I have the opportunity to purchase a 1994 Ford 3930 with a loader. I have brought the tractor home, and have been using it to do some bushhogging around my place. The tractor seems to run well...
Having watched a wonderful video on replacing the fuel injectors on a Ford tractor, see , I decided that would be my next project.
Imagine my surprise when I went to swing out the battery box and...
The right side cylinder on my Ford (New Holland) 3930 front end loader (Model 7309) has started leaking.
Should I look for a re-build kit or just buy a new cylinder.
Any video's on how to repair...
The owner's manual on my 1997 Ford 3930 (New Holland) shows a dual cylinder fuel filter. The filter on the tractor now is a single filter (SF 10082).
Is one arrangement any better than the...
I've had a early/mid-90's Ford 3930 for years, and never had any issues with the tractor...until several months back. Went through multiple episodes of sluggish acceleration/low power, ultimately...
I've run into an odd issue with a Ford 3930 3cyl. We've had the tractor close to 10 yrs, and never had an issue until a couple weeks ago. While bushhogging, it started choking down a bit...and...
I recently picked up a Bush Hog 2400 QT front end loader assembly, and the plan is to mount it on a Ford 3930. The loader assembly came off a Deutz, so I will have to fabricate up the side mounts...
My Ford 3930 calls for hydraulic oil In the power steering unit. It has regular Power steering fluid in it. Are they compatible, or do I need to flush the power steering fluid out before putting...
I have a Ford 3930 that will occasionally make a grinding noise in neutral with the clutch engaged (pedal out). It doesn't make this sound every time, maybe once every 5 times I lift the clutch...
Injector pump and injectors need to be replaced. Does the new components need to match the existing parts numbers? Or, can you just get a pump and injectors new for that model regardless of the...
Trying again here...I can稚 find a 3930 nose body panel or cowl. The fiberglass shell that sits at the front over the radiator. It痴 different from other similar Fords and can稚 find them in the...
I have a 1994 Ford 3930 diesel with 4000 hrs. I was having some steering problems ( hard to turn, unresponsive at times). So I changed everything Hydraulic pump, Steering motor, rebuilt the...
Rebuilding a burned tractor for my brother. Striking out finding a new or used nose cone/cap/cowl. There are aftermarket ones available for 3910s etc but the 3930 and 4630 cowls were different...
i'm having trouble removing the hydraulic pump on my 1995 ford 3930. the one behind the right foot rest. I've removed the mounting bolts but it seems like something else is holding it. lightly...
My trusted Ford 3930 4WD caught fire the other day...total loss. I am looking to replace it but used 4WD 3930s are a lot more than the 2WD. I am wondering if I can purchase a 2WD and bolt up my...
We've got a Ford 3930 MFWA that seems to be leaking engine oil from the back of the oil pan. I figured it probably needs a new gasket. We just recently acquired this tractor about a year ago...
Since the fall my 1992 (I believe) Ford 3930 has been having some starting issues. The starter seemed to getting a little noisy but it would still start. Occasionally I would turn the key and it...
I have a Ford 3930 that is having the fuel solenoid issue. It is not getting enough power to allow the tractor to start. I ran a cable straight from the battery to the switch and it will start...
Tractor starts out fine, but as it warms up the power steering begins to fade and eventually quits. Changing the filter and flushing made no difference. Steering will work approx. 45 minutes...
I'm trying to see if anyone know about or has a manual to the Ford 3930. The PTO when out and no longer runs. I can freely turn the shaft by hand. Turning on the PTO gives no revolutions at all...
I have a 92 Ford 3930 2wd with the manual speed transmission. I have a leak coming out of the bottom of the cover plate that the PTO shaft comes out of. I've removed the bolts and when I start...
An 87 year old friend had a flasher issue with his 3930 tractor. I fixed it and in the process, I noticed the 25amp fuse for the thermostart was missing. I put a new in. Is there a dash light or...
