Anybody have any info on the latest status of Kubota derived Zen-Noh tractors? Are there likely to be parts available for these units? Have things clamped down such that Kubota dealers flat refuse to sell parts to corresponding Zennoh tractor owners? Is purchase of a Zennoh tantamount to throwning one's money away? Is a Yanmar made Zennoh more safe and secure as far as parts availability now?
Zen-Noh
- Thread starter msjanket
- Start date
- Views: 4534
creekbend
Super Star Member
The forum on "grey market tracters" on TBN might provide some info. Perhaps you should call your local BOTA dealer's parts dept. They may have the answer to your inquiry. Good Luck.
bullbreaker
Elite Member
Here's more info on Zen-Nohs,scroll down to grey market section.
Boone
http://www.orangetractortalks.com/category/tipstricks/
Boone
http://www.orangetractortalks.com/category/tipstricks/
kenmac
Super Member
- Joined
- Feb 13, 2005
- Messages
- 9,835
- Location
- The Heart of Dixie
- Tractor
- McCormick CX105 Kubota MX 5100 HST, Kubota ZD1021, Kawsaki Mule 4010 trans 4x4
Most Yanmar parts are easy to obtain. There are some Yanmars that are hard to get parts for.I doubt a bota dealer is going to help you with parts on a grey bota
lens12
Veteran Member
- Joined
- Apr 7, 2000
- Messages
- 2,113
- Location
- Dixon, Il
- Tractor
- ford 9700, tw30, massey, jd2030 jd4010, yanmar F60d, ym330d, ym276d,ym226d,ym186d, ym2000, ym155
Both Yanmar & Kubota corporate have the same view. They will not support gray market models. That does not mean individual dealers won't help you with parts.
boomer632
Silver Member
- Joined
- Jan 3, 2011
- Messages
- 205
- Location
- Steeler Country
- Tractor
- 2011 LS R4041EZ - 2014 Bad Boy CZT Elite - 1948 Ford 8N
I had a 1976 b7001 which is a gray market tractor. Its US equivalent was the B7100. I bought it for 1600.00. It came with a 4 foot Sitrex fiinish mower, a snow blade and an extra set of rear wheels with the originnal paddle tires. It was in real good shape. I did a pretty nice restore on it after finding it was too small for me. I ended up trading it for a 48 8N that was in decent running condition with new tires, a48 less than 1 year old 6 foot back bladeand and 1000.00. Cash. Moral of the story... just find out the US equivalent of your gray and get parts for it. Worked for me and alot of others.
Maxify55
Gold Member
I've got a YM2210D with an FEL and I love it.
The T290 has a full flow cooling system and never misses
a beat here in the Florida heat.
I've worked it hard for 5 years and if I recall correctly the
only thing that has failed is the rear end locker. (Sync)
The T290 has a full flow cooling system and never misses
a beat here in the Florida heat.
I've worked it hard for 5 years and if I recall correctly the
only thing that has failed is the rear end locker. (Sync)
