under the front of the seat, is their any were else to get hooked up to the pressurized side of the hyd sys.

Need help with my 1985 Ford 4610. Had coolant leaking into the crankcase. Thought it was a bad head gasket. Turns out I have a leak in one of the cylinder walls. This model does not have...

I shorted the alternator output lead and the entire tractor is electrically dead. Where is the fusible link located? I have the Ford shop manual, not even a mention of it. It shows up on the...

I would like to have some more length on my front wheels. Don稚 need much to center up the front wheels with the back wheels. The back wheels rims are reversed and are at a wide track. The front...

I can't get the drain plug to come out. Should I heat it or will I just start the whole thing on fire?!! If I can't get the plug out where is the next best place to drain the fluid?

I bought a 1984 ford 4610 2 wheel drive at auction.It doesn't turn sharp at all like normal tractor .If I screw out the steering arm it's just gonna turn sharper one way and less the other (I...

I need a little direction on where to start looking why my thp will not work. I got this tractor after it sat for years on end. I had to get the motor rebuilt and am in the process of cleaning and...

Due to injury to both shoulders, climbing up on my tractor has become an issue. I’m trying to minimize any additional injury. I’ve been using a wooden bench as a step up. Then kick it out of the...

I just got my Ford tractor. I’m not sure if it’s considered vintage or not but I’m looking for a good manual on it. My diesel pump is leaking and I need to be able to repair it myself. The I&T...

I found a local CL add for a Wallenstein Chipper/Shredder BX92r. Says it has <10 hours on it. Pictures aren't great, but it does show hydraulic feed. $5500 OBO. First question - will my 4610...

The tubings in for my pto are missing can anybody give me a pic of how they look like