I have an early 90s Ford 3930 2wd. It has an Allied 394 loader with a 2 spool valve. I wanted to add a rear remote so I purchased a BLB BM70-3 valve and installed it on the tractor. After...
The clutch on my 93 Ford 3930 is to the point where the pedal is almost all the way to the top before it engages. It doesn't seem like it's slipping but I haven't really tried pulling anything...
Can you swap out the fuel guage on a Ford 3930 without having to change out the entire instrument cluster? I'm finding plenty of clusters for sale on one but no single fuel guages. I checked the...
Does anyone have any experience on what is involve in rebuilding the hydraulic selector valve on this tractor? I'm talking about the valve in front of the seat that switches the hydraulic from...
I have a 3930 with about 680 hours. I had a problem with mice chewing the wires to the instrument panel. I put the wires back together with splices and was able to get the tractor running again...
I am now on my third engine for my 1993 Ford 3930 45 HP Diesel Tractor.
After 86 hours on the third engine my engine just blew some valves and a head gasket.
Its pretty well finished. I have...
I was over at a friends today that has a 1999 2WD Ford 3930 and he needs to replace the oil pan because he hit a stump.
He was told the pan was $248 and the gasket is $40. My knowledge of Fords...
I have a 1993 Ford 3930 with an Allied 394 FEL. According to the loader specs it should lift 1500 pounds. Mine seems to be maxed out at what I would say is about 1000 (6x6 round bale). It...
I have a 1993 Ford 3930 2wd that I've had for a little over a year. I love the tractor but it's super wide in the back because it looks like a previous owner put shorter wider wheels/tires on it...
There are 4 short hydraulic hoses in the joytick controller for my front end loader on my Ford 3930.
One of them split. Can I find replacement hoses for inside the controller or will I have to...
I have a Ford 3930 and the starter won't turn over. I replaced the battery. The old one was going dead but the new one is fully charged and the starter still won't turn over. The past weekend it...
I have a 1993 Ford 3930 with one of those high stack muffler that extends directly up. The problem is that when I try to mow around trees or go thru bushes and it hits a large branch the muffler...
Hi Guys,
New member, first post. I've used this site a lot when researching various things. I finally got around to signing up.
I have a 1990s (93 I think) Ford 3930 with a manual...
Just got a replacement engine for my Ford 3930 and it is running fine. The problem is this was the first time I bushhoged with it today. When I started I could get it into gear and the clutch...
Hey everybody,
We bought a 94 3930 tractor in Oct. 2013 and it has been great for the most part. It has a Woods loader on the front of it and we are using the rear lift now to roll out hay for...
the 3930 has a rear remote, the loader runs off the remote. The remote valve is mounted on top of the transmission, just below the seat. Is anyone familiar with this tractor and can tell me how to...
I'm thinking about a '93 model 3930, but it is 4 hours from me. It has the 8x8 trans and am wondering if the forward/reverse shift is synchronized. Is the 8x8 relatively trouble-free?
I see that...
I don't know if this should go in this section or in hydraulics, but would like to know what is involved in adding a hydraulic remote to a '93 model 3930. I'm handy with a wrench and if it can be...
Hi
I am a farmer from Saskatchewan and recently purchased a 1992 Ford 3930 yard tractor. I look forward to others comments on this and other subjects regarding tractors
Default Ford 3930 is leaking out of the exhaust
I just bought 1993 45 HP Ford 3930. It runs on Diesel. I paid about 5950. I had it delivered and am having another Dealer check it out. I just...
I just bought 1993 45 HP Ford 3930. It runs on Diesel. I paid about 5950. I had it delivered and am having another Dealer check it out. I just got a call from the dealer I brought it to and he is...
I have a mid 90's ('95 I believe) Ford 3930, and I'm having an issue with the instrument cluster. Rats at some point got in behind the cluster, and have made a mess of the wiring. I've been able...
I have a mid 90's Ford 3930, and has developed a couple of issues. First is a problem with steering at lower RPMs, which I have narrowed down to a low/almost empty PS pump reservoir. Any...
Hey everybody,
We bought a 94 3930 Diesel Ford back in September or October of last year. I felt it needed a clutch but my dad didn't think so, but we went ahead and decided to split and see...
Hello,
Long time stalker, first time poster. Hope someone can help me track down my 2 electrical issues. I have a 97 Ford 3930 that I picked up about 4 months ago.
First, When the tractor is...
I just replaced the starter solenoid on my 3930. It was making a long ccccllliiickkk (Click) before engaging the starter. All wiring put back the same, now the tractor tries to start with the...
I am restoring a 1995 3930 with 8x8 shuttle tranny, that has dual hydro pumps and deluxe remotes. I have tractor disassembled to paint. Remote hydraulics where strong, but 3 point lift was very...
Hello i just purchased a 3930 and it is now blowing smoke and leaking oil. It looks to be leaking from a spot from between the front of the tractor where the oil pan is. Just below the belt. I am...
When bushhogging high grass the grass tends to wrap around where the PTO connects to the bushhog. Is there some type of shield or guard that could prevent this? Thanks in advance for your help.
I removed my pto shaqft and pressed in new seal and bearings. now having trouble sliding shaft back in. stops about 4 inches of home. Any tricks to align it?
Today when I checked the fluids all levels were OK. But, the transmission oil looked milky as if there is water in the oil. The rear end and hydraulic oil is fine. The engine oil is OK too...
I have a Ford 3930. I need to change the engine oil. I bought an ITT manual for information. It provides the quantities for fluids, but it does not state the correct type of oil that is required...
I was at a local dealer yesterday to see the New Holland tractors and on the lot they had a 1993 Ford 3930 tractor, 4 wheel drive with syncro shift and a 195 loader. The tractor was purchased new...
When I got my tractor, used, 4 years ago, there was an incorrect fuel cap basically just crammed into the filler tube. Fit not bad, for what it was, but was one of the first things I replaced with...
The power steering on my 3930 seems slow when the motor is near idle. Is that typical or indicative of a potential problem?
Can you tell me how to check the power steering fluid on a Ford 3930...
I have a Ford 3930 with about 540 hours. I have been happy with it and have really used and enjoyed the FEL on it.
It all seems to work well, but it has a very noticeable whine from the rear end...
I have had rats eat my wiring to the cluster...this is the second time....
I sure need some help. I have seen someone post a picture of a 4610's wiring but have not been able to find a...
I finally acquired a tractor. After looking for far too long, I wound up buying from a family member a tractor which he had previously loaned to me. I put about 30 hours on it while it was here...
Hi all. I have a '92 3930 with 1350 hours. It has developed a problem that is getting worse and I'd like to ask you'all for a tip or two. The clutch works great and it's still strong, no slips, no...
Hi Guys,
Long time viewer first time "poster"
I having trouble with my ford 3930 the transmission will work fine for the first 15 minutes of work without stopping for a break but after the 15...
well my nephew made my day today one of those I wish I had stayed in bed. To cut a long story short the pto engagement arm was just enough off the safety switch that it didn't start, no problem...
Just bought a 1990 Ford 3930, 45 hp, 2wd, no FEL, with only 1400 hrs and new rubber all around. Everything seems to work well. Paid $5500. I feel like I got a good deal. Any thoughts.
My neighbor is offering me a 1997 Ford 3930 with 250 hours on it for around 14K. The machine seems well maintained. It has Ford's FEL with a hay fork. The engine has a turbo on it. (Why would I...
Two questions:
1. Just bought 3930 4x4 tractor and reviewing operator's manual concerning tractor I see two versions of 3930 tractor- 3930 AP and a 3930 N. Does anyone know what's the difference...
I'm looking at a Ford 3930 here locally. I've been looking for a 50 hp tractor for a while now and this one seems good. It is 2wd and has turf tires. I'll have to put R1's on it so that's a...
I have located a refurbished Ford 3930 4wd with a FEL. I believe he said it was a 96 model, can't remember. Asking price of $13,500. Is that about average? Thanks for any help.